As soon as the release of the new iOS 11 firmware took place, users began to install new software on their iPhone, iPad and iPad without wasting time. iPod Touch. However, the installation process did not go smoothly for everyone. Some mobile users have encountered various errors after updating to iOS 11. In this article, we will cover the most common problems after installing iOS 11 and, most importantly, how to solve them.
Errors after iOS 11 update
No matter which version software iOS you install, most often the same errors occur. There may be several ways to solve them, but we will note the simplest and fastest.
iOS 11 update installation failure
This typical mistake, which can be encountered during the installation of any version of iOS software. The reason for its appearance is a failure on the side of Apple servers. Traditionally, this happens in the very first hours after the public launch of the update. Here it is recommended to just be patient and wait until the hype subsides.
iPhone stuck on black screen, Apple logo after iOS 11 update
A fairly common case when, after installing the iOS 11 update, users see that their iPhone is frozen on a black screen and the apple logo. What to do in this case? It also happens that the device screen simply stops responding to the user's touch. You can solve the problem very quickly using the PhoneRescue program. There is a separate mode for solving the most common problems on the iOS system.
iPhone keeps restarting after iOS 11 update
Several users have also reported incorrect operation of their smartphones and tablets. After installation new iOS iPhone 11 keeps turning off and then rebooting cyclically and can't start. If this does not help forced reboot by pressing the power button and the HOME button at the same time, then you should turn to the PhoneRescue program again.
iTunes doesn't see iPhone after iOS 11 update. iPhone stuck in recovery mode
These two errors also regularly occur after installing the iOS 11 update. You already know what to do and how to fix the problem. Use the PhoneRescue program, it will solve everything system errors in a couple of minutes and in a few clicks.
Please note that the PhoneRescue program solves all bugs and problems without losing data on your device. You don't have to worry that some files or valuable data will be lost after recovery. This is out of the question. In just one click, the utility will turn your "brick" into a working device, while retaining all the information.
How to recover data after updating to iOS 11
Another problem that you may have experienced while downloading and installing iOS 11 is data loss on the device. With PhoneRescue, you can recover data on iPhone/iPad in one of three ways. If you have previously done backup data, you can choose to restore from an iTunes or iCloud backup. If there is no "backup" file, you can use the very first mode - data recovery directly from the iOS device itself.
PhoneRescue can recover such types of data as photos, videos, music, messages and attachments, contacts, call histories, correspondence in popular instant messengers, voice recordings, Safari stories, e-books and not only. Moreover, this tool works as quickly as possible and will be clear to use even for non-advanced users.
As you can see, with the help of the program, you can fix most of the errors and problems after updating iOS 11. By the way, PhoneRescue can be used on both Windows and Mac. You can download PhoneRescue for free.
iOS 11 bugs plague iPhone, iPad and iPod touch. If your device stops working, try a fix from our list before moving to iOS 10. Apple's iOS 11 has an impressive feature set, but like other versions, iOS 11 is full of bugs and problems. Also on ios 11 added a dark theme.
Noticed battery drain wifi problems, various application errors, lags, random reboots, installation errors, and much, much more. While some bugs may require you to upgrade to iOS 10, others will take a few seconds or a few minutes of your time.
Today we want to describe the most common iOS 11 errors we've encountered and show you a few ways to fix them on your device.
Bugs iOS 11 works with various Wi-Fi issues. Some users have noticed slow speeds, while for others it often doesn't work. Wi-Fi issues are usually hard to fix, but here are a few fixes.
First, you need to make sure it's not a router/Internet Service Provider (ISP) issue. If your wifi connection starts working, try unplugging your router for a couple of minutes before testing again. We also recommend that you see if there is a denial of service in your area.
If you're sure it's not a disconnect or router issue, you should be in the Settings app and have your Wi-Fi passwords.
Go to Settings > Wi-Fi Select your connection > and tap on "Block this network" at the top of the screen. Connect if you can and check for problems.
If you're still noticing problems, go to "Settings" "General" "Reset" "Reset Network Settings". This will make your device forget the saved passwords.
If that doesn't help you, Apple has its own guide to Wi-Fi issues. You can find the fix there.
How to fix iOS 11 lock screen issues?
iOS 11 users are facing an issue where the lock screen sometimes shows the desktop wallpaper instead of the lock screen wallpaper.
We've seen this issue and also had an issue where part of a control gets stuck on the lock screen. You can see what we mean in the photo above.
These are not problems with the game, but they are annoying. Fortunately, there is an easy way to fix them.
To fix iOS 11 errors, restart your iPhone, iPad, or iPod touch. The wallpaper should return to normal. Download beautiful wallpapers for your phone.
How to fix iOS 11 AirPod errors?
If your AirPods won't connect to your device, or if only one AirPod connects, try this.
Take both AirPods, put them in the case, close the case, wait 5-10 seconds, and then slowly pull them out along with the phone so they are next to it.
The iPhone 8 is rumored to include AirPods and "Enhanced" audio features.
How to fix iOS 11 touchscreen bug?
If your device screen starts to freeze or if it doesn't respond to taps in iOS 11, here are some fixes that helped us.
If your screen stops responding to touches and taps, hold the power button and the home button at the same time (volume down button and power button on iPhone 7/iPhone 7 Plus). After a few seconds, your phone will reboot and problems with touch screen will disappear.
If it doesn't work the first time, try again until it works. How to Record Screen in iOS 11 on iPhone and iPad in One Swipe?
How to fix iOS 11 performance bugs?
If you're facing performance issues in iOS 11 like lags, random reboots, and lockups, we've got you covered.
A simple restart does not fix the problem(s).
If you experience stuttering when switching apps, try adjusting the speed at which you press the home button. To do this, go to the menu "Settings" "General" "Accessibility" "Home".
How to fix app errors in iOS 11?
If you're having problems downloading apps or app updates from the store, restart your device and try downloading again. It should work. If the download is stuck, quickly tap "Update" on the app until the "Open" symbol appears.
If you are dealing with application performance issues, make sure the application is up to date with the latest bug fixes. If that doesn't help, try reinstalling the app.
If these fixes don't help and your problems become unbearable, you will need to upgrade to ios 10. iPhone music download apps.
How to fix iOS 11 bugs, Sound?
If your sound suddenly cuts out while you're on the desktop or while using an app, don't panic. You should fix the problem in seconds.
Restarting your phone or tablet will fix the problem. Hold the power button to turn off, turn on the device and check. You should also try turning Bluetooth on and off to see if that fixes the issue.
If these sound issues are happening on a particular app, check what version of the app you have and if it's out of date, update.
We also recommend looking into the speaker grille to make sure debris isn't causing problems. If you notice something, remove it carefully, make sure it improves the sound of your device. Also announced a new sound device with support for siri, HomePod.
How to fix iOS 11 bugs if nothing works?
You can't fix iOS 11 bugs, try restoring to a backup or resetting all settings. If that doesn't work, contact Apple Service.
When updating to iOS 11, some users encountered the problem that their screen stopped working. This problem occurs on the iPhone and iPad, and although it does not occur very often, it still touches many people.
Touch screen malfunctions
On this moment the cause of this glitch is unknown. Currently, there are a couple of types of its manifestation:
- The touch screen completely stops working, that is, the screen does not react at all to user actions.
- Part of the display starts flickering and stops working.
Errors appear after installing iOS 11 and are treated only by rebooting the device or restoring via DFU.
Forced reboot of the device
Touchscreen failure after update is software glitch so fix it without sending it in for repairs service center. First of all, reboot your device. If the screen still refuses to respond to touch, then you should perform a forced reboot.
- Press and hold the Home and Power buttons for a few seconds (Power and volume down if you have an iPhone 7 or older). The screen should turn off.
Release the buttons. If the apple does not light up on the screen, briefly press the power key 
Recovery via DFU
If you're experiencing a touchscreen malfunction after installing iOS 11 and a hard reset didn't fix the issue, you might want to try downgrading to iOS 10.3.3. Download the firmware for your device and start putting your phone/tablet into DFU mode.
- Launch iTunes
- Connect iPhone/iPad to computer
- Simultaneously hold down the Home and Power buttons. Hold them for 10 seconds.
- Release the Power key and keep holding the Home key. Within 15-30 seconds, iTunes will show a message that the device has been found in recovery mode. The iPhone/iPad screen will remain black.
If iTunes doesn't show a message that the device is in recovery mode, then you haven't held down the buttons long enough. Take a stopwatch and try to put your phone back into DFU mode. 
After recovery in DFU mode when the firmware is rolled back, all data will be deleted from the memory. In order not to lose them permanently, make a backup copy. To rollback to iOS 10.3.3.
After the installation is complete, you can restore iPhone as new or restore the device from a backup made before updating to iOS 11. On iOS 10.3.3. there are no software failures in the operation of the touchscreen, so the problem will be solved. It remains only to wait for the release of the next update with bug fixes for iOS 11.
iOS 11.0.1 update
After numerous reports about the incorrect operation of iOS 11 on different devices Apple developers promptly released iOS update 11.0.1, which fixed critical bugs. 
In addition to the fact that the patch heals the screen, it also improves the performance of the device and increases the time battery life. Full list updates and fixes are not disclosed, but judging by the size (about 280 MB), there are quite a lot of them.
iOS 11 update installation failure can occur on any device that supports the latest version of the system. If an error occurs, there is no need to panic - try installing the update again after a while.
Error correction
Why wait before trying to install an update again? The fact is that immediately after the release of the update, a large number of users begin to download it. This can cause crashes on Apple servers. Crashes can occur some time after the release of the update, so you should always give the system a second chance. Therefore, when an error message appears, click "Close", wait a couple of hours and try downloading iOS 11 again.
- Open settings.
- Go to the "Basic" section.
- Click "Software Update" and start searching for updates available for installation.
If you get the error message again when you try to update the system again, follow these steps:
If the update cannot even be downloaded, check the device's memory. There may not be enough space for iOS 11, so you will have to get rid of unnecessary content: photos, videos, applications.
Installing an update in iTunes
If the failure to install the system update to iOS 11 continues to appear after performing the above steps, refuse to download the update over the air. Update the system via iTunes. In order to avoid any problems when updating via iTunes (for example, an eternal reboot), the following conditions must be met:
- the device supports the latest firmware version;
- have a stable internet connection;
- jailbreak procedure was not carried out, that is installed system not hacked.
To make sure your device is compatible with iOS 11, please see the list of supported models. If you have not found your phone or tablet, then there is no point in trying to install the latest version of the system from Apple.
What to do before starting the update:
After such a long preparation, you can start updating the device through iTunes. Click "Update" and wait for the procedure to complete. iTunes will download and install the latest firmware on its own.
If iTunes is unable to download and install the update, free it from this work. Download the iOS 11 firmware file from a trusted source - for example, w3bsit3-dns.com website. To select a file, hold down the Shift key and click the Update button in iTunes. An explorer will appear through which you can specify the path to the firmware.
After a successful update, the system will prompt you to restore the data. Choose to return data from a copy to iCloud or to iTunes, depending on where you saved the last backup. Click "Restore from a copy" and do not turn off the device until the procedure is completed.
Updating a jailbreak device
What should I do if my device has been jailbroken? About the same, but with minor changes. You will need latest version iTunes and free place, but before updating, you must remove all applications from alternative stores and reset to factory settings. For this:
- Turn off Find My iPhone in iCloud settings.
- Connect your phone to PC, make a backup copy.
- Click Restore.
The restore process will delete all data from the device's memory and automatically update the system to the latest supported version. The jailbreak will be lost, but you will get iOS 11.
Hi all! Every year, Apple updates operating system for their mobile devices- This is good. And every year she fails to do it without mistakes - this is bad. And although iOS 11 was released quite recently (and at the time of this writing it is still in the preliminary beta testing stage), each user can install it and “feel” - what is so new that Apple has prepared for us?
True, both at the installation stage and during use, with the iOS 11 update on the iPhone and iPad, there may be various problems. Some of them are serious, some are simpler .... In general, we need to understand and correct all this disgrace. How? And I'll tell you now. Let's go quickly and decisively!
Some useful information:
- Be sure to back up all data - or .
Devices that can install iOS 11
Not all gadgets support the new Apple operating system, the update is available for:
| iPad | iPod | |
| iPad Pro 12.9 inch | The iPod Touch 6th generation | |
| iPad Pro 9.7 inch | ||
| iPhone 8 Plus | iPad Air 2 | |
| iPhone 7 Plus | iPad Air | |
| iPad 4 | ||
| iPad mini 4 | ||
| iPhone 6S Plus | iPad mini 3 | |
| iPad mini 2 | ||
| iPhone 6 Plus | ||
If you did not find a mention of your device in the table, then, unfortunately, iOS 11 is not available for you.
"Check for iOS 11 updates failed" error
So, you have not yet installed the firmware itself (you just expressed a desire) - the problems are already at the very beginning. And they are that:
An error occurred while checking for a software update.
It turns out that the iPhone or iPad is not found new firmware(although it exists!). How to fix it?
- Check internet connection. Use another wifi network For loading.
- If it's a beta version, then check for an appropriate profile. If the final - the absence of any profiles.
- Try updating with iTunes.
You also need to remember that at the time of the release of the firmware, a huge number of people are trying to download new version software. Apple's servers do not withstand and failures in their work () are possible. In this case, we can do nothing - we can only wait.
Update download error
So, the iPhone or iPad "saw" iOS 11 and started downloading it. However, here we may be in for a surprise in the form of an update download error.
What are the reasons for such behavior?
- Not enough memory on the device. If the download occurs "over the air", then you need to free up space for the software installation file. Don't want to delete anything? Use iTunes.
- Unstable or weak Internet connection - breaks during download.
- The notorious overload of Apple servers. We wait a while and try again.
Do not want to wait until the failures pass? You can always "deceive" Apple and download the firmware from third-party resources (for example, w3bsit3-dns.com), and then "slip" it into iTunes. how to do it.
iOS 11 won't install
So, we still uploaded the new version of the software and everything is ready for installation. We begin to install and ... there are two options:
What can be done?
- Hard reboot the device.
- Check the battery charge - it should be more than 50%.
- Again, pay attention to the Internet connection.
Nothing helps? Everything is frozen and the bar does not move for a long time? and updated through iTunes - this is the only way to "revive" the device.
Update to iOS 11 via iTunes - Restore Failed
This error is especially relevant for those who constantly use beta software. So, when you try to "roll back" to stable version firmware via iTunes, you may encounter the fact that the iPhone or iPad "hangs on a string" and the recovery will fail.
What to do?
- Put the device into DFU mode.
- Download previous version firmware (if you have the 2nd beta installed, download the 1st one).
- Connect to iTunes, hold down the Shift key (for Windows) or Alt (for Mac) and click the "Restore" button.
- Select the downloaded firmware.
After installation, connect to iTunes again and restore the device in the usual way.
Perhaps that is all for now. Since iOS 11 is currently in the testing phase, it makes no sense to consider "glitches and bugs" in the work of the iPhone or iPad - there are too many of them. But if they remain after the release of the final version, I will supplement this article.
P.S. Be sure to write in the comments about the errors that you encountered - we will try to figure it out and find a suitable solution!
P.S.S. The secret way to get rid of all malfunctions - put "likes" and click on the buttons social networks. Worth a try!:)
Loading...