The Internet has opened up an endless space of information to people, but there was still ahead: wireless networks operating according to the Wireless Fidelity standard, better known as WiFi, have become a real breakthrough. In order to enjoy the benefits of the WiFi operator ByFly, you need to purchase a special adapter or modem with WiFi support and perform the following settings (using the Promsvyaz M-200A modem as an example).
Connect the modem to your computer or laptop using a cable. Type 192.168.1.1 in the address bar of your browser, then press Enter. Next, a window should appear asking for a login and password - as a rule, you need to enter the word Admin in both fields. If your computer does not respond and does not ask you for a password, you may need to set up a network connection. This can be done through the control panel: for Windows 7 - in the "Change adapter settings" section of the Network and Control Center and public access, and for Windows XP - in the "Network Connections" section. Check the properties of the network connection - in the line "TCP / IP Protocol Parameter" (Internet Protocol for Windows 7), the function of automatically obtaining an ip address should be enabled. The next step is to set the modem to router mode. This is not difficult, you will need to enter several parameters according to the instructions and the contract for connecting to the Internet. So, in the Interface Setup menu, select the Internet section. Then carefully enter desired parameters: In the Encapsulation field, enable the PPPoA/PPPoE item for the ISP parameter. Then, in the PPPoA / PPPoE field, fill in the Username and Password columns - this is exactly the information that is contained in your agreement with the telecom operator. Next, set Bridge Interface to Activated and Default Route to Yes. Check the correctness of the data entered and click the Save button at the bottom of the screen.
If you made a mistake during the settings process or the modem settings are not available, try to return to the factory settings - to do this, hold Reset button on the modem case for a few seconds, and then follow all the steps from the first step.
Hello, friends! In this article, I will give you the answer to the question - how to set up wifi on byfly? After all, using a router at home, you can access the Internet from several computers or devices that support wifi technology at once. Undoubtedly, this is very convenient and will save you from the ever-interfering Internet cables under your feet. In this article, we will consider the ZTE modem and Promsvyaz M200A.
Setting up wifi on byfly begins with connecting the cable to your modem and computer. To do this, we take the wire that was included with the modem and connect one end to the computer's network card, and the other to the LAN port on the modem. Just don't confuse it with an ADSL port, it won't fit there anyway.
Go to the modem interface
The basic configuration of the byfly router begins with entering the modem interface. To do this, open any Internet browser (Opera, GC, IE, MF, Safari) and in the address bar located at the very top, drive in the following - 192.168.1.1 and press Enter. You will be prompted to enter a username and password. Enter the username admin and the password also admin. And you get to the modem interface.
Setting up the Internet
And at the end wifi setup on byfly moved on to the main point - setting up an Internet connection. And so let's get started, click the "Interface Setup" tab and immediately go to the "Internet" submenu. In the Encapsulation item, set the point to "PPPoA / PPPoE" and select "PPPoE LLC" below. Next, you need to enter your data for connecting to the Internet. In the "User Name" field, enter your name according to the contract. And in the "Password" field, also enter your password for the Internet. We put a dot in the “Bridge Inteface” item on Activated. We check whether the point is on the “Default Route” item on the Yes option. Press the "Save" button.
LAN setup
Basically settings local network you can not change it, or how to set it as in the picture and enter the DNS of your city (the example shows for the city of Minsk). After changing the settings, do not forget to save by clicking on the "Save" button.
Setting up a wireless network
Setting up wifi on byfly proceeds to the final point, namely setting up wireless network. To do this, go to the Wireless tab. First, activate wi-fi on the router (it can be disabled by default). In the "Access Point Settings" item, put a dot in the Activated option. In the "Pre-Shared Key" field, enter your password to enter the wifi network. We come up with and write the name of the network in the "SSID" field (the English layout is required. Click the "Save" button.
I hope that I was able to answer the question in the most detail - how to set up wifi on byfly. I think this article will help you become more experienced and raise your level of knowledge in the field computer literacy and networks.
We solve additional problems
If the form for specifying a login and password does not open, you should check, how well the modem is connected to the computer. Then you have to try again getip address from the modem.
To do this, open settings wired network connection, and then go to internet protocol fourth version. Check if the checkbox is checked automatic getting an ip address.
Search network connections need in " Network and Sharing Center» - change adapter parameters. 
Suppose you have done everything, but the parameters are still not available, then you need to return them to the factory settings. You need to turn the modem over and find a hole there with the inscription “ reset". A button is hidden in it, which must be pressed with a thin needle. Hold it down for 5 to 10 seconds and release. Then all modem settings will be reset to factory settings.
This is suitable if the modem was configured correctly, but you changed in the settings and now the Internet does not work.
Reset button Setting up the Internet
After all the manipulations, we still managed to get into the web interface. At the top of the screen is menu modem, and at the bottom are broken into blocks settings. For the setup to be correct, it is carried out in two stages:
- The modem is configured as router.
- Customizable access point, that is, the WiFi itself.
Let's start with the first point.
WiFi setup
It remains only to configure access point. To do this, the menu InterfaceSetup Choose a section Wireless. This option is required for WiFi to work. activate, for this PerSSID Switch is set to activated.
Further installed Name networks and password access to it in the SSID and Pre-Shared Key fields. The password must be at least 8 characters of the Latin alphabet. Make it complex if your router's performance is up to your neighbors. Otherwise, you will suffer from low speed. So that no one can connect to the access point, it should be in the column Authentication install WPA-PSK, and TKIP in the column Encryption. It remains to click Save and WiFi is configured. You now have an internet connection within range of your router.
WiFi settings If during the setup, something went wrong, it is worth doing factory reset settings and do it all over again. Any settings should be set exactly as in the instructions. Any deviation may cause the device to malfunction.
Quick reset
In order not to press the button, you can make it easier. The network settings are still reset like this:
Now you can re-adjust. This will restore the normal functioning of the device and the Internet, respectively. Also worth doing reset if the parameters were set incorrectly. Or go through each item again and double-check everything.
Here the Internet settings are fully completed and you can freely connect from any device that has WiFi support.
Byfly is a trademark of Beltelecom, which provides access to high-speed Internet. It so happened that users do not always manage to correctly configure access to the network themselves. This applies to both home Wi-Fi connections and public ones. In this article, we'll look at both options.
Ways to connect public Wi-Fi
byfly wireless access points are installed in many public places, access to which is carried out through the user's login and password. These data can be obtained temporarily, or you can secure them for a long time. Both methods are presented below.
Temporary free access
It is convenient to use this option if you urgently need to go online, but do not want to make a card and conclude an agreement. The setup takes a couple of minutes.
- Turn on Wi-fi on your device and connect to the network.
- Go to your browser and try to visit any site.
- After the authorization page appears, enter your phone number and select the access time "15 minutes".
- You will receive an SMS with your username and password.
- Enter these data on the authorization page and click "Login".
- Ready! You can use the internet for 15 minutes.
Note! If you need more than 15 minutes, then specify the required amount and pay the selected tariff.
Permanent access
This tariff without a monthly fee gives the right to replenish the card and use Internet access at any time. You can get the card at service center Beltelecom by signing an agreement. This option is the most convenient for residents of the city.
Important! To receive a card, you must have identification documents.
Setting up a home modem
We figured out the setting up of the public network, and now let's get down to Wi-Fi setup Houses. All actions must be performed on a PC with a modem connected to it via a cable. The setting is carried out on the example of the Promsvyaz M-200A device.
- Go to your browser and type "http://192.168.1.1"
- In the window that appears, enter your login information. By default, the login and password are “admin” (If the login window does not appear, then see the following instruction).
- Click "Interface Setup" → "Internet".
- Set the "ISP" parameter to "PPPoA / PPPoE".
- In the "Username" and "Password" fields, enter the username and password of the user (These data can be found in the contract for the provision of Internet connection services).
- Set the "Bridge Interface" parameter to "Activated" and below the "Default Route" parameter to "Yes".
- Click "Save".
- In the top menu "Interface Setup" → "Wireless".
- Set the "PerSSID Switch" parameter to "Activated".
- Create a name and password for your Wi-Fi network.
- Click "Save".
After completing these steps, you will have a Wi-Fi access point ready to use.
If you do not see the login window, then configure network card.
- By clicking on the network icon with RMB, go to the "Network and Sharing Center".
- Go to "Change adapter settings".
- Right-click on the label "Local Area Connection" → "Properties".
- Select Internet Protocol Version 4 TCP/IPv4 → Properties.
- Check the box next to "Use the following IP address".
- Enter "192.168.1.2" in the IP address field, enter the subnet mask "255.255.255.0", and enter "192.168.1.1" in the "Default Gateway".
- Enter the addresses of the DNS servers (you can find them on the website
Setting up ByFly Internet. Connection to wifi belttelecom. All the necessary settings for the modem from Beltelecom are described here: for the modem to work in ByFly router mode - the Internet works automatically immediately (without connecting through a shortcut), it becomes possible to connect several computers (laptops, phones, tablets) at once - thus creating a home wireless network, to set up a Wi-Fi connection where the modem itself acts as an access point.
To set up, we need a working computer, a laptop, a netbook, without viruses, a modem (it is also a router and a Wi-Fi access point) Promsvyaz and a network cable (included), the By Fly Internet service connected.
Description of connection of modems, wireless access points D-Link, Zyxel, - are not considered in this article.
To correctly configure ByFly internet and wi-fi connection necessary:
- connect the cable to network port computer (laptop) 2 or 3 modem port.
- turn on the power in the computer, laptop and modem. Wait until the system is fully loaded on the computer and the modem-router is initialized.
- it is advisable to remove the old antivirus (especially if it is not updated - it can block). Sometimes you have to install windows again, because the main problem is often not a modem, but a virus computer, and the Internet does not work, it works slowly and with breaks precisely because of this.
- launch OPERA browser.IE.
- in the address bar, enter (without spaces) the numbers: 192.168.1.1 (this is the address of our ByFly modem on the network).
- press ENTER.
Enter in both windows (password and user): admin (5 letters in English).
We get into the modem interface.
Click the Interface Setup tab. We get into the Interface Setup tab and the Internet sub-tab.
Everything should be like in the picture below.
You need to change the fields: username (in the Beltelecom agreement - the user), password (in the agreement this is the password) and Bridge Inteface. We check the presence of the active checkbox Default Route in the YES position.
We press SAVE.
Click the LAN tab. You can't change anything here DNS servers rise automatically!)
Or as in the figure for the city of Minsk. We put the DNS Relay in the USED USER DESCOVERED DNS state (use user-defined DNS servers - specify for your region, in the figure DNS By Fly for Minsk.)
If changed, press SAVE.
If you are using the modem as wired router(i.e. you don't need w-fi) further Setting up By Fly Internet is not required, it is not enough that it is also undesirable. Activating the wi-fi module in the modem will make the device a source of radio interference, electromagnetic radiation(not good for health), a "black door" for an intruder.
Click the Wireless tab. This is the setting wireless connection wi-fi for By Fly.
We change only what is indicated by the arrows in the picture.
We activate the wi-fi module in the router (it can be disabled by default - the menu items are not active).
As a rule, it is necessary to put the point in the Activated position in the Access Point Settings menu.
Be sure to change the Pre-Shared Key item. This is your password to enter your wi-fi network. For convenience, change the SSID - this is the name of your network, make it unique to recognize. Name it (for example) BIGMAN (English layout is required), or in your own way.
We press SAVE.
The modem is ready to work. We disconnect the network cable from the computer (laptop) to check the wi-fi operation (if necessary).
We turn on the wi-fi card on the laptop - we are looking for a network (as prescribed in the SSID). Click connect, enter the password that you entered during setup in the Pre-Shared Key item.
Everything should work. If the computer or laptop does not display the network, the driver for the network card may not be installed, or there are other problems.
Thus, a sufficient number of devices can be connected to our wireless network, as well as through a cable, at the same time, which will work with an Internet connection without interfering with each other.
Loading...