My iPhone won't turn on when charging, what should I do in this case?

Most users immediately take their gadgets to expensive service centers, although you can solve the problem yourself in just a few minutes.

Let's take a closer look at how to turn it on if it stops responding to key presses in charging mode.

Content:

Checking the cable connection

Due to a cable failure or the use of a non-original accessory, the phone may not start.

Connected to the phone charger, make sure it works and is actually charging.

If the electrical signal does not enter the Lightning connector, a corresponding graphic notification will appear on the screen:

Activating/deactivating power saving mode

You can control the saving mode through the battery saving option.

The appearance of a black screen occurs due to the inability to process the command, since the power saving mode is significantly reduced. After the black screen appears, the phone must be immediately connected to the power supply and only after it is fully charged, turn it on.

You can deactivate the battery saving option only when it is turned on.

If you disable the option in the settings, the device will stop turning off at the last 20% of the remaining charge:

Go to settings. "Battery" tab;
Deactivate the energy saving mode slider;
Enable display of charge percentage.

disabling saving mode

Deactivating the function will prevent random shutdowns of the device and will significantly speed up the operation of the following applications:

Remember that disabling the function leads to the fact that the gadget begins to discharge 20%-30% faster, so you need to monitor the use of programs in background and recharge your smartphone more often.

Force turning on iPhone

If the problem with turning on the phone is not a low charge level, even after several hours of connecting to the mains, the iPhone will not start.

In this case, it is necessary to activate the forced switching on of the device.

Depending on the model, the required key combination may differ. Owners and 6 perform the following actions:

Press the Home and Power buttons at the same time. Do not release them for 15-20 seconds until the Apple logo appears on the display;
Release the keys;
Wait until your phone turns on. This may take longer than normal startup of the smartphone;
Immediately after turning on, connect the gadget to the power cable.

If you have an iPhone 7, you need to hold down the "Power" and "Power" buttons to boot. "Volume Down".

Mechanical damage to the Lightning connector

Often the iPhone does not turn on while charging due to mechanical damage or contamination of the Lightning connector.

Thus, the device eliminates the possibility of a short circuit or simply cannot recognize the cable connected to it and begin the battery charging process.

Dust, lint, pet hair, and other dirt accumulate in the connector. The easiest way to get rid of it is with a regular toothpick or needle. With its help you can get out all the garbage. You can remove any remaining dust using a small brush.

cleaning the Lightning port

Software glitch in iOS. Recovery via iTunes

A sudden shutdown of the device may occur due to the incorrect operation of a certain program or after the system has been infected with virus software.

Software glitch does not allow the gadget to launch and blocks access to user files. Such failures were foreseen by Apple developers.

To quickly restore user data, iPhone regularly saves backup copies of files, folders and settings to cloud storage or to a computer using synchronization with.

Since we can't turn on the phone, further work needs to be done :

PC connection

Update installation error

If, after trying to turn on the iPhone, it does not boot, and an apple icon appears on the screen, the problem arose due to an error during the installation of the firmware update.

You need to perform a forced reboot or connect the gadget to the computer.

And in the main window of the desktop application, click on the “Update” button.

At this time, the computer must be connected to global network to download new version iOS from the server was successful. The latest firmware will be installed on the iPhone again and it will reboot immediately after the installation is completed.

firmware update via iTunes

IPhone hardware failure

Problems with turning on the iPhone can have not only software, but also hardware origin.

If you were unable to “revive” your iPhone using the methods described above, the problem is 100% likely to be the failure of one or more physical components.

This happens when the phone is dropped or hit hard. Common problems include the following::

. The only solution to the problem is to replace the battery with a new one;
Damage to the lower cable, which is responsible for synchronizing iPhone components. The part needs to be replaced. After this, the phone will turn on, charge and connect to the computer in normal mode;
Power controller failure. It is the failure of this part that causes the phone to turn off even with a full battery charge;
Damage to power circuits;
Failure of other components of the motherboard.

Please note that repairs to the power circuits, controller and other components of the board are prohibited. Any modifications in the structure and verification data can turn your IPhone into a brick after the next turn on.

Changed hardware data will not be recognized by the Apple server and the gadget will automatically be identified as stolen or counterfeit. The problem can be solved by replacing the entire motherboard entirely. Make sure you are purchasing a genuine model with working parts.

After installing the new main board, all problems with charging, battery operation and sudden shutdown of the gadget will be eliminated.

Battery Replacement. Instructions

Apple advises changing it every two to three years. During this time, the component fails and can no longer support normal work devices.

To replace the battery you will need a new battery for your iPhone model and a set of the following tools:

Spudger– a plastic oblong spatula for disconnecting cables;
Suction cup for opening the case;
Philips screwdriver set (selected individually for each device model). It is possible to buy not the entire set, but only a few parts. This option is suitable for those who do not plan to repair other phone components in the future;
Tweezers.

The article describes in detail how you can turn on iPhone 5 using conventional and unusual methods, what breakdowns occur and how to solve them.

How to turn on iPhone 5?

iPhone 5 was released in 2013 and gained immense popularity, like most Apple devices. It has always been famous for its ease of use, speed of operation and beautiful design. However, any device always has problems from time to time software or from the technical side. Even the iPhone 5. Despite the fact that the phone is of high quality, sometimes breakdowns will still occur. For example, the iPhone may not turn on. And some new users who hold the device in their hands for the first time also do not know how to turn on the iPhone 5.

Let's look at several causes of iPhone 5 problems and how to fix them.

How can you turn on iPhone 5?

The easiest way to turn on an Apple phone is to press the POWER button and hold it until the iPhone 5 turns on. It usually takes a few seconds.

It happens that in this way the phone still does not turn on. Then the creators of the iPhone came up with a function to turn on the phone by pressing the POWER and HOME buttons for seven seconds.

IPhone - Home and Power button not working

iPhone- not working button Home and Power Our digital magazine:

How to turn iPhone OFF and ON WITHOUT POWER BUTTON?

In this #video I talked about how you can # switch off And # turn on iPhone, #iPad and #iPod without button nutrition. And so, I’ll turn it off...

iPhone 5 is dead

The most popular reason for the phone not turning on is when charging is finished. In this case, you just need to put the phone on charge and let it charge for at least ten minutes before turning it on. Although usually the phone turns on on its own while charging.

iPhone 5 is charged but won't turn on

If after charging the phone still does not turn on, then in this case you can try the second method of turning on the phone by pressing two buttons, which is described in the first section. If this method did not help, then the phone has some kind of malfunction in the technical or software part, which will be discussed later.

Power button is broken

Sometimes they break Power buttons on iPhone 5 or breaks off. In this case, turning on the phone will become a real problem. You can try putting the phone on charge and it should turn on by itself. However, this method does not always work, and it is not possible to carry a charger with you all the time.

iPhone 5 got wet or overheated

The phone may break after getting wet. It's worth waiting a few days or even weeks, leaving it in a warm, dry place to dry out the insides. After this, you can try to turn on the iPhone or take it to the service.

If you leave your phone in the sun or in a place where the temperature is high for a very long time, the iPhone may overheat or even melt. After this, it will not turn on immediately until the flash memory and processor are too hot to work. Before trying to turn it on, it is better to wait until the phone cools down until normal temperature and then try to turn it on.

iPhone 5 won't turn on by any means

If the iPhone is so damaged that it won’t turn on by any means. in the usual ways, then in this case it must be taken to the service to correct problems in the software or technical sector.

You can read more about everything in our article How to turn on your iPhone.

So you have become happy owner a brand new product from the famous Apple company. How to turn on iPhone and how to start using it? iPhones of all generations are turned on as standard - using the Power button located at the top right of the phone. The same button is responsible for locking and unlocking the phone.

But even after turning it on, it is most often impossible to use the iPhone. In order for the device to begin fully functioning, it must be activated. If you bought a phone from one of the major mobile operators such as MTS or Megafon, then it will most likely already be activated. But if not, then you can do this operation without problems.

Let's take a step-by-step look at how to turn on your iPhone and activate your new phone.

1. Take your iPhone and PC cable out of the box.

2. Download and install on your computer special program iTunes.

3. Insert a SIM card into the phone, turn it on using the Power button, connect the phone to the computer via the cable that was included.

4. Most often, iTunes starts automatically. If not, run the program manually. She herself will offer to activate the device. We confirm the request.

5. Leave the iPhone alone and wait for activation to occur. While there is no activation, the device displays a waiting message. While the process is going on, you can familiarize yourself with the capabilities of the device that do not require communication, for example, with the camera, importing photos, menus, etc.

6. When activation is complete, try calling. If everything is in order, the phone will dial the number. This means that the full functionality of your iPhone is enabled.

How to turn on iPhone 4s

For this generation of iPhones, the activation process was significantly simplified - using a computer was no longer necessary.

How to turn on iPhone without using iTunes.

1. Insert the SIM card, turn on the phone using the “Power” button.

2. Choose a familiar interface language: Russian-Russia

3. The phone asks whether you will allow it to determine your location or not (this will be needed later to use maps, check-ins on Facebook, etc.). If these functions are needed, then we allow them.

4. Next the iPhone will ask WiFi connection. In principle, this step is optional. It can be done later, at any time. We will still need the Internet to send information to Apple about the successful activation of the device, as well as for the operation of various online services such as iCloud and iTunes Match. For the same purposes, you can successfully use mobile internet local operator (3G/GPRS).

5. Now the iPhone will register on the network mobile operator, will receive the necessary settings for MMS, SMS. If you previously had a different iPhone, they will offer to restore the previously saved data from backup. And if the iPhone is new, then you need to select “Set up a new device.” In general, after this you can already use the phone fully. Further steps are in principle optional, but highly desirable.

6. Again, you need to connect to the Internet and log in with your Apple ID (this is a personal account for all Apple services). If you don't have one, you need to create one new account- it's free and easy.

7. An agreement appears that you need to accept (it would be good to read it first), then enable (or not enable) voice assistant.

8. Whether we agree or not that Apple conducts diagnostic reports, click the “Start using” button. That's all, actually.

Don’t forget also that you can activate your iPhone 4s using using iTunes.

How to turn on iPhone if the "On" button does not work

If you hold the power button for a long time, but the phone does not respond, it means that the problem is most likely in the upper cable where the button is located. Then there will be problems with the headphone jack, the volume control buttons, and the silent mode switch.

Perhaps the power button has sunk, reaching the same height as the body. You need to check: maybe the fasteners are cracked or the screws are loose.

In any case, if the button does not work, then the phone must be taken to the service. It is better not to open it yourself.

How to turn on iPhone if it's frozen

To do this you need to use the mode forced reboot: simultaneously press and long hold the “On” button (at the top) and the “Home” button (the only round button below the screen). After this, the phone will turn off. If you turn it back on, it will take longer to reboot than usual, but the problems will automatically be fixed.

How to turn on iPhone 3G

On home page screen you need to click “Settings” - “General” - “Network”. In the next window, swipe the slider. Click the “On” position next to 3G.

When the 3G protocol is used, the information loads faster, but the battery power is also consumed faster.

Today we will be for the first time turn on and activate our iPhone, in my case it's an iPhone 5S. I will tell you in detail how this is done, and also point out the errors and problems that I encountered during the process of activating my iPhone.

Preparing to activate your iPhone

Before we start the first switch-on, we need to prepare in advance so that the process goes smoothly and without errors.

What we need:

At least 20-30% charge.
Access to the Internet via Wi-Fi or via a PC/Laptop with the latest version of iTunes and connected to the Internet.
Nano SIM card.

If your device is completely discharged, take USB cable and connect it to a computer or electrical network via the adapter that comes with the kit.

if you have WiFi, then check that it is available and you have Internet access.

If it is not there, then you will need your computer or laptop, which will be connected to the Internet. You need to download and install it on it (your computer) latest version applications iTunes from the official website, link: http://itunes.apple.com/.

After the preparatory stages, you can begin activation.

iPhone activation

We will activate the iPhone with a SIM card, and accordingly the activation will consist of the following steps:

Inclusion
Basic settings
Connecting to a computer and activation
First start

IMPORTANT! If your phone is locked, then to activate it you will need a SIM card from the operator to which it is locked!

Turning on the device

In order to turn on the device, you need to press and hold the button for a few seconds. "inclusions", which is located on the top of the device. See photo below.

If everything was done correctly, a silver apple will appear on the iPhone screen, which means you can proceed to the next stage.

Basic iPhone settings

After turning on the device, you will see a welcome message on the screen in various languages. Now, with a slight movement of your finger, from left to right, we drag along the bottom of the screen.

Then we select the language we need, it can be any from the list.

In the next step, select your country.

If you have Wi-Fi, then select it from the list and enter the password. For those who don't have it, you'll need to activate it through iTunes on your PC.

Connect the phone to the computer and continue activation

We'll need ours USB cable And computer/laptop (PC). We connect the cable to the iPhone, and then to your PC.

After which you should see a picture on the screen of your phone as in the photo below:

The first thing you need to do after connecting is to enable or disable it. They are required to use GPS, Google maps and so on. They can be enabled now or later, after installation. I decided to turn them on right away.

In the next step we select the item “set phone as new”, since this is our first turn on and we have nothing to restore yet.

For iPhone 5S owners, there is one item that can be completed immediately or postponed until later. I decided to do it right away, if you do too, then click on "Set Up Now"

Now we need to press and release the button several times (about 10-20) "home", as shown on the screen of your smartphone. If you did everything correctly, you will see a picture and a message like in my photo below.

Since we have set up a fingerprint, we need to set a password. After all, we won’t always have the opportunity to remove it. For example, you may be wearing gloves or have a dirty finger that you need, who knows what. Therefore, for convenience, there is a digital combination that also needs to be set and remembered.

The next and final step is "diagnostics", i.e. you need to decide whether or not to allow the phone to send data to Apple's servers. This could be error data or something else. I decided not to do this, and accordingly I chose "Don't Send"(do not send).

After this, you will see the long-awaited greeting on your screen! This means that you have successfully installed and activated your iPhone! Congratulations!

If something didn’t work out for you, then I advise you to look at the problems that arose during my first launch, and also watch the video where I explained everything in detail.

iPhone activation problems and solutions

I will describe the problems that I had when activating my IPhone 5S, as well as their solutions.

If you do not remove the factory film from the phone, then it is almost impossible to press the “Home” button (round, on the front, bottom of the phone). Therefore, when the phone was automatically locked, I had to press the power button (on top of the phone).
Due to the lack of Wi-Fi, a computer was needed.
Since I had old version iTunes, I couldn't connect my phone to my computer. I had to first download and update it to the latest version.
For iTunes updates it must be closed, otherwise it will not update and will give an update error.
To remove a fingerprint, you need to remove the factory film, otherwise nothing will work, since the sensor does not recognize it from under the film.

These are the problems I encountered during my activation and first launch, I hope my experience will allow you to avoid them.

I also advise you to look at the “Apple support” page, there are already many answers to activation problems, link: http://support.apple.com/kb/ts3424?viewlocale=ru_RU&locale=ru_RU.

Tutorial video “Activate iPhone”

You can leave your questions and comments in the comments below.

iPhone 5 was released in 2013 and gained immense popularity, like most Apple devices. It has always been famous for its ease of use, speed of operation and beautiful design. However, any device always has problems from time to time in the software or on the technical side. Even the iPhone 5. Despite the fact that the phone is of high quality, sometimes breakdowns will still occur. For example, the iPhone may not turn on. And some new users who hold the device in their hands for the first time also do not know how to turn on the iPhone 5.

Let's look at several causes of iPhone 5 problems and how to fix them.

How can you turn on iPhone 5?

The easiest way to turn on an Apple phone is to press the POWER button and hold it until the iPhone 5 turns on. It usually takes a few seconds.

It happens that in this way the phone still does not turn on. Then the creators of the iPhone came up with a function to turn on the phone by pressing the POWER and HOME buttons for seven seconds.

If the phone still does not turn on, then there are several options to solve the problem. Let's look at them in more detail below.

iPhone 5 is dead

iPhone 5 is charged but won't turn on

If after charging the phone still does not turn on, then in this case you can try the second method of turning on the phone by pressing two buttons, which is described in the first section. If this method does not help, then the phone has some kind of technical or software problem, which will be discussed below.

Power button is broken

It happens that the Power buttons on iPhone 5 break or break off. In this case, turning on the phone will become a real problem. You can try putting the phone on charge and it should turn on by itself. However, this method does not always work, and it is not possible to carry a charger with you all the time.

iPhone 5 got wet or overheated

iPhone 5 won't turn on by any means

If the iPhone is so damaged that it cannot be turned on by any normal means, then in this case it must be taken to a service center to correct problems in the software or technical sector.

You can read more about everything in our article.