Firmware for Chinese samsung galaxy s4 mtk6575. Installing official firmware on Samsung Galaxy S4 I9500

Instructions for installing the official single-file firmware on the Samsung Galaxy S4 (GT-I950x).

    Drivers and programs

Attention!

To install the official stock firmware on the Galaxy S4 and return the phone's status ("Settings" > "About device" > "Properties" > "Device status") to "Official" after switching from custom firmware and thereby return the ability to receive updates over the air, just follow the instructions provided.

Installation instructions

    Unzip the downloaded archive to a folder with Odin PC for convenience. The file in ".tar" or ".tar.md5" format must be left, but "SS_DL.dll" can be deleted.

    Perform a data reset on the device.
    To do this, go to the settings on the tab " Accounts» to the section « Archive and reset”, select the item “ Reset device” and press the button “ Delete everything". The phone will reboot.

    Run Odin PC as administrator.

    Put the device into download mode ( Download Mode).
    To do this, simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

    In this state, connect the smartphone to the computer. In Odin, the inscription " COM».

    Click on the button " AP» and select the TAR archive of the firmware.

    Items « Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition", if active - must be disabled.

    Click on the button " Start". The firmware installation process will begin.

    At the end of the operation, if everything went well, the message “All threads completed. (succeed 1 / failed 0)". The phone must be rebooted manually by holding down the power button until the screen turns off. The initial boot of the device may take up to 5 minutes.
    ATTENTION!
    If the device does not boot for a long time or a data reset has not been done, it must be performed from the recovery.
    To do this, simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading select " Wipe data/Factory reset", and then - " Reboot system now". If after these steps the device also freezes at boot, you need to reflash it again.

If you're looking for the firmware you need to flash, it can sometimes be difficult to locate online. For Samsung Galaxy S4 I9500 Clone. In this Article/Tutorial about Unbrick Samsung Galaxy S4 I9500 Clone. and download flash files tested and working file. I have explained the method which is used by People or the Repairing Shops. I hope This Tutorial Will Help You To Unbrick Samsung Galaxy S4 I9500 Clone Mediatek Based Devices.

If your Samsung Galaxy S4 I9500 Clone device is corrupt or bricked. Download Samsung Galaxy S4 I9500 Clone firmware from here. (based on your device model number) and flash it on your smartphone or tablet. To get it back to a working condition again. In this post, we share Samsung Galaxy S4 I9500 Clone official Flash file we test this ROM on many phones it,s work well. To download the official firmware of Samsung Galaxy S4 I9500 Clone and flash with any chines Mobiles flashing tool or box.

We will use to unbrick the Samsung Galaxy S4 I9500 Clone as we use for . This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Samsung Galaxy S4 I9500 Clone.

SP flash tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is use on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

The Benefit Of Samsung Galaxy S4 I9500 Clone Firmware:

  • Flash Stock To Unbrick your Samsung Galaxy S4 I9500 Clone
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Samsung Galaxy S4 I9500 Clone
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Samsung Galaxy S4 I9500 Clone
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Samsung Galaxy S4 I9500 Clone Firmware Details:

  • Gapps File: Included
  • Device Supported: Samsung Galaxy S4 I9500 Clone
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek
  • Os:Android
Download
I9500-M6572_FL.rar Mirror

Pre-requirements to Install Firmware on Samsung Galaxy S4 I9500 Clone:

  • Supported Phone: Samsung Galaxy S4 I9500 Clone
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Flash Tool And Drivers:

  • Samsung Galaxy S4 I9500 Clone Flash Tool: Download the and extract it (Install)
  • Samsung Galaxy S4 I9500 Clone VCOM driver: and set up on your pc (still works with MT67xx phones)
  • Windows 10/Pro users: READ:

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Samsung Galaxy S4 I9500 Clone Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Firmware on Samsung Galaxy S4 I9500 Clone:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK android USB drivers.

Step 3: Then download Samsung Galaxy S4 I9500 Clonefirmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flashtool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

How to flash Chinese Samsung Galaxy?


Updated firmware is a great way to make important adjustments to the phone system, getting rid of glitches, making it more technically advanced, adding some new features to the phone. We offer you instructions on how to update the firmware of your Samsung Galaxy via a computer (for example, Samsung firmware GT-I9300 Galaxy S III).

How to flash Samsung Galaxy: instructions

We emphasize right away that, despite the seeming simplicity, the procedure still requires basic knowledge in this area. Therefore, if you are not sure of your competence, it is better to ask professionals.

You can get the utilities necessary for the procedure, for example, on a specialized forum. As an example, we will turn to the site w3bsit3-dns.com for help.

Preparatory work

  1. Go to the page dedicated to the firmware of the phone model indicated in the very first paragraph of the article.
  2. Open the "Official firmware" section and select the latest version (or any other that you are interested in).
  3. Click on the link - it will take you to another page (for example, this one). There you can choose a mirror for downloading the file - Yandex-disk, Google-disk or Cloud Mail.ru. Follow the link and download the file.
  4. Now open the "Driver" spoiler. First of all, you will need to download the Odin3 v3.07 SGSIII program (for example, from this link or from any other site you trust). It will help you to flash the Chinese Samsung Galaxy.
  5. Next, you will need to download and install the Samsung Kies program on your computer (we don’t need the program itself for firmware, but we need USB drivers that the utility automatically installs on the PC). If you have already installed the program, then you do not need to do anything.
  6. For further work will need to be turned off Samsung Kies. To do this, click on its icon on the desktop taskbar right click wave and press "Exit".

Firmware

  1. Let's get back to the firmware. To do this, open the downloads folder, find the zipped Odin installation file there, unzip it. In the regular folder that appears, delete the ss.dll format file.
  2. Then find the archive folder with the installation files for Odin. Unzip it by opening a regular folder and run the installation file in it (it has a colored label).
  3. Turn off your phone.
  4. Now press and hold the volume button (at the point that lowers the sound), simultaneously press and hold the button at the bottom of the Home screen and, without releasing them, press and hold the phone on / off button.
  5. A warning message will appear on the display. After releasing all buttons, press the top of the volume button once - this will allow you to enter flash mode.
  6. Connect your Samsung to your computer with a USB cable.
  7. If the system on the phone is working correctly, if you did everything right, and all the necessary drivers are working adequately, then a small window will light up with a greenish tint in the Odin program window.
  8. Click on the "PDA" button, open the folder with the firmware, click on a single file (remember, we deleted the second one from there) and click in the "Open" window. The name of your firmware should appear in the window opposite "PDA".
  9. After that, in Odin, click on the "Start" button. The process of downloading data will begin, the progress of which can be tracked on the download bar. It will last approximately 4-5 minutes, then the blue “Reset” window will light up.
  10. Disconnect the USB cable.
  11. Close Odin.
  12. Turn on the phone - the OS update message will appear on the display. Wait for the end.
  13. When the phone starts up, you can go to the settings and there in the "Firmware Version" section see the name of the update you installed.

Also read other articles related to this phone model.

Hello, in this article I would like to tell you How to reflash Samsung Galaxy S4 GT-i9500 / GT-i9505

For flashing, you will need a laptop or a computer connected to an uninterruptible power supply, uninterruptible power is a very important item, because in the event of a power outage, it is possible to get a “brick” from the phone,

which cannot be restored at home and you will have to carry your Samsung Galaxy S4 GT-i9500 / GT-i9505 to a service center.
It is desirable to flash through USB port 2.0, with USB ports 3.0 sometimes there are problems (in view of their novelty and not perfection). USB1 ports - not suitable! (too old)
The phone must be connected directly to the USB, and not through the hub!

So, what do you need to reflash Samsung Galaxy S4 GT-i9500 / GT-i9505?
You need to install drivers for your phone on your computer, they can be found at the office. Samsung site.
Download and install the actual program through which we will reflash our Galaxy S4, flasher - Odin v3.07 or a newer version. (Odin is an official program of corporate service centers, therefore I will not give an active link, Google will help).
You need to download the firmware itself, you can also download this rooted SGS4 (root)

Well, let's get started flashing samsung Galaxy S4 GT-i9500 / GT-i9505
We close the Kies program, we kill all processes in Task Manage associated with Kies.
We unpack the firmware that we downloaded into a directory in a simpler way (preferably without Cyrillic, etc.), for example C:\GT-9500\I9500XXUAMDK_I9500SERAMDK_I9500XXUAMDK_HOME.tar.md5

1. Run the program Odin v3.07 with code account administrator, and we see the following window in front of us:

2. Turn off the smartphone. We hold down three buttons on the switched off smartphone (volume down + central soft key + power button. As soon as the inscription on Warning !! appears and then the white-green text, release the keys.

There we read: Volume up: what we need, press the volume rocker up. And we see green android and under it is the inscription, Downloading .., the whole phone is ready for flashing, we entered it into flash mode. (If we press the volume rocker not up, but down, then smart will go into reboot!)

3. Everything is ready for the firmware: We connect the cable (previously inserted into the PC) to the smartphone and see in the upper left corner the inscription “com” with the port number on a blue background (the phone was recognized by Odin)

Drivers will be installed if you are doing this for the first time, so wait until they are fully installed!!

4.If you downloaded an archive that contains only one *.tar or *.tar.md5 file, then we substitute this tar (md5) into Odin3 as a PDA part. We do not touch the rest of the jackdaws. The checkboxes next to Auto Reboot, F.Reset time should be on, the rest of the checkboxes should be as in the picture, that is, empty!!!

Notes: The md5 extension is not recommended to be removed. This is the same tar, but with a file checksum check (CRC).
Some custom firmwares also come with MD5. Their authors do not always understand the meaning of CRC. Those. take stock *.tar.md5 and change the files inside. As a result, the CRC does not match the content, and Odin3 quite rightly begins to swear. In this case, either we ignore this protest, or we delete the md5 extension.
With some firmware comes the SS_DL.dll file. It is present in all firmware downloaded from Kies. Odin does not need this file.

Hello everyone, in this post I will show how you can flash (update software or reflash), get root rights (rooting or rooting), install CWM (custom or non-factory recovery) and perform a factory reset ( hard reset) on a smartphone Samsung Galaxy S4 GT-I9500 16Gb.

It so happened that I had to use it for a whole week at work. If you compare it with mine, then I practically didn’t notice the difference, it’s also stupid in the drain, there are also a lot of applications that are useless for me, but there is one thing - my build quality is better.

And so, when updating the software, I will use the usual factory firmware latest version With Android 4.4.2 , in this article I will not install custom (modified by other "specialists") firmware versions for the reason - well, I don't like them. For about six months I had a non-official firmware on SGS3 - I did not like it. It can be seen that people make them "for themselves." I put the stock back and rutanul. Everything suits me. I need ROOT rights to remove all applications that I do not need and to install programs that need these privileges. I won't go into detail about this. In the following articles.

In operation, I can only say one thing - the most important jamb this phone this is a battery - it swelled up this week. This is a factory marriage (more precisely, a miscalculation). When used, its consumption is 0.7 amperes, and therefore, with prolonged use, the first batteries could not withstand such a load. And one more thing that I did not like - by the end of the warranty period, if you do not use a cover, then the paint from the rim may peel off. In the Chinese, this is almost a rarity, but here the device costs a kilodollar at the start of sales. It was possible to solve this problem. Okay, enough ranting and let's get started. Everything is in order.

ATTENTION!!! Before you start updating software, rooting, resetting settings and other manipulations with your own or, God forbid, someone else's device HIGHLY RECOMMEND read this one. In short, you have been warned and do not say later that you are hearing this for the first time.

Preparation for firmware and other actions.

To start flashing your smartphone, you must first prepare. The preparatory stage does not take much time, but it allows you to do everything without any problems. Everything needs preparation.

  • As usual, I first recommend charge the battery , preferably one hundred percent, but half is enough too. But it’s better not to take risks and put the phone on charge and wait for it to finish;
  • For firmware, we need a regular microUSB cable which is included with the device. Check the phone and cable connectors for serviceability and the absence of dirt and traces of oxide. Otherwise, the device simply will not be detected by the computer and will not be flashed;
  • Drivers are installed with KIES -om or you can install it separately - there is an installation instruction and the file itself;
  • Flasher - Odin3 v3.07 ;
  • Firmware - I9500XXUGNG3 . In the examples, I used this version, although on this moment came out updated. But the main thing is not to show you the process of changing software. Latest firmware version I9500XXUHOD4 is in the files - it is relevant at the moment;
  • cf-auto-root-ja3g-ja3gxx-gti9500 - a file for obtaining root-rights;
  • philz_touch_6.00.8-i9500 file for installing custom recovery;
  • Personal computer or laptop - a simple computer with winXPwin7win8 on board will do;
  • You have probably already thought about where to get all this software - at the end of the post you will find the answer to this question.

Samsung Galaxy S4 GT-I9500 - drivers.

There are several ways to install drivers for Samsung devices. I use only two - the first is to install a synchronization program with a computer called KIES. You can download it on the official SAMSUNG website for free and there it is always the latest version. Look for it on the model page in the technical section. support. I told you how to install it. If you already have it installed, then you can skip this part of the post and go straight to the firmware. If not, then it is better to install the drivers separately. Now I will show you how to do it.

1 step:Download and run the file named SAMSUNG_USB_Driver_for_Mobile_Phones.

2 step:The installer will launch. Click the NEXT button.

3 step:Select your country and language, and then click the NEXT button.

4 step:Choose a disk location for installation or leave everything as it is and click the INSTALL button.

5 step:The process of copying files and installing drivers.

6 step:Installation is completed, press the FINISH button to exit the installer. Now you need to connect the included smartphone to the computer with a cable and wait for the system to automatically detect it.

Update with standard software.

This part will show how this device is flashed with a standard or factory software. This method is absolutely legal and safe both for the guarantee and for the hardware of your smartphone. Also, it is very simple and you will cope with this task the first time ... I'm sure of it. But before doing anything SAVE ALL IMPORTANT AND NECESSARY INFORMATION FROM THE PHONE TO A MEMORY CARD OR OTHER STORAGE MEDIA, OTHERWISE YOU WILL LOSE EVERYTHING AS ALL OF IT WILL BE DELETED. Let's get started.

1 step:Before flashing, you must enter the phone into DOWNLOADING mode. This is done like this - we hold down the volume button down (reduce the sound) and without releasing it, press the HOME button (at the bottom of the front part it is the only one there) and immediately the power button, hold them until the WARNING !! warning appears. Here we are warned about the risks of flashing. If this does not scare you, press the volume up (volume up) button to continue. If you still change your mind, continue to hold down the volume button (volume down) and the phone will reboot. But I hope that you are not shy, so let's continue.

2 step:If a green androyd appears, then you did everything right. This is the download mode.

3 step:Now you need to start the flash driver. Go to the folder with one and run the Odin3 v3.07.exe application.

4 step:This is what it looks like when running.

PIT -JA3G_EUR_OPEN.pit

Bootloader- BL_I9500XXUGNG3_2200416_REV00_user_low_ship.tar.md5

PDA- AP_I9500XXUGNG3_2200416_REV00_user_low_ship.tar.md5

PHONE- CP_I9500XXUGNF6_2068929_REV00_user_low_ship.tar.md5

CSC- CSC_SER_I9500SERGNG3_2200416_REV00_user_low_ship.tar.md5

BE CAREFUL - RECHECK SOME TIMES!!!

6 step:Now you need to connect your phone to your computer. BUT if you have KIES installed, then you need to close it and “kill” all processes in the task manager with a name that contains the word KIES. This must be done. Now connect the device. If the com-port is determined, press the START button in odin.

7 step:The process of copying firmware files has started.

8 step:Wait for the phone to reboot.

9 step:All Samsung Galaxy S4 GT-I9500 is flashed. You can use.

Root rights in 3 minutes

Let's now show how you can get superuser rights or root access. BUT THERE IS ONE MINUS - YOU AUTOMATICALLY LOSE THE OFFICIAL WARRANTY FOR THE SMARTPHONE. AND THEREFORE I DO NOT RECOMMEND YOU DO THIS.

1 step:We enter the device into download mode. How to do this was shown above. We start ODIN.

2 step:Press the PDA button and select the CF-Auto-Root-ja3g-ja3gxx-gti9500. We connect the device to the computer. We are waiting for it to be determined and press the Start button.

3 step:The files will load quickly. The phone will reboot and PASS! will appear. - root received.

4 step:Go to the main menu of the phone and the SuperSU application icon should appear there.

5 step:I WILL REPEAT AGAIN. After rooting, go into Downloading mode and you will see that the custom firmware counter has worked. This means that when contacting the ASC under the manufacturer’s warranty with some kind of malfunction, you will carry out repairs at your own expense. Since you pissed off the guarantee in 3 minutes. It is written in Gar. coupon. Reset this counter more or less in a simple way have not yet learned.

ClockWorkMod recovery (CWM)

CWM is a custom recovery that has much more functionality than the standard one. Here will be shown the installation of the recovery philz touch for our smartphone. When you install this recovery, you also lose the WARRANTY.

1 step:Boot your smartphone into download mode. Run one. Select the philz_touch_6.00.8-i9500 file by pressing the PDA button, connect the body to the computer, after determining the com-port, press the Start button and wait for PASS!. CWM installed.

2 step:This is how CWM philz touch 6.00.8 looks like for SGS4.

Video: pattern reset.

If you forgot the combination graphic key or just want to do a HARD RESET on your smartphone watch this video. It shows everything in detail.

Samsung Galaxy S4 GT-I9500 "SECRETS" of development.

So YOU ​​learned how to flash Samsung Galaxy S4 GT-I9500.

P.S. If you encounter any errors during the firmware process or the device does not want to be detected by the computer at all, read this. It describes typical problems and errors that novice users often encounter.

Share:

Loading...
Top