Where can I download the adjustment program epson r290. Instructions for using the service program

We carefully read the Readme, if it is not there, then here is what is written there:

RESETTING THE PAMPER OF EPSON INKJET PRINTERS using the ADJ program:
1. Unzip the program into a separate folder. Save the archive.
2. run the file auto.bat, … if it is among the program files.
3. In the opened "start" window of the program, click "accept"
4. In the program window that opens, select, check or set the model, port and "region" of the printer or MFP and then select Perticular Adjastment Mode
5. In the window that opens, select Waste Ink Pad Counter
6. In the window that opens, check (Check or Read) that the counter value exceeds the threshold, and reset (Initialization) the counter.

NOTES:
-Modern Epson Adjustment Programs have several protection options, including:
- restriction on the date of use. As a rule, programs are operational within a month from the date of creation of the .EXE - program file. To remove this restriction, the system date must be set to this interval. (It is enough to set the date of creation of the .EXE program file as the system one). If the program is launched outside the set usage interval, the program will display a message:
ERROR!!! THE PROGRAMM CAN NOT BE USED!
And it won't start.
-At the same time, in the C:\Adjustment Program\ folder, the program will create a folder under "its" name (printer or MFP model) in which it will save "information" about the unsuccessful launch. A second attempt to run the program even with the "correct" system date will be unsuccessful, as long as the "traces of failure" are stored in the C:\Adjustment Program\ folder. To remove this restriction, just delete the C:\Adjustment Program\ folder.
- some programs, when they fail to start, also create an entry in the system registry: the HKEY_LOCAL_MACHINE\SOFTWARE\EPSON\PTSG\ key, which must be deleted to remove the restriction.
- some programs delete themselves from the "launch folder" if they fail to start. That is why the program archive should be kept. There is one exception: if you run the program from the C:\Adjustment Program\ folder, it will not be able to self-destruct.

This is what the auto.bat file does:
-sets the desired system date
- removes existing C:\Adjustment Program\ and HKEY_LOCAL_MACHINE\SOFTWARE\EPSON\PTSG\ (if they are missing, a corresponding message is displayed)
- starts the program
-after closing the program, it returns the system date and deletes the HKEY_LOCAL_MACHINE\SOFTWARE\EPSON\PTSG\ and C:\Adjustment Program\ created by the program.
!!! If for some reason the auto.bat file "does not work", all of the above steps must be done "manually".

NOTE:
To "adjust" the auto.bat file for a specific version of the program, it is enough to
(Content of auto.bat file:

@echo off
echo %date% > currdate.txt
date 23-01-07
rd C:\adjust~1 /s/q
REG DELETE HKEY_LOCAL_MACHINE\SOFTWARE\EPSON\PTSG\ /f
start/wait AdjProg.exe
date< currdate.txt
delcurrdate.txt
rd C:\adjust~1 /s/q
REG DELETE HKEY_LOCAL_MACHINE\SOFTWARE\EPSON\PTSG\ /f)

In the third line, change the date to the date of the EXE file of a specific program, and in the sixth line, change the name of the EXE file to the name of the EXE file of a specific program.
Place the bat file in the program folder and run it...

After a certain amount of ink used during printing and cleaning, the printer will display a message through the status monitor that "Some parts inside the printer have reached the end of their life and you need to contact service center" . The printer is blocked and printing is no longer possible. The printer has 2 red lights blinking alternately - ink and paper.

In this case, you can really contact the SC, or you can reset the software blocking of the printer yourself using the SSCLG universal service utility (a lot has been written about this in our forum) or using a proprietary service program.

Here we will describe in detail the procedure in Russian - what to press and what not to press.

1. You need to download the program (for example, from here).
2. Save on your computer and unpack the archive.

3. Change date on your computer on April 10, 2008. To do this, double-click on the clock in the lower right corner of the screen and change the date in the window that opens. Click APPLY and OK.

4. Run AdjProg.exe file - double click on it. A window should appear in which you need to click ACCEPT.

5. After that, a new window will appear in which you need to select Particular adjustment mode.

6. In the new window that appears, select Waste ink pad counter(waste ink counter).

7. A new window will appear again. Click CHECK to check counter values.

8. To reset the values, check 2 checkboxes and press INITIALIZATION.

9. A message will appear. Click OK.

10. The reset process takes a few seconds and looks like this.

11. To complete the reset procedure, you will need to turn off the printer in order for these values to be saved. After the printer is turned off, a message appears stating that counter successfully reset.

Turn on the printer and check the counters.
The reset procedure in the utility programs for other printer models is similar to that described above.

Instructions for using the service program to reset the "diaper" on the example of the Epson R290 printer. 11 steps

After a certain amount of ink used during printing and cleaning, the printer will display a message through the status monitor that "Some parts inside the printer have reached their end of life and you need to contact the service center". The printer is blocked and printing is no longer possible. The printer has 2 red lights blinking alternately - ink and paper.