Old tp link router. How to connect a Wi-Fi router TP-Link - quick setup

Hi-hi everyone!! Did you know that connecting and setting up a network on a router is scary even for experienced computer users. Why set it up yourself, if you can call a specialist who will quickly do everything.

However, I’ll tell you that you don’t need to suffer yourself, the process of setting up and connecting TP-link router models is quite simple, especially if you follow these steps according to my instructions. In today's article, a step-by-step explanation will allow you to set up and distribute the Internet to all devices in just an hour. Yes, yes, and you should not spend extra money to call a specialist, when you can set up a tp link router yourself easily and quickly.

Explanation: the instruction is suitable for modern TP-link models (not older than 5 years). The settings menu may be slightly different, but you will find the same items. So let's go...

How to set up a tp link router preface

Before proceeding to configuring the router, you need to deal with network settings Internet connection on your computer. Let's say a cable is connected to a laptop or PC. Today, the following options are most often used network settings:

— PPPoE- users can use the Internet only after entering the login and password;

--- Dynamic IP– the system automatically sets parameters of this type, they are issued via DHCP;

--- static IP- the option is used extremely rarely today, since the user needs to manually enter the parameters.

As for the operating system, the process is carried out similarly on Windows Vista, 7, 8 and even on Windows 10. We need to go to the menu " Start" and find the tab " Control Panel" - go to " Network and Control Center public access ».

Now go to the tab " Change adapter settings».

Select active " Connection via local network » (the icon should be blue). Click right click mouse and select context menu paragraph " Properties».

Do not be afraid of a large number of items and settings. Usually, many users panic when they see a large number of the settings stage, and they do not know how to configure the tp link router. There is nothing difficult. We need to highlight in the window " Internet protocol version 4" and then click on the button " Properties».

There can be two options here:

1. If the automatic IP address acquisition mode is selected in the settings, then it will be easy for you to connect the router and set the parameters, because the settings will come automatically via DHCP (this is the Dynamic IP option).

2. If you see filled items in the window and the active inscription " Use the following IP address”, then overwrite all settings. You have selected static provider settings that do not change - this is Static IP. Place a check mark next to " Obtain an IP address automatically” and confirm your action by pressing the button “ OK».

Blocking access to the Internet by MAC address

This item applies only to those users whose ISP automatically blocks new connections. You can find out for sure this information in the contract. To get around this point, we need to make sure that the router receives the same MAC address that is registered with the provider. Finding the MAC address is pretty easy.

We go to the menu and in the search bar we enter the command " cmd" and press the "Enter" button.

After that, a command console will appear in front of you. We need to enter the command ipconfig /all and confirm your action by pressing the button " Enter».

You will see a list of all possible parameters, but we need data from the section " Ethernet adapter - LAN connection". You will learn more about how to find out the mac address and what it is from this article:

How to set up a tp-link router: Detailed connection

So, you can proceed to the settings, check that the following elements are at hand:

A- TP-Link router - the basis that will distribute the Internet to all kinds of devices;

B- provider cable;

C- laptop or personal computer.

The connection is elementary - this can be seen from the diagram. The cable from the power supply that comes with the router is inserted into the connector called Power. We insert the cable of your provider into the main WAN connector of the router, usually it is highlighted in blue. The computer will connect to the TP-link router using a network cable that plugs into any yellow LAN port.

Done, other devices (tablets, phones, TVs, laptops) can be connected already via WiFi connection. It's time to move on to the next point of our today's question - how to set up a tp link router.

The process of setting up a tp-link router

Setup starts with logging into the browser Internet Explorer. Enter the following address in the input line: 192.168.1.1 . If you have ever set up a proxy server, then you need to disable it. After entering the address, a security window will appear in front of you: login - admin, password - admin. By the way, on the bottom of the router itself you will find your username and password, take a look, do not be lazy!

The router window will appear in front of you. We need to choose a master Quick Setup» ( quick setup) and press " Next" (Further).

Instructions for Dynamic IP - automatic settings.

If your provider provides just such settings, then check the box next to Dynamic IP and click the "Next" button.

Now we set the basic settings:

- In field SSID the name of the future point is set WiFi connections.

- Chapter Wireless Security is responsible for the type of encryption - specify WPA-PSK.

- In field Password you must enter a password.

The rest of the settings in this window can be left untouched. Press " Next". The installer will inform us that the settings have taken effect. Click on " Finish and use Wi-Fi from all devices.

Explanation for users whose provider blocks access by MAC address: again go to the router menu and select the item “ network", and then -" MAC Clone". In the appropriate field, we drive in the characters we recorded. If you see that in the field " You PC's MAC» already have data, then just click « Clone MAC". Don't forget to save your settings by clicking the " Save". I also suggest that you find out how to set up a tp link router with static parameters.

Instruction for Static IP - static parameters

At the beginning of the instructions, we determined what network settings are on your computer. And if you have a Static IP, then select the appropriate item in the TP-link customizer.

The settings correspond to the data from the local network connection, so there should be no problems, but if the installer is in English, then you may not understand some terms:

Default Gateway- main gate;

Primary DNS– preferred DNS server;

Secondary DNS– alternative DNS server;

subnet mask- Subnet mask.

After completing the data entry, press " Next».

Next come standard settings. In chapter " Wireless Security"You need to select the type of encryption - put a tick in front of" WPA-PSK". Field SSID intended for entering the name wireless network. Do not forget to put the password in the field PSK Password(at least 8 characters).

Done, the installer tells us that for the settings to take effect, you need to restart the router - click on the button " Reboot". If you have problems with the MAC address, then use the instructions above - it works for all types of connection.

Instructions for PPOE - logging into the network using a login and password

If you have the PPPoE protocol set, then check the box next to the item with the corresponding name.

Here the setup is no different from other connection options. We drive in a password to protect our wireless network from "uninvited guests" - it must be at least 8 characters. In field Wireless Security you need to set the option WPA-PSK". As for the field SSID, it is for the name of your network.

Done, setup completed successfully. Click on the button " Reboot» - after the reboot, the settings will take effect and you will be able to connect to the wireless network. So, we have discussed how to configure a tp link router if your provider uses automatic or static parameters.

I suggest you take care of the security of your Internet. I can recommend you to read my articles:

Setting up security for a wireless network

The password does not guarantee that third parties will not be able to use your Internet. They can simply go into the settings of the router itself and see your password. To prevent this from happening, go to the router settings program and drive in the following parameters:

Old User Name- enter in the admin column

old password- this is the old password, by default we set admin - enter it

New User Name- this does not affect security, so you can leave it as it is

New Password- drive in New Password to configure the router (not to connect to it).

Confirm New Password- enter the new password again to confirm.

Connecting to a wireless network

We have created a wireless network, but users may have questions about connecting to it. Using the example of a laptop, I will explain this process. On phones, tablets and TVs, the process is exactly the same.

In the lower right corner, click on the wireless networks icon.

The router will ask you for a password - enter it and press the button " Connection».

Important!!!: Enter the password that was specified in the field PSK Password. Sometimes users get confused and enter a password to edit the router settings. If the data was entered correctly, then you should have wireless Internet. The password will be automatically saved so you don't have to re-enter it every time.

I am attaching a video to this article, which clearly and clearly shows how to set up a tp-link router

At the end of today's article - how to set up a tp link router, I suggest that you familiarize yourself with the most common problems when setting up a router.

1. If you forgot your password

The problem can be solved very simply. We pick up the router and find a small button on the back with the name "RESET". We hold it for 10 seconds, after which the router will return to the factory settings. Go back to Internet Explorer and enter the address 192.168.1.1, login - admin, password - admin. After that, you can configure access again and specify a password that suits you.

2. Problems with the connection and operation of the router

Some problems that may arise when trying to connect to the router can be solved by yourself. Sometimes the reason for the lack of connection is a mechanical malfunction of the gadget.

3. I can't access the address to configure the router

This problem is common among TP-link users. To get rid of it, you must perform the following steps.

First of all, you need to check what is set in the wireless connection settings. If the DNS and IP address should be set automatically, and your checkboxes are unchecked, then check them again. After that, you can go back to the address and configure the router.

4. Can't connect to router

Sometimes the router does not allow a certain device to connect to the wireless network. To find out what the problem is, you need to try connecting from another gadget - a computer, tablet or smartphone. If the router does not accept all devices, then try rebooting it. After that, everything should return to its place.

If we are talking about a separate device, then the problem is most likely in it. Check if the corresponding checkboxes are checked in the Wi-Fi connection settings. Sometimes the gadget perceives your network as unsecured, so it does not allow you to connect to it. Set the options to allow connection to unidentified wireless networks.

Sometimes it helps full reset settings. To do this, hold down the RESET button for about 10 seconds (located on the back of the router). After this action, the chance of proper operation will increase markedly. The main thing is not to forget to drive in new parameters.

5. The device does not see the network

Unfortunately, there are many reasons for this problem, so you need to go through all of them. If the laptop does not find the network, then first of all it is worth checking if the Wi-Fi module is running. To do this, go to the network control center, then click on the "Adapter Settings" tab. If wireless connection inactive (gray), then it should be enabled. Most likely, after this step, you will be able to connect to the network safely. We also recommend checking the hardware switch to turn on and off the Wi-Fi module.

If the module is running and everything is enabled, then you should check the drivers. This applies primarily to laptops. Not always in operating system there are the necessary network drivers for a specific laptop model. Checking this guess is very simple: right-click on the “my computer” icon, select “ Properties"and go to the tab" device Manager».

The screenshot shows a list network devices. In this case, they are all working and have a suitable driver package. You can see a yellow triangle opposite the network icon, which explains that the device is not working properly.

You can solve the problem simply: go to the website of your laptop manufacturer, find your model and download network drivers. After that, you will be able to connect to the wireless network.

6. Problem in the device

Sometimes it is not possible to detect a defect for the reason that the malfunction lies in the device itself. Therefore, you should not puzzle over the question: how to set up a tp-link router if I followed all the above requirements and everything was successfully configured. In this case, you must take the router to service center under warranty (if any).

The defect can be mechanical or software. If everything is clear with the mechanical, then a software defect implies a malfunction in the firmware of the router. You can restore it yourself, but this process is much more complicated than setting it up. Also, incorrect firmware installation or a failure can completely disable the router completely.

So, already summing up today's article, I would like to tell you that you cannot always connect to the Internet because of the router. There may be some network problem. To test this, unplug your ISP cable from your router and plug it directly into your computer. After that, go to the network and sharing center. Enable LAN connection and try to access the Internet.

If it works, then the problem is really in the router. Sometimes a device won't allow a certain device to connect. To remedy the situation, you can try pressing the automatic router button, which is located on the back of the router. All active devices with enabled Wi-Fi modules will connect automatically.

Well, for today, everything that I wanted to tell you about today in terms of: how to set up a tp-link router. I hope the article was interesting for you. I would be glad if you have something to add to all of the above. I'll see you in . Bye bye everyone!

In our homes there are more and more more devices who have access to the internet.

Computers, laptops, tablets, smartphones, Wi-Fi printers, and even TVs, but in order to take full advantage of their capabilities, they must have access to the Internet.

For this reason, in most homes, it is necessary to install a router to provide wireless communication for the internet.

One of the most popular manufacturers of such equipment is the TP-LINK router.

There are a lot of such routers on sale today. Here are the most popular ones today:

Tp link tl wr841n, wr740n, tp link td 786, wr741nd, wr840n, wr940n, w8901n, wr841nd, tp link wr842nd, w8151n, mr3420, wr941nd, w8951nd, tp link td w8961n, w89p link archer c20, w8968, wr741nd, mr3220, wr842n, wr340gd, mr3020, tp link аист, wr1045nd, w8950n, mr3420, wr743nd, ac750, wr1042nd, tp link archer c2, wa701nd, wr1043nd, wa801nd, wr942n, td854w, wa801nd, wr340g, w9970 , adsl2, n150, n600, w8951, dir 615, wa901nd, dir 320, w8101g, n750, dsl 2740u, wn722n.

As you can see, there are many of them, but the settings are almost the same. Therefore, I will not stop, but will write a step-by-step instruction common to everyone, so that you can independently, correctly connect and configure your tp link router on a computer or laptop.

NOTE: from windows version: windows 7, windows 8, windows 8, windows 10, windows 8.1 does not depend on anything, as well as on the operator (except if password protection, name and others are provided), whether for Rostelecom, Beeline Kyivstar, Ukrtelecom, Dom ru , Ufanet, Luganet, Will and so on.

It’s easiest to set up the router mode yourself or yourself if a disk is attached, but you can do it without a disk manually and even without the Internet, only if there is no Internet, then you won’t need a router, because its task is to distribute the Internet via wifi.

Usually you only need to set up a new one, but there are times when you get lost, then you need to set up wifi in a new way, and in some cases, reflash it.

I will use the configuration of the cheapest and most popular TP-LINK routers on the CIS market.

Instructions step by step in Russian how to set up a TP-LINK router to distribute wifi

Turn on the adapter first alternating current supplied with the router and connect the power.

Press the big black button - some LEDs on the router panel should light up.

You will also need two cables: one for the internet (connected to the router) and the other must be connected to the computer/laptop.

These cables (commonly referred to as " twisted pair”) end with a characteristic connector and are visible in the picture.

Connect the cable connected to the computer to the blue connector on the back of the router.

Connect one end of the cable that comes with the router to the yellow socket with number 1 on the router, and the other end is connected to the computer instead of the disabled cable Internet.

Step two in setting up a TP-LINK router via cable

Launch a browser (such as Internet Explorer, Google Chrome, Mozilla Firefox etc.) and in the address bar type: 192.168.0.1 and then press ENTER.


You should see a window asking you to enter your username and password. Enter "admin" in both fields and click "OK".

You should see the router's configuration page. By clicking LMB on the “Quick Setup” option (you can quickly set it up this way, and if you are not in Russian, then click - Quick Setup).

The tab will change. Choose your location and provider. If you do not find your Internet provider in the list, put a bird in front of the line: “I did not find suitable settings” and click “Next”.

Step three in setting up a TP-LINK router without a disk

Here you may need a provider to find out which item to choose. If the settings are automatic, select the first item and click next.

All these settings can only be obtained from the Internet provider (for example, I choose the first item).

Now you have to specify or not specify the mac address, which also depends on the provider. In general, the mas address is unnecessary, it is assigned only to prohibit unauthorized access to the Internet.

If you need to specify a provider, they will tell you which one. Write it down and click next again. I don't provide an example.

Step Four in Configuring a TP-LINK Router to Distribute WIFI

Click on the menu on the left on the line: "Wireless mode", enter the name of the network (any) and wifi mode(see picture).

The first time you connect your device to a wireless wifi networks in your home, you will need to enter this password (it will be stored in the device later on and you will not need to enter it).

The password must be at least 8 characters long. After clicking the "Next" button, the last mode of the Quick Settings window will appear.

After pressing the "reboot" button, the router will reboot - wait until the page refreshes itself.

After the reboot, the device is ready to go - check that the Internet is working - to do this, open any web page.


Of course, only general settings are provided here, we can say the most common settings (basic).

Sometimes you need to specify a few more settings, but they are known only to the ISP.

If you can’t set up your TP-LINK router on your own, then in the comments I can only suggest basic settings e.g. speed, ports and so on, but some ISPs (especially well-known ones) set powerful protection so that their Internet is not "stealed".

These data are known only to them. Then call and ask. Usually they will guide you through all the settings, even over the phone, and I say goodbye and wish you success.

Category: Uncategorized

- favorites among devices that supply Wi-Fi. They are given the championship cup for their laconic design and a wide range of activities. Finding a model in the collection that is suitable in terms of design and characteristics will not be difficult, but in order to understand the settings of the router, you will have to “sweat” a little.

To help beginners, the article offers brief instructions on how to connect a router to a PC and start using the Internet without wires. The guide consists of 5 stages of quick activation, upon completion of which it will be possible to catch wi-fi anywhere in the apartment.

Determination of the IP address

The first item is the search for network settings for authorization. There are only three types of them:

  1. Dynamic (Dynamic IP);
  2. Static (Static IP).
  3. Access via PPPoE protocol.

And now - how to get them. For example, a user with Windows 10, to which the provider's cable is connected. Internet is active. In this case, to find out the address of the operator, a person needs to go through the following route:

  • at the beginning, click on "Start" - "Settings";
  • then find the inscription " Homepage»;
  • in the proposed options, activate the "Network Control Center".

Now the "Change adapter setting" field.

The screen will display a column with the word "Internet". Click on "Properties", and after that - in the list of "IP version 4 TCP / IPv4" one more click on the field with the same name.

The above maneuvers were carried out in order to find out the type of connection to the operator (see where the default icon is). If it is located in the "Obtain an IP address automatically" area, then synchronization is performed through Dynamic IP. In this case, you can activate all the settings in an instant, without spending time and effort. The process is carried out independently of the actions of the user.
When the “Use the following IP address” field is active in the window and the numbers in the cells are indicated, this indicates the use of Static IP. In this case, the received data should be written out on a piece of paper, because they will be useful for subsequent actions with a router like.

Why was all this necessary? WITH this stage upcoming WI-FI settings router TP-Link will depend on the received IP address and differ in their set of procedures. But more on that later.

Installation and regulation of device activity

It's time to connect your purchase to your laptop or for Wi-Fi usage. In the process you need:

  • provider cable (by this time it should already provide Internet access to the house);
  • patch cord (power cord);
  • actually, a computer;
  • router of the selected model.

At the next stage, these elements must be assembled into a single structure. There are several connectors on the back of the router. Most often there are 4-5 of them, while TP-Link painted these ports in a different tone. It is important to remember that the blue Wan connector is used only for the Internet cable (there is only one), and the rest are for synchronization with a PC.

You may be interested in information:

The connection process consists of 4 steps:

  1. We take out the provider patch cord from the laptop.
  2. We rearrange it to the Wan connector.
  3. We fix the selected router to the laptop with a power cord.
  4. Connect the device's power supply to a power outlet.

It remains the case for small things - to correctly configure the reception of the network.

On reverse side router (for example,) its basic data and factory settings are indicated. From this information, you need to select the site address and enter it in the search column of the browser. A window immediately opens with fields for the login and password, which are written in the documentation or on the same sticker.

After that, the user has access to tools to change the functionality of the device. Let's start with the local network. The “Quick Settings” section is selected, in which you need to fill in all the fields: come up with a security password, the name of the wireless network, determine the number of channels, signal reception time, etc.

Only after completing these steps, you can proceed to the activation of the free use of Internet space. To do this, open the "Network" and "WAN" tab. The first thing that appears at the top of the window is the connection type. This is the same IP address that was already determined using the instructions in the previous section. Depending on it, the further process has three different options.

It is worth noting that the web interfaces of all TP-Link models are similar to each other (and this is no exception). Understanding the key points is easy. Here are the basic data that you need to know to fill in each of them:

Connection type

 Setting information
Dynamic IP The configuration is automatic, without any input by the user.
static IP In this case, you will need:
IP Address (IP address);
Subnet Mask (Subnet mask);
Default Gateway;
Primary DNS (Preferred DNS server);
Secondary DNS (Alternative DNS server).
PPPoE It is enough to know the username and password of the user.

Dynamic IP - network configuration in automatic mode

If the operator provides the user with Internet communication services through a dynamic address, the entire activation process takes a matter of seconds.

To establish a connection you need:

  • find the Dynamic IP item in the WAN list;
  • save changes;
  • go to the section System Tools - Reboot;
  • restart the device.

Now all the settings have begun to take effect and you can safely use the World Wide Web.

Static IP - use provider data

If the connection to the operator occurs using a static IP, first select in the WAN line desired option addresses. A window will appear on the screen where you need to enter the provider's data. If they have already been written out on a piece of paper in advance, then problems should not arise here. The information is registered - click on the "Save" field. Further, similarly to the previous option, you need to restart the router.

PPPoE - remember login and password

Selecting this type of connection from the proposed menu, you need to fill in a few data:

  1. The subscriber's name and password, which is registered in the agreement with the provider.
  2. Mode of operation, that is, determine the exact hours or around the clock.

After that, click the "Connect" button. Within a few seconds, the device will be ready for use. You can make sure that the router is active at the bottom of the section. It should say "Connected".

Router Security: Quick Setup

In order not to distribute free Wi-Fi to all neighbors, it is better to immediately put protection on it. The most secure encoding is WPA-PSK/WP2-PSK.

Activating it is very simple:

  • section "Access Control" or "Security Setting";
  • mark next to the column with the desired name.

A prerequisite for a secure line is the presence of a cipher. You need to invent it, add it to the line and, preferably, remember or write it down. The cipher must contain at least 8 characters. It is better to use Latin letters mixed with numbers. When finished, be sure to restart the router. Thus, all the changes made will remain in the system.

Internet connection to the device

The final part of setting up the TP-Link router is turning on the laptop to receive a signal from the router. On the strip at the bottom of the screen, you need to find and select the network activation icon by clicking on the model name from the proposed list. To activate it, you need to enter the previously created password. Now left-click on the "Enable" or "Save" button. To test the operation of the device, we go online to any of the sites.

After that, you can synchronize any devices that support the Internet with Wi-Fi: a set-top box, other gadgets.

How to recover a lost password?

It happens that after a while the password for accessing the router settings is forgotten. If this happened, no problem.

The problem has several solutions:

  1. You can restore all original settings using the Reset button on the device panel.
  2. Log in to the web service from any connected device and see the forgotten password.
  3. Try the default admin/admin login credentials. Perhaps they haven't changed.

Choosing the first option, you will have to go through all the installation steps again.

Summary

At the end of the instructions TP Link connections router, it remains only to consider a few mistakes that beginners make when connecting a device:

  • before starting the activation process, the Wi-Fi button located on the back of the case is not pressed;
  • the username matches the name of the router model, which is why it is lost in the list;
  • operator parameters are incorrectly specified;
  • the wrong connector is selected for connecting the patch cord.

It's simple, nothing fancy. If you penetrate, then the connection TP-Link router will take no more than 5-7 minutes. It is important not to rush and carefully follow the instructions.

In this article, I will tell you how to set up a TP-LINK router. Specifically, we will talk about setting up a router. TL-WR841ND, but since the admin panels of all routers of this company are very similar, you can also configure another TP-LINK's router. This will not be a mega-review of all the capabilities of the router, because. there are a lot of them. I will consider only those tabs that are needed ordinary user to set up a router for your home.

Of course, you can set up a connection using the disk that comes with the router, but unfortunately this does not always work out. Therefore, I prefer to do the configuration manually. Moreover, the setup takes 10-15 minutes.

So the first thing you need to do is find out your connection type and Internet connection parameters (IP address, subnet mask, login, password). Typically, this data is provided by the provider along with the contract (agreement) for the connection. If you did not find them or lost them, then you will have to contact the provider's technical support service to get them.

Let's say we have data. Now let's proceed to the actual configuration of the router.

1. Connect to the router
Insert the power cable of the router and connect it to the network. Press the power button on the router.

Then insert the network cable (included with the router) with one end to the network card of your computer, and the other end to the LAN port of the router (yellow).

2. We go to the admin panel of the router
Now that the router is physically connected to the computer and network connection between them is configured, you need to open any browser (Internet Explorer, Opera, Firefox, Chrome) and enter the address of the router in the address bar (for TP-LINK, by default, this is the address 192.168.1.1).

Then a window will appear in which you need to enter your login and password to access the admin panel (by default, Login: admin and Password: admin).

In general, the factory login and password are basically always indicated on the bottom of the device.

Therefore, even if you have a different router, even from a different manufacturer, then look at the sticker at the bottom of the device.

If you entered everything correctly, you will see start page admins:

On the right - a column of sections, in the center - the contents of the section and the fields where we will change the settings, on the right - a little help, but unfortunately it will not help many people. it is in English.

Do not rush to be intimidated by a lot of sections, but most of them are for advanced users and for fine tuning router. In order to simply force the router to connect to the Internet and then distribute the Internet via Wi-Fi and via the local network, 3-4 tabs are enough.

3. Set up an Internet connection
To configure the Internet on the TP-LINK router, go to the Network section (in the right column in the admin panel). Next, go to the WAN subsection

I hope you have already learned your settings for connecting to the Internet. In Ukraine (and indeed in the CIS), the following four connection methods are most often used by providers: Dynamic IP, Static IP, PPPoE, PPTP. Select your connection type in the drop-down list (top center) and go to the appropriate tab below:

Connection type Dynamic IP (Dynamic IP)
For this type of connection, you do not need to enter anything. Just select it from the list. For some providers, you may need to enter DNS server addresses, but in most cases this is not required.


After that click on the Save button.

Connection type Static IP (Static IP)
For this type of connection, you need to enter your IP address, subnet mask, gateway address, and possibly DNS server addresses. All these settings can be obtained from your ISP.


When you enter all the addresses, do not forget to click on the Save button

PPPoE connection type
For this type of connection, you must enter a username, password, and password confirmation. Also, for the CIS, you will most likely have to put a dot Static IP in front of Secondary Connection and enter the IP address and mask.

If you want the router to always be connected to the Internet (usually it’s better to set it if you don’t have per-megabyte traffic accounting), then you need to put a dot near the Connect Automaticaly item

PPTP connection type

If the provider binds to the MAC address of the network card (the unique address that the network hardware), which is mainly relevant for the Dynamic IP and Static IP connection types, then you need to additionally go to the MAC Clone subsection and click the Clone MAC Address button. Wherein MAC address router will become the same as the MAC address of the network card and the provider will not detect that you have installed a router.

4. Set up a Wi-Fi network on TP-LINK
For wifi settings network we need 2 subsections. First, go to the Wireless section and the Wireless Settings subsection.

Here you only need to select your country from the list and enter the identifier network SSID. You need to come up with a unique identifier so that it does not accidentally coincide with the network identifier of your neighbors, otherwise failures may occur. Usually it is enough to add the apartment number to the network name (for example, TPLINK33)

Let's briefly consider the rest of the parameters (in most cases they do not need to be changed):

Channel - radio channel selection, if the devices do not connect well to the wi-fi network, then you can try to specify the channel explicitly (I usually choose 6 or 11)

Mode - the choice of standard, if you do not have devices that can work according to the 802.11n standard (which standard the device can usually work with is usually indicated on the box or in the documentation on the wi-fi icon), then you can put bg mixed.

Channel width - data transmission channel width.

Max TX Rate - maximum speed transmission.

Enable Wireless Router Radio - enables and disables the wireless module on the router (i.e. enables and disables wi-fi)

Enable SSID Broadcast - allows you to enable or disable the visibility of a wi-fi network, if this option is disabled, then you can connect to a wi-fi network only by knowing its identifier (SSID), in the usual search for wi-fi this network will not be located.

Enable WDS - this option is needed to expand coverage already existing wi-fi networks.

Don't forget to click the Save button after finishing the configuration.

5. Set up security WiFi networks
To configure network security settings, go to the Wireless section and the Wireless Security subsection.

Here you can set the encryption method and password. I recommend choosing the WPA2-PSK encryption method. You can leave the encryption type as Automatic. The most important thing is to come up with a more difficult password (containing letters and numbers), 10-15 characters long. You still have to enter it only once on each new device, and for those who want to guess the password to your network, complex password will become a more significant obstacle than a simple one. (For example, put something like ERG345tr4R).

After having set up wifi password networks - do not forget to click on Save

6. Set up a local network (if necessary)
To configure a local network on a TP-LINK router, go to the Network section and the LAN subsection. Here you can set the IP address of the router. From the same range of IP addresses, the router will distribute addresses to devices connected to it. In this section, you can not change anything at all.

7. Administrator password setting
And finally, to ensure complete security- change the administrator password on the router (agree the password admin - does not look reliable). This password is used to log into the router's admin panel.

To do this, go to the System Tools section, the Password subsection. Enter the old login (admin) and password (admin), and below enter the new name (you can leave it the same) and password (but be sure to change it).

8. Reboot the router
You have probably already noticed that when you click on the Save button, the following inscription appears below:

This inscription says that in order to make changes, you need to restart the router. Click on the words click here and in the window that appears, click the reboot button. The router will reboot with the new settings.

9. Connect and work
Well, the router setup is completed. Now you need to connect a cable to it through which the provider provides Internet access. (To the blue port on the router). Up to 4 PCs or laptops can be connected to the yellow ports.

10. Purpose of the router indicators
And finally, consider what the indicators on the top panel of the router show.

First indicator. - Power (power indicator) - shows whether the router is turned on or off.

The second indicator - System (system indicator) - blinks in the normal state, if it just lights up - the route is initializing or an error has occurred, if it does not light up, then a system error has occurred.

The third indicator shows the status of the Wi-Fi network. Blinks when wi-fi is on and off when it's off.

LEDs 4 to 7 - show the status of the LAN connection. On - the cable is connected, but there is no network activity, Blinking - data is being exchanged between the router and the PC, Off - there is no connection.

The eighth indicator - Internet - shows whether the connection to the Internet is active. On - Internet is connected, Blinking - connection or data exchange is in progress, Off - Internet cable is not connected.

The last indicator shows the status of the QSS (Quick secure setting). This function is used to quickly connect devices to the router. It is mainly used to connect TP-LINK cards to a wi-fi router.

1. By default, login is admin, password is admin.
2. Couriers-configurers must change the password in the settings to the Serial number indicated on the box (S/N). When reconfiguring, it is also recommended to use it as a password for the router and wi-fi S / N ( serial number).
3. Resetting the router settings is done by pressing and holding reset buttons on the back of the router for 10 seconds.

In order to get into the web interface of the router, you need to open your Internet browser and type in the address bar http://192.168.1.1 , User Name admin, Password- admin(provided that the router has factory settings and its IP has not changed).

Change the factory password.

For security reasons, it is recommended to change the factory password.
Default: Login admin, password admin.
In the interface of the router, you need to go to the tab System Tools and choose Password.
In field Old User Name enter admin, old password enter admin.
Into the fields New User Name, New Password, Confirm New Password enter a new login (you can leave the old "admin"), as well as a new password and repeat it, respectively.

Then press the button Save.

SettingWiFion the router.

In the router interface, select the tab on the left " Wireless ”, in the list that opens, select “ Wireless Serrings».

We set the parameters as follows:

1. Field " SSID': Enter the name of the wireless network.
2. Region: Russia
3. Chanel: Auto
4.Mode: 11bgn mixed
5. Channel Width: Automatic
6. Max Tx Rate: 300Mbps
7. Click the button below " Save»

On the left menu, select " Wireless", Further " Wireless Security"and set the parameters:

1. Set point to WPA-PSK/WPA2-PSK
2. Version: WPA2-PSK
3. Encryption: Automatic
4. PSK Password: you must enter any set of numbers, from 8 to 63 in length. They also need to be remembered so that you can specify them when connecting to the network. It is recommended to use the serial number of the device as a key (indicated on the box, in the form S/N########).
5. Click the button below " Save»

Internet connection setup.

SettingPPPoEconnections.

1. On the left, select the menu network, Further MAC Clone
2. Click Clone MAC address, Further Save (for details see In chapter MAC Cloning addresses»)
3. Next, select on the left WAN
4.WAN connection type: PPPoE
5.Username: Your login from the contract
6.Password:your password from the agreement
7. Set the point to Connect Automatically
8. Press the button " Save».

Setting up PPtP (VPN) when automatically obtaining a local IP address (DHCP).

1. On the left, select the menu network, Further MAC Clone
2. Click Clone MAC address, Further Save (for details see In chapter MAC Cloning addresses»)
3. Next, select on the left WAN
4.WAN connection type: PPTP
5.username: Your login from the contract
6.Password: Your contract password
7.Server IP Address/Name: ppp.lan
8. Set the point to Connect Automatically
9. Save the settings with the button " Save»

Setting up PPtP (VPN) with a static local IP address.

1.WAN connection type: PPTP
2.username: Your login from the contract
3.Password: Your contract password
4. Set the point to static IP
5.Server IP Address/Name: ppp.lan
6.IP address: We drive in your IP address according to the contract
7.subnet mask: We drive in a mask according to the contract
8.gateway: We drive in the gateway under the contract
9.DNS: 212.1.224.6
10. Set the point to Connect Automatically
11. Save the settings with the button « Save».

NAT when automatically obtaining an IP address (DHCP).

1. On the left, select the menu network, Further MAC Clone
2. Click Clone MAC address, Further Save (for details see In chapter MAC Cloning addresses»)
3. Next, select on the left WAN
4.WAN connection type: Dynamic IP
5. Save the settings with the button « Save».

MAC address cloning (required when setting upPPPoE, PPTPwith dynamic settings andDHCP)

Saving/restoring router settings.

menu Backup & Restore.

To save the current settings of the router, press the button Backup. The settings file will be saved to the specified location on the hard drive.

To restore settings from a file, you must click the file selection button, specify the path to the settings file, then click the button restore.



Loading...
Top