Galaxy note 2 w3bsit3-dns.com firmware. If you need root access on the original firmware

Advanced → Wipe dalvik cache

Wipe data/factory reset

Wipe cache partion

Mounts & storage → format /system

  • It is desirable to flash from a laptop (or from a PC running via UPS) in order to avoid power outages during the firmware.

If you want to get root rights after you have asked new firmware, here is a video tutorial with detailed step by step instructions.

Warning: Use these instructions at your own risk. We will not be held responsible for anything that happens to you or your device that results from using the information in this guide.

What you need to have for firmware Samsung Galaxy Note 2 GT-N7100

1. Create a folder on the disk with numbers or English letters for the necessary files (example: C: 7100)

2. Download there everything you need for the firmware using the links below (it is recommended to download the latest versions):

Step-by-step instructions for firmware Samsung Galaxy Note 2 N7100:

  1. If you have an antivirus - disable

    2. Programs:

    Install SAMSUNG USB Driver for Mobile Phones

    Unzip Odin3_v3.09

4. Firmware

  • Run Odin3 v3.09, it will be in the Odin3_v3.09 folder
  • Click on the PDA field and find the firmware file that you unpacked into the C: 7100 folder
  • Connect your smartphone original cable to a PC, the first ID:COM field will turn blue.
  • We double-check everything and press "Start".
  • Wait for the end of the firmware process for 7-10 minutes, after which the smartphone will reboot itself.
  • Disconnect your phone from the computer while it reboots.

If you did it right, after the reboot you will have a boot animation and the device itself will boot from official firmware Android 4.x.

So far phablet Galaxy Note 2 is one of the most interesting smartphones in its niche, and many are unlikely even with the advent of the Galaxy Note 4 to decide on a change. However, technology has gone very far in these two years, and updates from manufacturers are unlikely to appear at all, and hopes for getting new features are associated only with custom firmware.

Here Galaxy Note 2 just received a custom firmware assembly called Ditto Note 4 (DN4). This will allow you to get a real Note 4 from Galaxy Note 2 after installing the firmware. Of course, all this only applies to changes in the interface and functions.

If you dare to install Ditto Note 4 on Note 2, then almost all the branded features of the new flagship will become available - this also applies to the energy-saving mode, the new panel quick access, updated Air Commands interface and more. The DN4 firmware itself runs on Android 4.4.4 KitKat, and its installation is quite standard - download zip file and install using custom recovery, or using Odin.

By the way, you can download the DN4 firmware file for Galaxy Note 4 here: download .

Before starting the installation, you should prepare and follow the following instructions:

  • Check the model number of your smartphone as the instruction is only for Note II (GT-N7100): Settings/About phone.
    If you have a smartphone of a different model, then the instruction is categorically not suitable, and if you try to update your smartphone with a different firmware, you can make it a “brick”.
  • Galaxy Note 2 must be rooted with custom TWRP or CWM recovery.
  • You will need to do backup system and then do a Factory Reset - in no case do not skip these steps.
  • You will need a Nandroid backup in case you want to roll back to previous version OSes, that is, when the flashing process fails.
  • Factory Reset will result in complete erasure your data, but if it is important for you to save all SMS messages, installed applications and photos.
  • Sync with Gmail so you don't lose your contacts.
  • Be sure to carefully read each step of the instructions, do not skip the steps to do the flashing the first time.
  • You are responsible for all actions and in case of failure we are not responsible.
  • Check battery charge. Recharge the phablet to at least 50, and preferably up to 80%.

Now that you know all of the above, you can proceed to the practical part of the article and successfully install Android 4.4.4 DN4 on Note 2.

Installing Android 4.4.4 DN4 on Note 2:

  • 1. Download Android 4.4.4 DN4 from this link: download .
  • 2. Connect your Galaxy Note 2 to your computer with via USB cable and copy the firmware file to the smartphone memory. Do not unpack the archive under any circumstances! Do not turn off your smartphone while copying!
  • 3. Now disconnect your smartphone from PC and turn off Note 2.
  • 4. Boot Galaxy Note 2 in recovery mode: Home + Power + Volume up button.
  • 5. First, make a backup of the system (Nandroid Backup): in CWM, select "backup and restore", specify the name of the backup file and confirm the choice; in TWRP, click on "Backup" and confirm your choice.
  • 6. Now you need to do a Factory Reset: in CWM, select "wipe data / factory reset" and confirm; in TWRP select "Wipe" and confirm your choice.
  • 7. After that, you need to install our firmware: in CWM, select "install zip from sdcard" and "choose zip from sdcard"; in TWRP, click "Install".
  • 8. Specify the Android 4.4.4 DN4 zip file and confirm the installation.
  • 9. Reboot the phablet and boot it normally. The first boot will take a little longer, so wait for it to finish.
  • 10. You will need to enter your gmail account details in order to continue working with the Galaxy Note 2 N7100.

In this article, we will learn how to flash your phone step by step and painlessly. samsung galaxy n7000 Note 2. Follow step by step instructions and you shouldn't have any problems.

Before the beginning Samsung firmware Galaxy Note 2, we advise you to read the rules.

  1. The battery charge of the phone must be at least 50%.
  2. The process of flashing a smartphone must be taken seriously and strictly follow the instructions below.
  3. During the software update, do not touch the phone, do not disconnect it from the computer.
  4. Make a copy of all necessary information and phone book numbers from the phone.a
  5. Need to be done full reset machine settings. To do this, go to the settings along the following path: Settings - Backup and recovery - Data Reset.
  6. Remember that only you are responsible for any changes you make to your phone.

What do you need to upgrade

You will need the following list of files:

  • Odin3 PC application;
  • driver SAMSUNG USB Driver for Mobile Phones .

Instruction

  1. Install the Odin application and all the necessary drivers to connect your smartphone to your computer
  2. Set the device to Download mode. To do this, turn off the smartphone and simultaneously hold down the "power", "volume down", "home" buttons, after the warning message appears, press "volume up", a picture with a green robot will appear on the screen, which means that the Downloading mode is enabled
  3. Launch the Odin application on your computer. Click the PDA button and select the required driver folder as below

4. Connect your smartphone to your computer via USB cable. ID:COM field indicator should be blue

5. Press the Start button to start flashing

6. The phone will reboot during the update process.

Upon completion, a loading animation will appear on the screen, followed by the actual loading. Do not be alarmed if the phone takes longer to boot than usual, these are the consequences of the update.

There was a need for Galaxy update Note 2 N7100 to latest version Android, and the official developer of available options can not yet offer? Custom firmware will come to your aid. Next you can find Full description And step by step instructions about how you can update the operating system of your gadget to android versions 4.4.2 KitKat using Phoenix custom ROM.
Judging by the reviews, this update option is the most stable and reliable, unlike its counterparts. Compared to standard firmware official developers, Phoenix firmware has its advantages. This may seem surprising, but this version is faster while power consumption is somewhat reduced. That is, thanks to the installation of such an update, you get high system performance and maximum “survivability” of your device.

To prepare the device for the update, you should perform several mandatory procedures described below.
Start with opening full access to your gadget or, as they say, . This has its drawbacks, since the procedure is, in fact, invalid. As a result, the Note 2 warranty is automatically voided. You need to restore it by returning to the factory limits, as well as by installing the latest official version android firmware. After that, it is mandatory to unlock the loader (bootloader) and install custom recovery (or).

If the information stored on the phone is very important to you, then you need to make this data. Installing this firmware involves complete removal information, so you need to think about the need to save important contacts, favorite programs and other useful information.
In addition, you need to create something like a system restore point (called a Nandroid backup). If an unrecoverable error occurred during the installation process, or Phoenix just didn't live up to your expectations, thanks to this feature, you can return to the previous version of the software.
Before installation, prepare the USB cable and turn on the computer.
Be sure to disable all antivirus programs on your computer and device.
The installation process is quite long, so you need to properly charge the phone before starting the firmware.
. To do this, you need to enter the "menu", select the "settings" item, and click on the "developer options" line.
This firmware manual is only suitable for Galaxy smartphone Note 2 (Model N7100).

Installation latest update Android on Galaxy Note 2 N7100 using Phoenix Firmware ROM.
1. Download itself, put the archive on the PC desktop. We leave it packed!
2. Using a cable, connect the phone to the computer.
3. We send the archive to the smartphone's memory card.
4. Disconnect the cable from the computer.
5. Turn off Galaxy Note 2.
6. After that, you need to start the device in recovery mode.
7. Next, we erase absolutely all data on the phone and clean the cache memory ( wipe data factory reset and wipe cache partition). To erase Dalvik Cache, select the option advance, and after that wipe dalvick cache.
8. The next step is to directly install the firmware itself. In the main menu, you need to select the installation from the archive (item " install zip from SD card"), and then " choose zip from SD card". Open the update installation file and download it.
9. Upon completion of initialization, we return to the main menu of the device and reboot it ( reboot system now).

Instructions for installing the official single-file firmware on Samsung Galaxy Note 2 (GT-N7100, GT-N7105).

    Drivers and programs

Attention!

To install the official stock firmware on the Galaxy S3 and return the phone's status ("Settings" > "About device" > "Properties" > "Device status") to "Official" after switching from custom firmware and thereby return the ability to receive updates over the air, just follow the instructions provided.

Installation instructions

    Unzip the downloaded archive to a folder with Odin PC for convenience. The file in ".tar" or ".tar.md5" format must be left, but "SS_DL.dll" can be deleted.

    Perform a data reset on the device.
    To do this, go to the settings on the tab " Accounts » to the section « Archive and reset”, select the item “ Reset device” and press the button “ Delete everything". The phone will reboot.

    Run Odin PC as administrator.

    Put the device into download mode ( Download Mode).
    To do this, simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

    In this state, connect the smartphone to the computer. In Odin, the inscription " COM».

    Click on the button " AP» and select the TAR archive of the firmware.

    Items « Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition", if active - must be disabled.

    Click on the button " Start". The firmware installation process will begin.

    At the end of the operation, if everything went well, the message “All threads completed. (succeed 1 / failed 0)". The phone must be rebooted manually by holding down the power button until the screen turns off. The initial boot of the device may take up to 5 minutes.
    ATTENTION!
    If the device does not boot for a long time or a data reset has not been done, it must be performed from the recovery.
    To do this, simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading select " Wipe data/Factory reset", and then - " Reboot system now". If after these steps the device also freezes at boot, you need to reflash it again.



Loading...
Top