Wusa exe offline windows update installer. Manual update of Windows Update Client

Some users 7 Windows versions faced with the problems of the standard Update Center operating system. Windows 7 searches endlessly for updates, fails to download them, and keeps looking for more.

Such a problem can cause a lot of trouble. Firstly, the latest patches will not be installed on your computer, which can reduce work efficiency OS. Secondly, while the search is on, processor and physical memory heavily loaded. This may not be very noticeable on powerful PCs, but on “weak” ones it is very unpleasant. This article describes what to do if Windows Update 7 cannot complete the search for updates.

Setting up automatic search

Firstly, needs to be turned off completely. windows update , loading the operating system, as it goes on indefinitely. Subsequently, you can fix the problem and activate it back, if you like. But even without Windows updates still works stable. Many users disable them on purpose and experience no problems.

You will need to do the following:

After that follows to restart a computer to stop searching. Now your system will not try to look for new updates. If you need to enable this feature, you can do it in the same menu.

Stopping the service

In some cases, the method described above may not work. For example, when you try to reboot, the computer will take a long time to download and install some kind of patch. And after turning it off and on manually, all settings will return to their original state. And accordingly, the endless search for Windows 7 updates will begin again. To fix a similar problem, you need to completely disable the service in charge of work Update Center.

After these steps, the search for updates will be completed. To run it, you need to reset the service configurations to their original state.

In some cases, stopping the service and restarting it may solve the problem. Try this before resorting to more complicated methods if the computer is looking for new patches for a long time.

Correcting errors in system files

Often these problems result from damage to important system files . This may occur as a result system failures, actions of virus programs, incorrect installation of previous updates and so on.

On Windows there is special utility , with which you can automatically find and fix similar errors. It does not have a graphical interface, so to work with it, users need to run the system command line.

This is done in the following way:

If you want to copy this line, you must use the context menu by clicking right click mouse inside the window. The Ctrl + V combination in the console does not work.

After that Windows will scan all system files. All found errors will be corrected. After that, you should restart your computer and start searching for updates again. If the process is still too slow- needs to be searched other ways to solve the problem.

Microsoft released special update for their operating systems, fixing Windows Update, which is endlessly looking for updates. The download links are on the official website of the developer, so you can download the patch without resorting to the services Update Center.

For owners 32-bit version Windows - https://www.microsoft.com/en-us/download/details.aspx?id=49542
For Windows with 64 bit architecture - https://www.microsoft.com/en-us/download/details.aspx?id=49540

You need choose the interface language of your OS and click on the red Download button. Further simply run the downloaded file, wait for the installation to finish and restart your computer. In most cases, this patch solves all the problems that arise.

Updates KB3020369 and KB3172605

If the previous solution did not help, then you should update the seven by installing two more updates, restarting the computer between their installations. This method was suggested by several of our readers at once and it really helps a lot.

Troubleshooter from Microsoft

Another way to solve the problem is to use the Microsoft troubleshooting tool. Its action is somewhat similar to "sfc / scannow", with the difference that it was created specifically for Update Center and can solve a much larger number of problems. Besides, she has GUI , which makes it easier for users who are not used to using the console.

Do the following:

Wait for the operating system scan to complete. If the utility detects any problems, it will notify you and automatically apply the fixes.

We hope this article helped eliminate the endless search for updates to the seventh version of Windows, significantly speeding up your computer and making it much more stable.

Method One - Restarting the Windows Update Service

If after the manipulation the problem remains, then proceed to the next solution.

Method two - a recommendation from Microsoft to solve the problem of a long search for updates

Open the menu Start, enter the text in the search bar there "Windows Update". An item of the same name will appear a little higher - click it.
In the Windows Update window, click on the inscription "Settings", which is located on the left side of the window.
In the settings block under the name Important updates select the item under the name from the drop-down menu "Don't check for updates..." and press the button OK, which is located at the bottom of this window.
Next, restart your computer.
After restarting the PC, you need to download updates in the form of files from the official website of Microsoft, the developer of Windows. After downloading, you need to run and install them.
Update options exist for both x86 bit Windows and x64. Download the ones that match the bit depth of your Windows 7. If you do not know the bit depth of your system, then the article will help you with this.

And here are the files themselves:
- For x64 (64 bits) Windows variant 7: Update file KB3020369 and KB3172605
- For x86 (32 bit) version of Windows 7: update file KB3020369 and KB3172605
Install the update with the alphanumeric index KB3020369 first, and after KB3172605.

Note: Don't worry if an error pops up when installing any of the above updates, it just means that it was installed earlier.

After the updates are installed, restart your computer again.
Now you need to repeat the first step and the second step of this guide, and then you need to enable the download and installation of updates. To do this, in the update settings window in the block under the name Important updates must be selected from the drop-down menu "Install updates automatically" and press OK to save the setting.
It remains only to wait for the download and installation of updates. If earlier the system was only reinstalled, then it is necessary to wait a long time - up to a day.

If, after the lapse of time, nothing has changed and the problem with the “eternal” search has not disappeared, then proceed to the next solution.

Method three - use the standalone update installer for Windows 7

This method is based on installing updates from a specially created package of official updates for Windows 7.

A third-party developer downloaded most of the updates from the official Microsoft website and made a special installer that, at startup, checks the system for missing updates and installs them.

After that, the problem with the constant search for updates in Windows 7 will be resolved, all subsequent updates will be installed through Windows Update, as it was before.

As we can see, there are many effective solutions, one of which will definitely return performance. Windows Update on your Windows 7 installation.

UltraVNC is a great remote assistance solution. The connection is made directly to the Windows console session, i.e. you always see on the screen what the user sees remote computer. Using the repeater utility (repeater), you can configure access to servers in local network, located behind the NAT router, while on the router you need to forward only one port. It can also be used for presentations. The program is free. UltraVNC installation. First you need to download the distribution kit, drivers and repeater (if needed).
Official website of UltraVNC: http://www.uvnc.com/
Download section: http://www.uvnc.com/download/
At the time of writing latest version- 1.0.8.2 . You can only download the client. Both win32 and x64 versions are available.
Latest drivers from...

Setting up forwarding in IIS in pictures

Setting up forwarding in IIS in pictures Download the URL Rewrite module and install itGo to IIS. Select the desired site. On the right, select " URL rewriting"In the window that opens, press RMB and select the item:" "In the window that opens, press RMB and select" Add an override schema". Enter a name for the scheme (any). The override scheme window will open. Next, RMB =>" Add Mapping Entry" and enter the source address and the destination address. Note: Source address must be relative and destination must be absolute Back to the window View Override Schemas". press RMB and select the item" Add rules"Choosing a Template" Rule with override schema"Install Rule action selection: Redirect. Select Override Schema: The schema you just created. We press OK. All is ready.

GLPI settings and initial setup

You must first install Lamp-server. Since Ubuntu 7.04, LAMP can be installed using Tasksel. To do this, you need to run the command: sudo tasksel install lamp-serverDuring installation, a password for the MySQL database administrator will be requested. Do not forget to install the php5-ldap php5-imap modules. sudo apt-get install php5-ldap php5-imapLdap module will start working immediately after restarting Apache ( sudo/etc/init.d/apache2 restart), but the imap module is disabled by default. Therefore, it must be enabled with the php5enmod imap command. I recommend that you also put Installing from a repositorysudo apt-get install glpi During installation, the database will be configured ( will ask for the MySQL administrator password and ask you to set a password for the glpi user).After that, a window will appear asking you to enter through the browser at http://host_name/glpiAfter clicking on this link, the glpi web interface will open. For the first login, use: Login: glpiPassword: glpi Manual installation(not tested on newer versions) For N…

For all systems Windows families installation of update packages. And the seventh version, although it is considered the most stable of all currently existing ones, was no exception. However, it also sets the search first. Updating Windows 7 can take an infinitely long time for various reasons. Consider all aspects related to this. The solutions proposed below help to eliminate an unpleasant situation in 99% of cases. And all of them are simple enough to be used by even the most inexperienced user in matters of system configuration. But first things first.

Why is the search for updates endless (Windows 7)?

Let's start the consideration of the main issue by finding out the causes of violations in the operation of the update service. Among the main root causes, most experts point to malfunctions in the Update Center itself and the system services that are involved in this process.

Now situations with virus exposure will not be considered, since each user must take care of protecting his computer himself. Consider how to eliminate the infinite 7 on your own. There are at least three ways to do this.

Windows 7: Infinite Update. Diagnostics of the "Update Center" by means of the system

Because the endless process search for update packages is associated specifically with the "Center", it is logical to assume that this service needs to be checked for operability.

If use software the system itself, the problem that Windows 7 updates are endless is eliminated through the built-in debugger. You can call it from the Run console (Win + R) by entering the line msdt / id WindowsUpdateDiagnostic, after which a window will appear in which you should use the link to additional settings. In the new window, first you need to check the box opposite the permission to automatically apply fixes, click on the link to run as administrator and click the continue button. After that, it remains to wait for the end of the diagnostic process, go to the "Update Center" and set manual search followed by installation confirmation.

Diagnosing problems with a special utility

If someone does not like the method proposed above, or just too lazy to dig into the debugger settings, you can go the other way.

From the official Microsoft website or any other trusted resource, download small program called WindowsUpdateDiagnostic. By the way, it is also suitable for more recent versions of the system.

After the first start of the utility, select the update center line and activate the troubleshooting. They will be displayed in the results, which may indicate problems with the drivers or with the hard drive. Please note that the program does not fix the problem in Windows 7. Infinite Update is only defined and indicated by it possible reason. So you have to install drivers or check HDD himself.

Drivers can be installed from the "Device Manager", but this is too long a process. It is better to use automated tools like driver booster With automatic search and integration of drivers into the system.

Download standalone update package

If the problem persists, you still have to pay attention to the Windows 7 Update Center again. The endless search can be fixed by another method.

To do this, you need to download the so-called standalone package with the number KB3102810 to your computer, choosing the appropriate bit depth for the system (32 or 64 bits) when downloading. You can download the package, again, either on the Microsoft website or on another resource. But that's only half the battle.

Stopping the Update Center service

In Windows 7, an endless update can only be fixed if the service itself, which is responsible for finding and installing updates, is deactivated. You can try to complete active process in the "Task Manager", but, as a rule, this will lead to nothing, and the service will be activated again.

Her complete shutdown can only be done in the corresponding section of the services, which is accessed through the services.msc command, entered in the corresponding Run menu bar.

Here you need to find the line of the update center, through the right click call context menu and select the stop command.

In order not to rummage through the services directory, you can use the command line with administrator rights (cmd in the Run console), where you should write the net stop wuauserv combination.

Package installation and manual search for updates

Now the most basic thing is installing the standalone package. We launch it with the standard double click on the downloaded file and agree to the installation offer.

After that, the installation process starts. When finished, you will need to restart your computer. If errors occurred during the process of integrating the package into the system, then something was done wrong at the stage of disabling the update service. Repeat the above steps and run the installer again. In addition, it is possible that the standalone package installation file itself was not completely downloaded (this also happens). In this case, as is already clear, you need to repeat its download or download from another source.

When the package is successfully installed and the system is rebooted, you should go to the "Update Center" and use the manual search for updates.

If nothing helped

Finally, if none of the above helps, you can remove the endless update in Windows 7 by installing the UpdatePack 7 Live service pack (build version 07/31/2016).

Upon completion of its integration into the system, the search for updates will automatically start. It is very likely that a lot of them will be found (in some cases their number can reach two hundred or more). You should not be surprised, because, in fact, after installing the package, the user gets an almost “clean” system in which no updates were installed.

Note: you can install this pack only on top of the existing Service Pack 1. If it is not there, the updater will not be installed. The way out is to install SP1 (at least even from the official Microsoft website).

Conclusion

As you can see, there is nothing particularly critical in the considered problem. It is eliminated quite simply by all the proposed methods. It goes without saying that such solutions only apply to a system that has not been found to have potentially harmful or active threats that could disrupt or block the Windows Update service. In all other cases, such solutions help. In the matter of preferences, the user himself decides how to proceed, although you can use complex diagnostics first, and only then install a standalone package or service pack. Which one to choose? Actually, absolutely no difference. Yes, and the opinions of users about installing either one or the other update diverge, so you will have to decide for yourself.

Hi all. Alexander Glebov is in touch with you. In my next article, I tell you how to remove the endless search for Windows 7 updates. The problem is quite relevant, and if your search for updates slider is constantly spinning and does not find anything, then read on...

Endless search for windows 7 updates - the essence of the problem

Very often in my practice I encounter the problem that in windows 7 the search for updates takes an infinitely long time. I remember leaving the laptop for a day, the slider ran, ran, but did not find any updates.

Remarkably, this problem can appear both in x64 Windows 7 and in x86 Windows 7. I also noticed that on powerful computers (Core i7, Core i5) there are still hours after 4 updates. But on a netbook Asus Eee PC never found me. Okay, let's move on to the solution.

Windows 7 searches for updates indefinitely - step by step solution

Googling, I found out that Microsoft is aware of this problem, and released a special patch, and in order to eliminate the infinitely long search for windows 7 updates, you need to install it, for this we will perform the following steps:

source/bit depth	windows 7 x86	windows 7 x64
Microsoft.com	download	download
Yandex.Disk	download	download

If all of the above did not help

So, it happens that the method described above does not help, in which case you can try installing the following updates - kb3020369 and kb3172605 (thanks to user Nikolay).

source/bit depth	windows 7 x86	windows 7 x64
Microsoft.com