How to reset on Chinese Android. Recovery in Chinese (what to do and how to fix or translate?)

You bought a Chinese smartphone, and then suddenly there was a need to go to Recovery. Well, there’s nothing to do - turn off the smartphone, press Vol (-) + Power, and it will boot into recovery mode. And imagine your surprise when Recovery opens in Chinese. Didn't expect it? And they told you 10 years ago, learn Chinese! Didn't you listen? But in vain.
Well, oh well, I don’t know Chinese either, maybe just a few words, so let’s think about how to get out of the situation. There is a very simple option, which I will write about below.

The simplest option

Chinese smartphones from the basement, and not only others, often have two Recovery: in Chinese and English. I hope there are no problems with English. To get into the English version you need to hold down Vol(+)+Power, sometimes vice versa (you need to try two combinations). If there is a Home button, then you can use it. Chinese friends are great dreamers, and are able to hide recovery in the most inappropriate place.

Decoding recovery in Chinese

Okay, nothing worked out for you, since you are reading this point, then let’s deal with Chinese. We can do this, because when entering RuleSmart, each visitor is given a free energy elixir, which will be the envy of both Asterix and Obelix, because it gives intellectual strength at the level of the emperor of philosophy.
Before any manipulation with your own hands, you need to make a backup so that you can roll back later, ok?
Usually, people (and non-humans too) need to reset their settings via Recovery, but it is in Chinese. So we’ll figure out how to do this, using Pushkin’s work.

Instructions

Go to Recovery

We select an incomprehensible item in which MMC is written after the hieroglyphs.

You press the Power button and it resets. Now once again, we went into a reboot.

That's it, the settings are reset, you can use a “clean” smartphone.

We have already considered all the basic and theoretical questions about Hard Reset or resetting the gadget to factory settings. When and why it should be done, and what will happen after full reset. If you have not yet fully understood the whole meaning of this operation, we recommend that you go back to the beginning and read everything carefully. Perhaps the harm from the reset will be much more noticeable for you than the benefit gained. So let's get started!

Software Hard Reset

This type of reset is so severe and difficult to understand that only a real guru can master it. mobile technologies and... Baba Varya from the next door. Yes, of course, a software reset is only suitable if the operating system boots. But on the other hand, to perform it you don’t need any special knowledge, all you need to do is just tap the screen three times and your smartphone or tablet is pristine and free of all programs and toys that managed to clog its memory.
How to do a soft reset: “Settings” > “Backup and Reset” -> “Reset settings”.

Click to enlarge

Attention! All your data, contacts, SMS, programs and toys, photos and videos from the camera will be erased! This applies to camera files if you have not configured saving the pictures and videos you take to a memory card.

Hardware Reset

If the phone does not load the operating system, and hangs somewhere at the beginning, or does not show signs of life at all due to gross interference in its software part, you can try to do hard reset. On most gadgets this can be done fairly in a simple way. First you need to turn off the device.

Click to enlarge

Just turn it on by pressing the power button, and then depending on specific model, press simultaneously Power buttons, Vol- and Home or just the first two. You need to hold them for a long time until the system menu appears on the screen. It will be in English. But there is no need to be afraid. Use the volume rocker to scroll down to the item “Wipe data/Factory Reset" and select it, and then enjoy the process of recycling accumulated useless data that interferes with normal operation your phone or tablet.

Click to enlarge

Hard Reset in Chinese

However, a situation often arises when your thoroughly noble and European phone suddenly has a Chinese Hard Reset menu. Who's smarter already guessed how to do Hard Reset in Chinese. Well, for those who are still waiting for a hint, we will give you a hint. Look at the menu item with the slash. This is a “/” slash. Or just calculate by analogy in order from above.
If you still have difficulties, you can also look for the menu item containing the abbreviation eMMC or MMC at the end. This is what you are looking for item for hard reset of Chinese phone and a tablet. Look at the screenshots below.

Click to enlarge

Hard Reset via computer

In the most severe and advanced case, when the carcass could not be revived by any of the methods described above, we then use heavy artillery - Android Debug Bridge. It is a software developer tool for Android OS. But it will be useful to us primarily because it can send the necessary commands to a mobile gadget connected to a computer via USB. Full information for ADB and you can find it on the Internet. In this case, its use is limited to only one command.
We prepare the device. We take out the battery. Let's wait a little. Re-insert. We connect it with a cable to the computer. From the PC via the console we send the required reset command: adb reboot recovery. And we hope that everything will work out.
Lastly. Data from an SD card that you inserted into a special slot on your phone or tablet will not be erased. Don't be afraid.

Chinese smartphones are very popular in our country. This is facilitated by the low cost of the devices, as well as decent characteristics.

However, none Android smartphone is not immune from errors and various problems. If you decide to reset to factory settings (hard reset) on Chinese smartphone, but you don’t understand Chinese characters – we’ll tell you what to do and where to press. Thanks to screenshots, you can do a hard reset on a Chinese smartphone in a matter of seconds.

In this guide we will cover the following:

How to do a hard reset on Chinese Samsung Galaxy.
How to do a hard reset in Chinese HTC Desire.
How to do a hard reset on a Chinese Lenovo.
How to do a hard reset on a Chinese Android smartphone.

1. How to do a hard reset on a Chinese Samsung Galaxy

First, make sure you have extracted microSD card memory and SIM card. It is also recommended to charge your mobile device to at least 70%.

That's all! Reset to factory settings in Chinese Samsung Galaxy not so difficult, right?

2. How to do a hard reset on a Chinese HTC Desire

To perform a factory reset on your Chinese HTC Desire, you will also need to go into recovery mode.

3. How to do a hard reset on a Chinese Lenovo

Lenovo smartphones have a unique ability to change the language in recovery mode. After you select the desired language, you can do a hard reset and return your smartphone to factory settings.

If you are unable to select the language for recovery mode, then we have converted Chinese characters from recovery mode to English language.

You just have to wait for the hard reset process on the Chinese Lenovo to complete.

4. How to do a hard reset on a Chinese Android smartphone

You can use these methods for all Chinese Android smartphones.

Take a close look at the screenshots with Chinese characters. If one of them matches what you have on your smartphone, you can safely use it to reset to factory settings.

Smartphones running the Android operating system are prone to various glitches. Most often, users encounter freezes, and in the most difficult cases, devices become inoperable - for example, endless loading operating system. How to reboot your Android phone? There are several simple tools for this.

If we can't access the onscreen menus, we turn off the phone. If this procedure does not solve the problem, the next step is to switch to technical service. There comes a time when your smartphone slows down or you just want to transfer it. At this point, you know how to perform a factory reset or factory reset.

In these cases, rebooting your device can resolve many of these issues. However, if you have updated your operating system to a higher new version lately, don't be afraid, she won't come back. If you have something very important on your device, find a backup from different sources.

In our review we will consider the following reboot methods:

No data loss or application deletion;
Complete reboot, deleting data and applications.

The first will help with partial freezes or incorrect operation of the OS, and the second will restore Android functionality in case of fatal failures (if it is impossible to load).

There's no sadder sound in the world than someone blatant with a brand new device, but no photos of their last trip, or without that important work contact. In most cases, you can perform a factory reset from the device settings menu, which is the most simple method to complete the process.

Having trouble accessing the settings menu?

And voela, your device will reboot like new. There is also a way to do a factory reset and restore system settings your device, even if you can't access the settings menu. And it's not as difficult as it could be, just a few ninja button moves.

Have you found that your Android device is frozen and has stopped responding to your actions? This happens quite often. The reason for this is imperfect software, as well as many versions mobile devices– with some of them the operating system and applications do not work properly. Periodic freezes are quite normal, so there is no need to get upset.

Keep the button pressed and simultaneously press and release the Volume Up button; Again use the Volume Down button to navigate. Use the Power button to confirm your selection; Use the Volume Down button to select the Erase all user data option. Press the Power button to confirm; Wait a few minutes for the process to complete and select Reboot.

And once again, recover your data from account, which you copied.

How to reboot Android and get your phone back to working? The easiest way is to send the device to reboot. To do this, you need to hold down the power button and do not release it until the shutdown menu appears on the screen. Here you will find three points:

Turn off;
Offline mode;
Reboot.

Select the last option, confirm the reboot and wait for it to complete. In some cases, it may take up to 10 seconds or more before the above menu appears., depending on the severity of the “freeze”. If you suddenly change your mind about sending your smartphone to reboot, select the cancel option.

You can try the following button combination. As my grandmother used to say, “There is no use crying over spilled milk.” It is important to point out that hard reset will completely delete all your data, telephone numbers, photos, apps, videos, etc. your device will return to its original configuration as if it left the factory.

What is Wipe and when will you need it?

This tip, this one and this one. Use the buttons " High level Volume" and "Volume Low" to select the factory reset option, then confirm with the Power button. The reboot will begin. Wait and don't touch anything until the end, which may take time.

Sometimes the nature of the “freeze” is such that the device refuses to respond to pressing the power button. In this case, you need to release the button, press it again and hold it longer. If this does not help, remove the back cover and remove battery, wait a few seconds and install the battery back. We turn on the phone and wait for it to turn on completely - now you can use your device.

And when is it important to carry out such a process? It's worth noting that in laptops this process is known as a "hard reset" and that there are several situations in which formatting laptops might be recommended, which we'll talk about shortly. In this article, we will also explain how to perform a hard reset on the three operating systems already mentioned. But first of all, it is worth warning that everyone should stay in touch.

Unlike computers, hard formatting Reset on smartphones and tablets does not require users to have official operating system installation discs. This is because devices rely on the system stored in their domains, which makes our lives a lot easier, by the way.

Is your device behaving incorrectly, constantly freezing or slowing down? Often the problem is solved using memory cleaning applications - during the operation of the operating room Android systems A lot of junk accumulates on your phone. By cleaning out the garbage, we can restore the device to its former operating speed. If this does not help, you should resort to a full reboot, deleting all data.

This means that the process not only “wipe all data” but also “restore factory settings” from the device. That is, you can soon reuse your gadget the same way you used it when you purchased it - with performance improvements, bug fixes, etc.

Portable operating systems are constantly receiving data and changing. This means that there are many times when they can go through petty corruption that can cause big problems in the long run. One of the most common consequences is the slowness experienced by users or apps that run erroneously - mainly by those who frequently install many apps on devices.

How to completely reboot Android, whether you have a Samsung, Fly, LG or a smartphone from any other brand in your hands? To do this, go to “Settings – Backup and reset” and select “Reset data”. This operation will return the smartphone to its factory state.. It will also delete the data encryption file on the memory card - if you use encryption, you will not be able to access your data after a reboot.

If you go through this, it may be time to do a hard reset on your phone. In addition to restoring operating system references, you will also eliminate unnecessary traces and data that may be weighed down in the device's memory and processing. In this case, the result will be very noticeable in a device with smoother and smoother operation.

It's also important to do this kind of formatting whenever you change phones. After all, you don't want the new owner of the device to have access to your data, and you also don't want to leave a large number of personal files sliding around in a drawer - which could be found by anyone.

To avoid losing important data, regularly back up your devices and use cloud services that store data on external servers.

Is your smartphone so stuck that it can't start? In this case, you should return it to factory settings via Recovery Mode. To do this, you need to turn off the smartphone, then press the power key and the “Volume down” key - after turning it on, you will be taken to a special service menu. Here you need to select “Wipe Data/Factory Reset” and wait until the phone is reset to factory settings.

Don't forget: make a backup first

Since we are talking about formatting the device, it is very important to remember that all files will be deleted. Therefore, it is recommended to archive the data on a computer or other drive that can be easily accessed for next time. You can also perform this type of action in specialized cloud services- in some cases this is the best option.

With it, you can quickly save your files, photos, data, contacts and application settings. As we'll explain here, it has many options to allow you to save data quickly and securely. Performing hard reset processes is very easy on any operating system - much easier than accidentally restoring data, so never skip a backup step. See how to format your devices with the three major portable operating systems.

Many other keyboard shortcuts can be used to access Recovery Mode. For example, the power button and the “Home” button, the power button and both volume buttons, sequential pressing of buttons, etc. upon entering Recovery Mode for your smartphone should be searched on specialized forums.

If your Android-based smartphone begins to glitch and freeze, do not rush to take it to the service center or perform warranty repairs. Maybe this problem can be solved by simply resetting the settings ( hard reset). In this case, all system settings will be restored to factory settings, and all contacts will be deleted, installed applications, messages, etc.

If you are going to do formatting directly through the operating system, all you need to do is follow a few steps on your device. Enter the settings window and then search for “Backup & reset”. After that, click “Restore factory data” and confirm the action. In a few minutes the process will begin and soon you will have your smartphone with everything reset.

When the device is turned off, hold down the Volume Down button along with the Power button for about ten seconds. After a few minutes, the entire hard reset will happen and you will have your smartphone working again. This means that it is generally not possible to back up stored information. Just go to the settings window and then to the General tab. In it, you should navigate until you reach "Reset" and then select "Erase all content and settings."

What is a hard reset and why is it needed?

A complete reset of Android settings to factory defaults is called a hard reset. It is recommended to do this if the smartphone does not work stably (it often freezes, glitches, etc.). You can do it in three in various ways, each of which will now be considered. Before starting a hard reset, do not forget to back up all your data.

Everything will be resolved within a few minutes. After that, simply select the device in the application and order recovery. All you have to do is go to Settings and then select the Turn on phone option. The Reset Phone button will then appear.

By clicking this option and confirming the action, all data will be deleted quickly. As you have seen, portable formatting can be very useful for various cases, and luckily it's very easy for everyone. Now that you know all the steps in this process, back up and restore your device with better performance and quality. Have you already done something on your smartphone?

You can make a complete copy of all smartphone data using the program.

Android software reset method

Is to use standard function, which is in the settings of any Android system. To use it, you need to go to “Settings”, then select “Backup and reset” and click “Reset settings”. After this, a warning will be displayed about deleting all existing data, and at the bottom there will be a confirmation button “Reset phone settings”.

Everyone has that smart friend who sets up a blocking pattern that can't be replicated - yes, the ones that resemble the name of some black metal band or a magic doodle. The worst thing is that you are a smart friend, because the possibility of our brain simply forgetting the drawing is high. Nobody likes to have their smartphone stuck forever, right?

So, how to solve this issue. Obviously, before designing very complex circuit When blocking, always think about something relatively easy to remember. If your phone crashed on the home screen and you can no longer access your apps, follow these steps.

You need to confirm the selected action by clicking the “Erase everything” button.
In some, old Android versions Below version 2.1, finding the factory reset may be slightly different. It could be found in the "Privacy" - "Data Reset" section.

Virtually “turn off” your cell phone. Replace the battery and turn on the smartphone by pressing two buttons at the same time. This will put your device into recovery mode - keep pressing until the power turns on. A menu will appear and you must select an option - use the volume buttons to select one; Press the Power button to confirm.

That is, all your data and contacts that are not synced with some accounts will be lost. However, despair requires radical action. Many have already done this, but they don't know by name. All two are connected to factory reset or factory reset in Portuguese. Specifically, when we talk about thermal hard reset and soft reset, we are talking about returning the device system to its original state. That is, both serve to return your mobile phone or other device to factory settings.

Method without applying settings, using code

To do this, dial *2767*3855# in the number entry menu. This will lead to an immediate, complete restoration of the smartphone’s settings without any additional confirmation from the user.

Resetting Android settings when the smartphone does not respond

Sometimes there are cases when the gadget does not respond to any commands. In this case, you may need the third reset method. When you turn on Android, simultaneously hold down three buttons: “Power”, “Home” and “Volume Down”. This combination should be held until the “ ” mode appears. In it, select the “Wipe” section (which means a complete reset) and confirm your choice by pressing the “Home” button.

But there are differences in security and access to these two options, each of which is recommended for your specific case. Learn the difference between a hard reset and a soft reset. This option is usually accessible via a pair of pressing a secret key sequence. This process aims to completely restore the device's operating system to eliminate any error from the root. This method erases everything installed on the phone, restoring the system to the same factory default settings.

In this case, the operating system is completely reinstalled on your cell phone through a few steps, which usually involves pressing a secret key sequence to enter recovery mode on the device, i.e. recovery mode. When persistent errors appear on your phone, tablet or other device. When it doesn't turn on completely or gets stuck on start screen, usually with the manufacturer's logo.

When the system is infected with viruses.
Slow or slow.
Introducing errors such as applications that close on their own.

This is a way to make your phone, tablet, or other device default to a simpler and faster way, but it's not always as effective as a hard reset.

After a hard reset, you may be tempted to restore Android from backup copy. However, this should be done with great caution - after all, perhaps the problem that caused the problem lay in previous settings or in one of the installed applications. Therefore, it is better not to take risks, but to set up your smartphone as new by entering your Google account information. After this contacts, postal letters etc. will be synchronized with your smartphone. You can install the necessary applications yourself from PlayMarketa.

Fans of alternative firmware for Android should remember that a full reset does not affect areas that store installed additional firmware. This means that any mods and changes to the operating system software will not be deleted from the phone's memory. A similar fact should be taken into account if a complete restoration is performed, for example, in order to return the gadget under warranty.

In addition, a full reset does not affect the contents of the memory card. You will have to delete the information from it yourself. However, remember that any deletion with the “Delete” command is easily reversible, and if there is confidential data, it is better to take additional care of the card.

4 ways to reset graphic key, get rid of glitches and brakes on Chinese phones on MTK. 3 ways to Hard Reset using the Lenovo A808 as an example. 1 way: Menu-Settings-Reset. Method 2: Press the volume UP button and the POWER button together, hold them simultaneously until the display lights up, release the power button, and continue to hold the + button, the robot lights up, press the power button (in some cases the up button, in some minus, in some simultaneously + and power button), and get into recovery, select the line Wipe data\Factory reset, confirm with the power button (sometimes with the up button), go down to the YES line, and confirm with the power button (sometimes with the up button), wait for the end, and select the Reboot line with the power button . Method 3: Press the volume DOWN button and the POWER button together, hold them simultaneously until the display lights up, release the power button and continue to hold the button, after a few seconds the test menu will appear in Chinese, we are interested in the line with the only English word eMMC, point the down button at it and select the power button, wait for it to finish, if it returns to the previous menu, remove the battery, insert it and try to turn it on. 4 way- this is firmware, but firmware is individually selected for a specific device, it is difficult to do this on your own. ATTENTION Remember, if you have Android 5.1, 6, 7 and higher, before resetting the settings, you must exit Google accounts, Samsung Account, Mi Account, Flyme, and others, if this is not done, after the reset the corresponding lock will work, which is EXTREMELY HARD to remove, and sometimes even impossible. If the solution from the video did not help you, try one of the following combinations: 1. + and food. 2. - and power 3. Press power for 2-3 seconds and then press minus 4. Press power for 2-3 seconds and then press + 5. 3 keys simultaneously Plus Minus and power. All combinations: as soon as the backlight lights up or the vibration is triggered, release the power and hold the remaining keys until recovery or something similar turns on. AND MOST IMPORTANTLY, REMEMBER THAT EVERYTHING YOU DO IS DONE AT YOUR OWN RESPONSIBILITY AND IF YOU HAVE ANY DOUBT, I STRONGLY RECOMMEND CONTACTING A PROFESSIONAL

Date: 2018-09-21 Tyzhprogrammer

Rating: 4.0 out of 5
Votes: 1

We have already considered all the basic and theoretical questions about Hard Reset or resetting the gadget to factory settings. When and why it needs to be done, and what will happen after a complete reset. If you have not yet fully understood the whole meaning of this operation, we recommend that you go back to the beginning and read everything carefully. Perhaps the harm from the reset will be much more noticeable for you than the benefit gained. So let's get started!

Software Hard Reset

This type of reset is so severe and difficult to understand that only a real guru of mobile technologies and... Baba Varya from the next door can master it. Yes, of course, a software reset is only suitable if the operating system boots. But on the other hand, to perform it you don’t need any special knowledge, all you need to do is just tap the screen three times and your smartphone or tablet is pristine and free of all programs and toys that managed to clog its memory.
How to do a soft reset: “Settings” > “Backup and Reset” -> “Reset settings”.

Click to enlarge

Hardware Reset

If the phone does not load the operating system, and hangs somewhere at the beginning, or does not show signs of life at all due to gross interference in its software, you can try to do a hard reset. On most gadgets this can be done in a fairly simple way. First you need to turn off the device.

Click to enlarge

Just turn it on by pressing the power button, and then, depending on the specific model, simultaneously press the Power, Vol- and Home buttons or only the first two. You need to hold them for a long time until the system menu appears on the screen. It will be in English. But there is no need to be afraid. Use the volume rocker to scroll down to the item “Wipe data/Factory Reset" and select it, and then enjoy the process of recycling accumulated useless data that interferes with the normal operation of your phone or tablet.

Click to enlarge

Hard Reset in Chinese

Click to enlarge

Hard Reset via computer

In the most severe and advanced case, when the carcass could not be revived by any of the methods described above, we then use heavy artillery - Android Debug Bridge. It is a software developer tool for Android OS. But it will be useful to us primarily because it can send the necessary commands to a mobile gadget connected to a computer via USB. You can find complete information on ADB and it itself on the Internet. In this case, its use is limited to only one command.
We prepare the device. We take out the battery. Let's wait a little. Re-insert. We connect it with a cable to the computer. From the PC via the console we send the required reset command: adb reboot recovery. And we hope that everything will work out.
Lastly. Data from an SD card that you inserted into a special slot on your phone or tablet will not be erased. Don't be afraid.

Hard Reset, also known as Hard Reset, is done in two main ways. Regardless of the method you choose, take care backup personal information, and also remove the memory card from the tablet and, just in case, a SIM card, if any.

1. Using the menu (if the tablet turns on)

If the tablet is fully operational, the pattern key is not locked, and you have the opportunity to get into the settings, be sure to use this method to do a Hard Reset (hard reset) and reset the user settings to factory settings.

1. All you need to do is go to the settings and find the item Recovery and reset.

2. Then you need to select the item Reset settings.

4. As a result, Android will issue a final warning that you want to destroy everything and will not be able to restore anything. If you haven't changed your mind, choose a team Erase everything.

5. The tablet will reboot, and to show you the full depth of the process, you will see a screensaver of atoms and molecules spinning in the belly of the Android robot.

6. This is normal, after a couple of minutes the screensaver will disappear, the tablet will start with factory settings and applications, as if you had just brought it from the store.

2. Through the Recovery menu (if the tablet does not turn on)

If there is a problem on the tablet software glitch, it has stopped starting, there is an “eternal loading”, or the device is locked with a graphic key - you have only one way out - to get into Recovery mode, i.e. recovery mode. The Recovery menu can only be accessed when the tablet is turned off. To do this, use a special combination of simultaneously or sequentially pressed physical buttons on the tablet, which are located on the device body. Typically this is the volume rocker +/-, the power button, and/or the Home key. The general procedure is as follows:

1. Turn off the tablet. The battery must be fully charged. If you are not sure that the battery is fully charged, or the battery is weak, it is better to carry out all manipulations by connecting the tablet to the network

2. Press and hold the key combination (examples of such combinations for your device model will be below), and wait until the Recovery mode opens

3. Navigate through the menu using the volume rocker (touch control is possible in some tablets). Choosing a team wipe data/factory reset(translation: erase base/reset settings to factory settings). To do this, you need to press with your finger if the control is touch-sensitive, or with the power key, which in this case serves as a button OK.

5. After this, you must give the reboot command. To do this, select the item reboot system now(translation: reboot the system now)

6. The tablet will think for a while, all data and settings will be erased, and it will turn on itself.

It is worth noting that each tablet manufacturer sets its own set of keys to access the Recovery menu, so only general methods that are relevant for different brands of devices have been collected.

Attention! In the descriptions of options for how to get into Recovery, I will mention that the reset is carried out according to the standard, general procedure, or according to the workpiece. This means that you will need to use the blank with the photo described above.

How to do a Hard Reset on tablets from different manufacturers:

1) Samsung

Method No. 1

At the same time, press the buttons: “Home” - the central button, the volume key “+”, and the power key.
We wait a couple of seconds for the Samsung logo to appear, then we wait for Recovery mode to start.
Release the previously held keys.
Using the volume +/- keys, go to the wipe datafactory reset line. To select an item, briefly press the power key. Next we do everything according to the preparation.

Method number 2, if there is no Home button, or when the key combination does not work

Press and hold two keys: volume down “-” and power
As soon as you see the Samsung logo, you can release the Power key. At the same time, hold the volume button. When a recumbent Android appears with an exclamation mark, you can release the button
We do a Hard Reset (hard reset) according to the standard procedure

2) Asus

Method No. 1

Press and hold the power and volume down buttons at the same time
Release the keys when the recovery menu appears
In the menu, look for the Factory Reset line, select it using the power button. We are waiting for the operation to complete and the tablet to reboot.

Method No. 2

Press and hold the power key and volume down rocker at the same time
Wait until small text appears at the top of the screen, then release the keys
As soon as you see the words Wipe Data, immediately press the volume key once (the main thing is to do this without delay). We are waiting for a reboot and using it.

3) Lenovo

Method No. 1

It is necessary to simultaneously hold down two more keys - volume control (i.e. press the rocker in the middle) and hold for several seconds
Then simply release these buttons and make a single press on the volume down or up rocker
We look for the Wipe data/Factory reset item, select it with the power key, and wait until the reset process is completed.

Method No. 2

Press the Power key until you feel a slight vibration
Immediately after this, you need to quickly press the volume up key several times (it may not work the first time)
The Recovery menu will appear, then we reset according to the standard procedure

Method No. 3

Press and hold the volume and power keys at the same time
We release only when the Lenovo logo appears
When you wait for the recovery menu to load, follow the standard procedure according to the template

4) Prestigio

Method #1 (works in most cases)

Press the volume rocker up and the power button at the same time
Release when the Android logo appears
After recovery appears, perform a standard reset

Method No. 2

Press and hold the volume down rocker together with the power key.
Wait until the tablet starts up, after which you can release the power button, do not release the volume rocker
When the recumbent Android appears, release the key and immediately press the volume rocker all the way. (That is, decreasing and increasing the volume at the same time). If nothing happens, repeat the procedure again until it works
If you're lucky, you'll get to the Recovery menu, and then everything is as usual

5) Texet

Method No. 1

The volume up rocker “+” must be pressed simultaneously with the power button
When the tablet responds with vibration, you can release the power rocker and continue to hold the volume button
As soon as the menu appears, you can release the button
Further according to the standard

Method No. 2

Press and hold the Home key at the same time as the Power button
When the Android logo appears, release the Power key and press it for a couple more seconds. Then press the volume key
Next, we reset according to the template

Method No. 3

Press and hold the Home and Power/Lock buttons at the same time. Release “Power” after a couple of seconds, while continuing to hold the “Home” key
When you see the Recovery menu, you can release the button and perform a reset according to the standard template.

6) Sony

Method No. 1

The power and volume up keys must be pressed simultaneously
As soon as the screen turns on, release the power button while simultaneously holding down the entire volume key
After the menu appears, the button can be released, and then the standard procedure

Method No. 2 (for tablets with Reset button)

Connect your tablet via charger to the network, and wait until the green power indicator, which is located near the device’s power button, lights up
On the case we find a hole with a Reset button, and press it with a thin object, such as a paper clip
When the screen is turned off, press and hold “Power” for a couple of seconds
Before the tablet starts to turn on, press the volume up button several times in a row
When the recovery menu appears, do a factory reset

7) Huawei

Method No. 1

Press and hold the Power and Down buttons at the same time for about 10 seconds until the menu appears
We reset the workpiece

Method No. 2

Press the volume button in the middle, followed by the power button. At the same time, do not release the volume rocker
Hold for up to 10 seconds until the Android screensaver appears. At this time, you need to release the power key, but the volume button must remain pressed
As soon as the image of the Android robot with gears appears, move your finger press from the center of the volume rocker to increase it
Release the button only when the green loading bar appears
Next, all you need to do is observe the process. When everything is demolished and the hard reset is performed, the tablet will restart.

8) Ainol

Press and hold two buttons at the same time: power and volume rocker
You will see a green robot on the display - the buttons can be released
After this, the Recovery menu should appear. If a miracle does not happen, press the power button once, or “Home”
Further everything is according to the standard.

9) On Chinese tablets (including noname)

There are so many Chinese-made tablets that it is simply impossible to describe all the options for getting into the recovery menu. Try to try all the methods described above on your tablet - one will do anyway.

Also note that most Chinese devices simply do not have Recovery mode. All you can do in this case is to find the firmware for your tablet or a program for it, as well as instructions for it, and. Fill your tablet with pure Android and it will work again.

How to do a Hard Reset on a tablet without volume keys

There are devices that nature has deprived of a volume rocker. General advice in this situation:

At random, try to get into recovery mode by holding down “Power” and “Home” with the tablet turned off. For example, hold down two buttons at the same time and wait. Or this: hold down the “Home” button. At the same time, press (but do not hold) the power button once, then release the “Home” key. When the Android splash screen appears, press the “Home” button again.
Even if you manage to get into Recovery, there is a problem with navigating the menu. Is being decided USB connection keyboard via OTG cable.
If you still can’t get into recovery mode, the most clumsy option is to reflash the tablet.

Please note that this article is not exhaustive information on all tablet models. Therefore, if you do not find the manufacturer of your tablet in the list, try all the keyboard shortcuts described above, perhaps some method will be suitable for your device. If you still haven’t managed to get into Recovery mode, write the model of your tablet in the comments, and we’ll try to help if possible.

Recovery is a software recovery mode built into the operating system of the device (tablet, smartphone, desktop computer). Using the program allows you to reset settings, copy information, and eliminate operational errors.

Recovery in Chinese

Devices made in China are equipped with a system menu in the manufacturer's language. For ease of use, you need to compare the points recovery menu in Chinese with standard items identical in content and set of functions.

To call the recovery menu you need to:

Power off the device
Press and hold the power and volume up keys at the same time
Holding the buttons will turn on the device and display the required mode

IMPORTANT. Before using this mode, it is recommended to copy all information to another device to avoid data loss. Incorrect actions in the system menu can cause a complete loss of all information stored in the memory of a Chinese smartphone.

The user can move up and down through the settings using the volume buttons; to select a specific action, use the home button.

The main sections of the recovery system menu in Chinese correspond to the standard translation:

Auto Test – checking the basic parameters of the operating system and testing it for errors
Wipe eMMC – hard reset of all parameters and settings of the smartphone without the possibility of recovery
Reboot - reboot
Version info – help
Mounts with Storage – gadget memory management, information about the amount of free space or formatting
Wipe Cache Partition - clearing the cache
Wipe Cache Partition – copying all existing information
Factory Reset - restoring factory settings

To exit the settings, just press the power off button.

IMPORTANT. It is prohibited to terminate the download process before it is complete. This may cause a system failure and damage to the Chinese phone.

To restore the device to factory settings, perform a hard reset. This item can be accomplished in two ways - in the menu and, for cases when the smartphone does not turn on, using a key combination.

Hard reset on a Chinese phone in the menu is convenient to use only if the items are configured in Russian:

Select "Settings"
Activate "Backup and Reset"
Additionally, click on “Reset settings”

For those cases when the device does not turn on or the Russified menu is not available, a hard reset on a Chinese phone is performed through rakveri or by pressing the “Power” + “Home” + “Volume Down” buttons, then select wipe.

IMPORTANT. Before performing a hard reset, you must fully charge the smartphone battery (the recovery process will be interrupted if the charge is low).

Performing a hard reset will delete all the user’s personal data from the gadget’s memory.

Resetting the settings on a Chinese device Wipe data factory reset allows the user to clear the cache, remove installed applications and errors caused by their operation, while saving media files - music, photos, images.

Call up the recovery menu on Android OS in Xiaomi device you can follow the standard sequence of actions. Turn off your smartphone, then simultaneously hold down the volume up, home and power buttons. The volume up/down buttons are used to move through items, the power key is used to select or activate one of the actions. In this mode, it is possible not only to return to factory settings or restore functionality, but also to update system folders TWRP, CWM.

On Android, in the recovery system menu you can not only reset, but also test the phone’s operation in the Factory mode item. It is represented by several subparagraphs, deciphering their meaning in Russian:

Full Test – all phone parameters are checked
Item Test – custom scan
Signaling Test – SIM card and signal level test
GPS – diagnostics of the correct operation of the location system

After completing all checks, just click on rebut to exit the system menu.

How to reset settings on Android

In order to reset settings on Android you need to activate the system recovery mode and select Hard reset. To do a hard reset on a Chinese device, you must first copy all important information to another device. Decoding of all recovery points is standard for most models - Lenovo, Samsung, Xiaomi.

Recovery allows the user to roll back the Android operating system to the factory version and clear all available memory of the smartphone. Using the Wipe data factory reset item, it is possible to save media files after resetting. System functions make it possible to restore the operation of the smartphone, remove unnecessary applications that cause crashes and errors. On Chinese phones, items are described in the manufacturer's language or in English. To decipher the points, you must follow the instructions, which are the same for most Lenovo (Lenovo) and Xiaomi models; for this reason, translation is not required.

4 ways to reset the pattern lock, get rid of glitches and slowdowns on Chinese phones on MTK. 3 ways to Hard Reset using the Lenovo A808 as an example. 1 way: Menu-Settings-Reset. Method 2: Press the volume UP button and the POWER button together, hold them simultaneously until the display lights up, release the power button, and continue to hold the + button, the robot lights up, press the power button (in some cases the up button, in some minus, in some simultaneously + and power button), and get into recovery, select the line Wipe data\Factory reset, confirm with the power button (sometimes with the up button), go down to the YES line, and confirm with the power button (sometimes with the up button), wait for the end, and select the Reboot line with the power button . Method 3: Press the volume DOWN button and the POWER button together, hold them simultaneously until the display lights up, release the power button and continue to hold the button, after a few seconds the test menu will appear in Chinese, we are interested in the line with the only English word eMMC, point the down button at it and select the power button, wait for it to finish, if it returns to the previous menu, remove the battery, insert it and try to turn it on. 4 way- this is firmware, but firmware is individually selected for a specific device, it is difficult to do this on your own. ATTENTION Remember, if you have Android 5.1, 6, 7 and higher, before resetting the settings, be sure to log out of your Google, Samsung Account, Mi Account, Flyme, and others, if you do not do this, the corresponding lock will work after the reset, which is EXTREMELY HARD to remove, and sometimes even impossible. If the solution from the video did not help you, try one of the following combinations: 1. + and food. 2. - and power 3. Press power for 2-3 seconds and then press minus 4. Press power for 2-3 seconds and then press + 5. 3 keys simultaneously Plus Minus and power. All combinations: as soon as the backlight lights up or the vibration is triggered, release the power and hold the remaining keys until recovery or something similar turns on. AND MOST IMPORTANTLY, REMEMBER THAT EVERYTHING YOU DO IS DONE AT YOUR OWN RESPONSIBILITY AND IF YOU HAVE ANY DOUBT, I STRONGLY RECOMMEND CONTACTING A PROFESSIONAL

Date: 2018-09-21 Tyzhprogrammer

Rating: 2.6 out of 5
Votes: 3

Comments and reviews: 30

1. Alexander
Help please. My world space phone 5g turned into a brick.
I forgot my password. I reset it with a hard reset. I deleted the settings via keyboard options. I launched it and was delighted. I started downloading programs again. The settings suggested updating the software. Updated. Restart and a picture with a lying android. There is no team.
Now the recovery menu is called up, but the factor reset is useless. I run it, but the reboot again gives the android and the message No Command. I've already reset it 50 times, but nothing has reset.
I launched the scanning option in the recovery menu, it says about modified files. Apparently from a software update, but a reset does not remove them. There is no reset to factory settings.
Now the recovery menu in Chinese cannot be called up. Previously, English was called volume+, and Chinese was called volume-. Now the combination of on and loud does not give any effect at all.
The phone is monolithic, the battery cannot be disconnected, there are no slots for a memory card. There is also no way to connect it to a computer. And I can’t take it to the service. We don't have that here.
Any thoughts on what to do so as not to throw it away???

2. SVYATOSLAV
I have a problem on my Lenovo tablet... I updated the phone so I needed it to remove the overlay forever. After the update, after half an hour the screen is black and shows there was an error in the Android application.. I turned it off and rebooted and everything is the same ...then I did a complete reset and for some reason I can’t log into my account... it says we can’t log in for some unknown reason... I have the default settings as he says... and the problem is that I don’t have Without calling up the settings, there’s nothing I can do to enter the settings and disable it.. tell me what to do with this problem... and it doesn’t reset either

3. Natalia
I have Bravis Omega, it started to freeze when I turned it on, I reset it to the Zovad settings... Everything started up fine, I set up the previous applications, I’m happy everything is ok, after a day our song is good, start over... (it started to die out and reboot and freeze on startup ) repeated the procedure... set it up again with one SIM card, turned it off to install the second... And when loading, again, it’s healthy. What is the reason, how to treat it?

4. MiFix
Man, I’ll try your advice right now, otherwise someone sent my dad a message, I went to his link and now the phone just didn’t work, I didn’t go into the phone settings, I couldn’t call anyone and he couldn’t, the app crashed, the bastards sent a virus or what is it was I don’t know, now I’ll try your 2nd and 3rd advice, I knew about 1 but after that the message doesn’t go into the settings

5.Are
I did everything as in method 2, and everything seemed to be updated, but the error “error in the Contact Manager application” pops up on the Lenovo A850+ every second, so much so that it’s not realistic to use the device, and by the way, I have method 2, that is, pressing the button shutdown + top volume button worked like you did in method 3, that is, a menu with hieroglyphs and eMMC opened

6. Bakitchanov
I didn't succeed. The problem is that I bought a new battery because... The old one has gone bad, I put a new battery in the phone, I turn it on, and it turns on endlessly, i.e. First the display shows the picture, and then the dark screen and so on. Well, I tried how you pressed the power button and volume + it doesn’t work, what should I do?

7. Igor
Huge welcome
I received the following phone number: when turned on, SUSAN is written on the screen - under the “battery” - M5, it boots and then asks for a password...
It’s not possible to reset using known methods, we tried all the ways to call Recovery or something similar...
What can be done?
Help, PLIZ

8. Incognito
I have a Lenovo S920, an error occurred in the Contact Manager application, I can’t call anyone, I don’t see missed calls. I reset the settings several times using the first and third methods, but for some reason the second does not work. After resetting, everything works for a few minutes, then the same error occurs again. What to do?

9.KSK
all this is of course very interesting, but I bought an ERGO A503 OPTIMA smartphone and decided to get ROOT rights, pressed the buttons and went to the “recovery” menu and there were several items only in Chinese (and hieroglyphs) like where should I look for what item means what here’s how Should I install CWRP recovery and where should I download SUPER SU?

10. Ruslan
Hello. Please help me with LG Tribute 5. An Android corpse appeared during the LG software update. The first reboot option (via the menu) is not suitable, since the phone does not turn on. I try the second option, at the end after the restart there is a corpse again. There is no third option, since the MMC does not turn on (up + power). What to do?

11. little fox
I had old phone it had an application that did not allow you to enter settings and other applications without a password
I just held this application with my finger to drag it to home screen and there you could find out information about this application or delete it, I just deleted it and that’s it

12.Paata
I have irulu u2. It worked perfectly for 5 months, then it stopped receiving a wi-fi signal, the device sees the signal sources, but does not connect, the antenna does not light up. but the access point works, you can distribute the Internet. I did a reset through the menu, but it didn’t help. what should I do? :(

13. Leon
Tell me, what is the difference between a hard reset and a flashing? If my phone starts to reboot constantly and I suspect that it is some kind of system errors, will a hard reset help in my case? Those. Is a clean factory Android stored somewhere in the device’s memory?

14. Virineya
I thought that method 2 should be done with the phone turned on, it turned out that it was the other way around, you had to turn it off and then do everything that was needed))) thank you very much)))) I couldn’t do it the simple way in the settings, but method 2 helped me very quickly )))

15. stcube84
tell me what to do with "wiko robby" it’s unpleasant but the fact is that he became a brick after offline update it won't start. it says an error, I watched the video and tried it myself, but it didn’t help me ((("there is no command" after restarting.

16.Rest
The nomi i500 phone does not turn on after a reboot - it just blinks... I did all the manipulations, but it continues to blink. A week ago I did a factory reset using the second method and everything worked right away. It seems like now he has covered himself with a copper basin:((

17. Belladonna
on a used phone with graphical private key they couldn’t reset it with the power button and volume, this combination didn’t work, we were tormented by finding the key, we just had to look for the previous owner of the phone, he unlocked it

18. Princess
Hello, recently I can’t go into settings and messages on Saomi Redmi 3c; I press it, they open and immediately close. Can you please help me if I reset it to factory settings?

19. Boris
If everything is done correctly everything works. Programmer, I have a different topic.....after resetting through the phone settings....the phone began to become stupid in general??? What to do???? About the corner of it?????)))))) Or try a second time through recovery?

20. Paper
There is no recovery on the tablet, there is no testing menu and the reset button is blocked by a virus, what should I do?
Kr4 I did everything, I just threw the tablet out the window, thanks for the video which didn’t help me)

21. Fidail
Thank you so much, your video helped me a lot in unlocking my Chinese phone. Hour 100. I searched the Internet for a week for firmware for it, but did not find a suitable one. Helped out great, all the best to you

22. Lombi
Not 1 method didn’t help me, what should I do, some kind of China pops up and it’s nonsense and I can’t, but through the settings there I click to turn everything off and nothing happens, I poked it 100 times and nothing

23. Pavel
I have LENOVO 3GW101 Chinese and English, how can I remove all settings and start from scratch? Otherwise I clicked a lot and need to install everything again. Thank you

24.Deku
Please answer. What to do if no method returns old version Android? And when hard reset via eMMC it gives an error: "eMMC is busy cant format. Please retry"

25. Neko™
Thank you so much, my phone crashed and I didn’t want to accept the correct password, here’s your video) I couldn’t unlock it for a week)))

26. Elite
Thank you very much. Good luck, success, kindness and all the very best. I was about to throw away my phone, and then I saw this video. Thank you very much. Good luck to you

27. Vlad
Short, informative, useful.
While I was watching the video, I already threw it off myself. The problem is that everything is in Chinese and I had a question about choosing a reset line.

28. Andryukha
It doesn’t work on Lenovo On Samsung without a problem, but you need a bit on a Lenovo tablet. It displays 3 options, but they say something about sound but not loading.

29. Cat
My tablet won’t turn on, so option 1 disappears right away... 2 and 3 were also unsuccessful (What should I do? Tablet model: roverpad Sky A70 3G (TM772)