Samsung is known throughout the world not only mobile devices, but also high-quality peripheral equipment. MFP Samsung Express M2070- one of the top products on the market, which is a real workhorse both in the office and at home. The only significant drawback of this device is its cartridge, the cost of which is equal to the price of a new printer. However, the MLT-D111S cartridge can be easily refilled.
Attention! Don't risk the performance of your printing devices, refill the cartridge MLT-D111S for Xpress M2020/M2070 printers total
Moreover, advanced users will be able to independently carry out the refueling procedure, performing the necessary steps in a step-by-step mode. To do this, let's look at a clear example in which we prepared cartridge MLT-D111S- compatible with printers Samsung SL-M2070 / M2071 / M2020 / M2021 / M2022.
List of necessary tools for refilling MLT-D111S
Each cartridge refill Samsung MLT-D111S begins with preparing the workplace. To do this we need some tool:
- Cleaning blade;
- New chip, as well as compatible toner analogue;
- Conductive lubricant and powder to lubricate the photoconductor;
- Compact vacuum cleaner with attachments;
- Miniature screwdrivers (flathead and Phillips);
- Needle nose pliers and chisel;
- Electric drill and drill bit 29 mm.
Step-by-step instructions for refilling the Samsung MLT-D111S cartridge
Before the procedure itself, we spread newspapers or oilcloth at the workplace and prepare necessary tool and let's get started:
Stage No. 1: We place the MLT-D111S cartridge with the handle facing away from us, after which, using careful movements of a chisel or chisel, we cut off the three rivets that are on the chipped side.
Stage #2: We remove the end panel, which visually seems solid, but it is composite, so be careful not to damage it.
Stage #3: on the other side of the cartridge panel, cut off four rivets in the same way, after which we slowly remove the end panel, which also consists of several elements.
Stage #4: Let's start removing the hopper with the old toner. To do this, remove the photodrum axis from the side where there is a hub. We remove the photoconductor and make sure that its fragile holders remain in place.
Stage No. 5: Now we remove the blade to clean the hopper, after which we take out the large gear and clean the used toner from the photodrum so that the seal of the blade itself does not get dirty.
Step #6: install the two screws and the cleaning blade in the reverse order, then clean the charging shaft and install it back into the cartridge so that the guide elements are in the desired position.
Step #7: We first insert the photodrum from the side where the hub is located, and then move its axis through the gears and the toner cartridge panel. We mount the drive gear and place the prepared part of the consumable aside.
Step #8: remove three gears from the second half of the MLT-D111S cartridge and place them to the side, then remove the developing shaft gear by pressing on a small tongue.
Step #9: unscrew the screw and remove the inner panel, and then remove the developing shaft itself, lifting it from the side where the sleeve is located.
Step #10: remove two screws and remove the squeegee. This will allow the remaining toner to be cleared through the developing roller opening.
Stage No. 11: we clean the felt seals and the feed roller from the old consumables.
Step #12: Now you have to refill the Samsung MLT-D111S cartridge with a compatible analog toner, which must be slowly poured into the hopper.
Step #13: We clean the dosing blade and then install it, securing it with two screws.
Step #14: Let's install the developing shaft and the inner panel, after which we proceed to install the four gears.
Step #15: We connect both halves of the cartridge, while making sure that all the springs are installed in the correct places.
Step #16: We install cartridge panels that block access to the gears (we install the top panel first).
Step #17: We take a drill and drill holes in the places where the factory rivets were, and then tighten the screws. We replace the old chip, making sure that it is correctly installed in the connector. Install sidebar and also drill three holes in it, in which we tighten the screws.
Stage #18: Let's put on the cover of the photodrum itself. This means that refilling of the Samsung MLT-D111S cartridge is complete.
This toner replacement algorithm can be used by both an experienced user of office equipment and a beginner, but at the same time, you must remember the responsibility that will fall on your shoulders. If this is the first time you have decided to do all the steps yourself, then be kind enough to carefully follow each step, because due to excessive initiative, refilling the Samsung MLT-D111S cartridge can result in an expensive repair for your printer.
Characteristics
Printer manufacturer: Samsung
Refilling the Samsung MLT-D111S cartridge
Black color
Resource: 1500 pages
The cartridge is used in printing devices:
Printers:
- Samsung Xpress M2020W
- Samsung Xpress M2020
- Samsung Xpress M2022
- Samsung Xpress M2022W
Multifunction devices (printer/copier/scanner):
- Samsung Xpress M2022W
- Samsung Xpress M2070
- Samsung Xpress M2070W
- Samsung Xpress M2070FW
An urgent visit is possible, within two hours the mechanic will be at your place and your printer will be back in operation!
Where to refill mlt-d111s?
A resource of 1500 pages is maximum amount prints that can be produced when using consumables. The resource is indicated in A4 pages at a certain percentage of them filled with toner, usually 5%.
MLT-d111S refill, guarantee!
We provide a quality guarantee - after our refilling, the cartridge will print no less copies than the original! Refueling can be done by our technician at the call address, or we can pick them up and deliver them by courier to you the next day.
The main feature when working with this cartridge is the requirement to flash the printer itself. But this process is easily compensated by the fact that almost all printer devices that work with the Samsung MLT-D111S cartridge are absolutely reliable and technologically simple to use.
The generation of printers using the Samsung MLT-D111S cartridge is an innovative device. The consumer in the modern market is undoubtedly interested in the question of the quality with which the equipment carries out duplicating copies.
But the client is no less, and sometimes even more interested in the question of the cost-effectiveness of the technology he uses. Printers using Samsung MLT-D111S cartridges are characterized by innovations that work in the area of economy.
When introducing saving modes, there is no talk of reducing the copy quality itself. Samsung engineers and technologists have developed technology that has led to a revolution in the field of documentary copying. All printer devices that use Samsung MLT-D111S cartridges provide the specialist working with them with the opportunity to pre-print a document intended for copying.
Before copying a document, the client has the opportunity not only to view the sample intended for duplication, but also to directly influence the quality of the duplicating print. It is also possible to remove errors or elements that have lost their relevance. Separately, the function of selecting a printing mode with maximum savings and much more is considered.
Currently relevant are the services on which the functioning of systems or entire work complexes depends. In particular, this applies to refilling cartridges (inkjet and laser, color and monochrome), thanks to which high-quality and efficient operation of printers and business development are possible. Therefore, providing this service is the main activity of many companies. And this article will help you find out how the process of refilling cartridges for different models printing devices for Samsung models.
Refueling procedure
Each refill of a Samsung cartridge is a procedure to increase the working life of the consumable element. And in order for the workflow to take place without compromising the quality of the printed images, you need to purchase only high-quality toner (powder) for refilling, and also strictly adhere to the technological instructions. In addition, when refilling cartridges, if such a procedure is performed in service centers, specialists inspect and diagnose working parts, the condition of which determines the functioning of the cartridge and the printer as a whole. Moreover, provided by company specialists, the main area of activity is refilling cartridges for any device models, which can extend the service life of the equipment. Therefore, many users of printing devices prefer the services provided by professionals to refilling themselves.
Refilling a cartridge that is equipped with a CHIP requires replacing or reflashing the CHIP. In this case this service allows you to use the maximum possible resource of the consumable element without the need to purchase an original cartridge.
Flashing
Replacing the CHIP installed by the Samsung manufacturer to control printing and the amount of toner consumed is the introduction of updated adjustments to the firmware of the printer or MFP, which ensures the operation of the device provided that the starter (original) cartridge is used. Typically, a starter cartridge is included in the purchased equipment, and after some time (after a certain number of issued prints) it stops working. Usually the situation looks like this: after 2000-6000 pages are printed. (this quantity is set by the manufacturer individually for each specific model Samsung) the printer is blocked and printing on it stops until the used consumable element is replaced with a new, original one with a CHIP.
To remove the blockage and at the same time avoid purchasing an expensive original cartridge, the printer user Samsung devices can contact a specialized company that will not only refill the cartridge, but also install an update for the normal functioning of the equipment.
How to refill monochrome cartridges
Offices often use high-performance printing devices and Samsung MFP, allowing working groups to receive large quantities of high-quality printed products every month. Therefore, the use of laser monochrome (Samsung Xpress M2020, Xpress M2070/2070W, SCX 3400/4200, etc.) and color (Samsung CLX3305) is quite common. Consequently, the service of refilling cartridges compatible with certain Samsung models, is also in demand.
Therefore, using the example of cartridges compatible with several models of Samsung printing machines (Xpress M2020, Xpress M2070/2070W, SCX 3400/4200, ML-2160, 2165, 2165W, etc.), we will tell you how to refill them.
The Samsung MLT-D101S monochrome cartridge can be used to print on SCX-3400/3405 printers. This black toner cartridge is also compatible with ML-2160, 2165, 2165W.
First of all, before starting the procedure, it is necessary to equip the appropriate workplace. To do this, cover the working surface of the table with newspaper and put gloves on your hands.
To refill the MLT-D101S cartridge, first of all, remove it from the device. To refill such a consumable item, the structure will need to be disassembled into 2 parts. To begin with, it is worth cutting off the plastic guides on the consumable element that secure the plugs on the sides. After removing the right plug, you should pull out the metal rod that fixes the photo shaft. In this case, you should pay attention to the springs on the back that press the cartridge flaps so that when separating the halves you do not lose them. After this you can plug it on the left side. You can now separate the halves of the MLT-D101S cartridge.
The next step is to clean out one half of the consumable and refill the second. Open the reservoir cap and pour toner into it. To refill the MLT-D101S cartridge for laser devices ML-2160, 2165, 2165W, SCX-3400/3405, you can use toner powder for ML-1210/1710. This ink powder, like any other, is toxic. therefore you need to work with it carefully. When one reservoir is filled with toner and the other is cleared of waste, the cartridge can be assembled, taking into account the reverse sequence. Once assembly is complete, you can use small self-tapping screws to secure the plugs, screwing them in instead of the cut plastic guides.
After the MLT-D101S cartridge is refilled and assembled, it should be reflashed, since the Samsung CHIP installed by the manufacturer of office equipment will, even after the refilling procedure, block the operation of the device and the printer will not print. This way you can refill MLT-D101S cartridges for laser printers ML-2160, 2165 and MFP SCX-3400, 3405.
To print on Samsung printers Xpress M2020, Xpress M2020W uses an MLT-D111S cartridge with a resource declared by the manufacturer of about 1 thousand pages. It is also compatible with other devices: Samsung Xpress M2070/M2070W/M2070F/M2070FW. And in order to refill this cartridge and use the printer for its intended purpose, you should, as in the previous case, first prepare the working surface.
Next, having removed the MLT-D111S cartridge from the device, the plastic directions on its sides are cut off, which allow you to remove the plugs. By removing them, the cartridge can be divided into two halves. By removing the next side covers, you can dismantle the photodrum. After this, the white gear is removed, allowing the primary charge shaft to be removed. After this shaft is removed, you need to unscrew the screws holding the squeegee, and then remove it.
After disassembling and cleaning all the elements from toner residues, the Samsung SCX-4200 cartridge can be assembled, then pour powder into the corresponding hole on the left side and, closing it, install the cartridge into the printer.
How to refill color cartridges
The procedure for refilling a color cartridge can be considered using the example of the Samsung CLX3305 device, for which the CLT-K/M/Y/C406S consumable element is suitable. This procedure is very complicated in that the operation of the device will be blocked by the chip installed by the manufacturer. Therefore, in addition to refilling the cartridge, the device will need to be reflashed.
To refill the cartridge for the CLX3305 color laser MFP, toner from the CLP-300 is suitable. Having prepared high-quality powder in colors corresponding to the cartridges (BLACK, CYAN, MAGENTA, YELLOW), and equipped the work surface, you need to remove the cartridges one by one. Having disassembled each one to clean the components (shaft, blade, body), you need to drill a small hole on the top cover of the cartridge for the CLX3305 to add powder there. All these manipulations require caution, as there is a risk of damaging the case, which will lead to damage to the CLX3305 cartridge. Therefore, many users of Samsung CLX3305 color MFPs prefer to contact specialized centers for refilling, flashing and restoring cartridges.
Below is a video on the topic of refueling:
Loading...