Prices: Without physical activity, with physical activity for 15 months, with physical activity for 36 months.
Tape width: 57 mm
Review:
This model does not support the requirements of the law FZ-54. To upgrade the fiscal registrar, it is not necessary to replace it. Created for this revision kit FR Shtrikh-M.
Contents of delivery:
- Fiscal registrar Shtrikh-M FRK
- External power supply
- PS-232 or RS-USB cable
- 1 roll of receipt tape 80mm
- driver CD
- passport, operating instructions, tax inspector's instructions, version passport
The package includes driver bar m frk (download) and instructions for connecting Stroke m frk to 1s. (download). Also, the developer of the fiscal registrar distributes for free the cash program "Shtrikh-M: Cashier's workplace" (download). The trading equipment of this company has proven itself well in the Russian market.
Appearance and convenience
Fiscal registrar Shtrikh M FR K is a cash register designed to be connected to a computer in on-line mode. Another product from the Shtrikh-M company, designed to replace the obsolete, but still very popular fiscal registrar Shtrikh FR-K. KKM Shtrikh M FR-K has a more compact case, an updated processor board and an improved operation algorithm.
Stroke M PRK is perhaps the most popular fiscal registrar in Russia due to the company's long presence in our market and good technical support. Recently, it began to lose ground because of its high cost in front of new competitors.
Available in three colors: white, gray and black, but the top cover always remains black.
Display
The display consists of 2 LEDs:
- red - indicates an error
- green - indicates that the fiscal registrar is connected to the 220 volt network
Nearby there is a button for pulling a check tape.
Connecting to devices
It has two ports for connecting external devices - one for a computer - LPT port, the other for connecting a cash drawer or a call to the kitchen. Unfortunately, there is no USB port, but a USB-LPT adapter may be included in the package. There have been cases when the fiscal registrar does not work well via the USB interface, therefore, if possible, Shtrikh-M PRK is connected via the COM port.
You can buy FR Shtrikh-M PRK, the price of which, although a little more expensive than analogues, but the difference pays off due to the reliability of the cash register, and you can order the connection of a fiscal registrar to 1C accounting (or another program) in our online store. The service engineers of our TsTO will connect the cash register to the computer and train the personnel on working with cash registers. 1C and Shtrikh-M PRK work perfectly together in one of the largest retail chains in Russia.
Printer
Over time, pieces of paper are clogged under the knife of the automatic cutter of the receipt tape.
Unreliable check tape cutter, often sticks. You have to scroll the knife roller manually; for this, a technological hole is provided under the top cover of the printer.
If paper is jammed, do not try to pull it out with foreign objects - you can easily damage the teeth of the metal paper cutter.
Types of basic cash receipts and reports
Bar M FR K can print logos on cash receipts.
| cash receipt | Morning X - report without cancellation | Evening Z report with cancellation. |
Food
Impression
Cons of a fiscal registrar
- unreliable knife cuts cash receipts
- weak technical characteristics
- lack of USB port
Applications
- retail and wholesale
Fiscal registrar / printer settings before connecting to a computer
- download, unpack and install the driver for working with the fiscal registrar
- connect the power supply to the fiscal registrar
- connect the computer communication cable (COM or USB)
- turn on the power switch on the fiscal registrar
- run the "Test Driver" program
Start → All Programs → SHTRIH-M → Driver FR 4.10 → Driver Test FR 4.10
In the running driver, click the button: "setting properties"
In the pop-up window, click the "Search for equipment" button
click "Start"
After the driver finds the equipment, DOUBLE CLICK WITH THE MOUSE on the found fiscal registrar Bar-M-FR-K:
Press the "test connection" button, the name and serial number of your DVR will appear, then press the "OK" button.
Driver installation
- IMPORTANT! When connecting a fiscal registrar to Windows 7, additional drivers are required (you can download them right here) - Drivers for Shtrikh -FR-K.
- Please note that for the correct operation of the device, you need to install them 2 times!
HATCH M FR K connection to 1C v8.1/8.2
Typical configuration "Retail 1.0"
1) Install the SHTRIKH-M driver from the disk that comes with the FR.
2) It is necessary to rewrite from the folder ... Program Files BAR-M Driver FR 4.10 all files with *.dll extension to the directory of the 1C platform (..Program Files1Сv81in)
3)Register the DrvFR.dll file in the system registry using the regsvr32 "[file path]DrvFR.dll" command (if for some reason registration did not occur automatically due to installation).
4) Connect FR to PC.
5) Run 1C: Enterprise.
6) Open the menu "Service" -> "Trade equipment" -> "Assistant for connecting and setting up trade equipment".
7) In the form window, select "Fiscal registrars", click add.
8) In the form of the equipment directory that opens, again click add, in the new window select processing ShtrihMFiscalPrinters_v2.epf , model, write the name, then the "write" button and "ok" select this device.
9) Select the checkout, press the parameters. Select the COM port, speed, click "ok".
10) The device is connected, you can start working :)
Shtrikh cash desks are upgraded to the "online" version using the upgrade kit, which includes:
- Modernization device (UM) - a special board that connects to the main board of the cash register and takes over the control of the cash register. A fiscal drive and one of the data transmission channels in the OFD (Ethernet, RNDIS, Wi-Fi) are connected to the UM. UM is universal and suitable for all Barcode CCPs.
- Passport for a modernized CCP;
- Nameplate with serial number and name of CCP;
- Cable for interfacing UM with the main board of CCP;
- Cables for connecting the UM to the Internet (Ethernet or USB).
- Computer (laptop);
- AVR programmer;
- Upgrade kit for Shtrikh-M cash registers (photo above);
- fiscal accumulator;
- COM cable for Shtrikh-FR-K (with adapter cable COM-USB);
- USB cable (for connecting the programmer to a computer);
- Screwdrivers (Phillips and flat);
- Drill with a drill for metal (d = 10 mm);
- Program FR driver test Hatch;
- Program Atmel Studio 7.0;
- Firmware file for the Shtrikh-FR-K motherboard;
Note 1. After modernization, CCP will be named Bar-FR-01F(instead of Shtrikh-FR-K) and a new serial number. Under this name and number, the CCP will be listed in the register of the tax service upon registration.
Note 2. Before starting the upgrade, you need to make sure that the cash register is deregistered with the tax authorities. To deregister old cash registers with the tax office, it is necessary to print fiscal reports for the time of operation of the cash register and submit it to the tax service along with an application for deregistration. After the upgrade, this will no longer be possible.
Note 3. Before starting the upgrade, you need to make sure that the Shtrikh-FR-K fiscal registrar is in good working order and functions normally. To do this, you need to connect it to a computer and through the program FR driver test Barcode check its performance.
The procedure for upgrading Shtrikh-FR-K:
1. Disconnect the power supply and all cables connected to the cash register. Remove the two top covers.
2. Pull out the receipt tape and disconnect the transaction log rewinder (reel on which paper is wound) from the second compartment. 
3. Unscrew the 4 screws that fasten the plastic case of the cash register to the metal base. 
4. Lay the cash register on its side, use a flat screwdriver to bend the latches on the side of the case and disconnect the upper plastic case of the machine.
5. Disconnect the ECLZ and remove the flexible drive from the second printer. 
6. Use a Phillips screwdriver to unscrew the rewinder gear plate.
7. Loosen the two screws securing the second printer. It is no longer needed for the operation of the cash register.
Note. Do not throw away the removed "signet". It will be needed for replacement, in case of breakage of the first "signet".
8. Loosen the two screws in the bottom case cover and detach the bottom cover. 
9. Disconnect all cables from the system board.
10. Unscrew the two screws securing the fiscal memory unit and disconnect it.
11. Set the system board aside. Take a drill and drill a hole in the metal base of the cash register, approximately in the place shown in the picture. This hole is required for the Ethernet cable.
Advice. It is better to first drill a hole with a small diameter drill, and then widen it with a 10 mm drill.
12. The walls of the hole can be cleaned with sandpaper to smooth out burrs.
13. Make sure the power switch on the CCP board is turned off. Connect the power supply to the board and plug the plug into the network. Connect the programmer to the CCP board, and connect the programmer itself to the computer using a USB cable.
Important! The connectors for connecting the programmer and the fiscal memory unit are the same. They can be easily confused. The connector for the programmer is located next to the COM port connector (shown in red in the figure).
After you have made sure that the programmer is connected to the correct connector, turn on the power on the board using the switch.
14. Run the program on the computer Atmel Studio 7.0. In the main menu of the program, select " Device Programming".
15. Specify the settings as shown in the photo, and then press the buttons one by one. apply" (one), " read"(2) and second button" read"(3). The program should read the device signature and show the output voltage. If this did not happen, check the connection of the programmer to the CCP motherboard. 
16. On the left menu, select " Memories". In the program window, select the location of the firmware file (1) and click the " program" (2).
17. The process of flashing the motherboard will start. The green status bar at the bottom of the program will inform you about the progress of the operation.
18. In case of successful completion of the firmware, on the left, at the bottom of the program, messages will appear:
- Programming Flash...OK
- Programming verifying...OK
19. After flashing the microcontroller, you additionally need to flash the fuses. To do this, select "" from the menu on the left. Fuses".
Uncheck the box " M103C", mark the rest of the items as in the photo below. To start the firmware, press the button" program".
After the message " Verify registers...OK"- turn off the power of the board using the switch and close the program.
20. Install the fiscal accumulator in the retrofit device.
21. Attach the upgrade device to the site where the ECLZ used to be. Insert the Ethernet cable into the drilled hole through the safety sleeve. Connect the Ethernet cable and interface cable to the upgrade device.
Important! Make sure that the cables from the PA do not pass over the hole where the case fixing screw is screwed. Otherwise, some wire may be damaged.
22. Connect the other end of the interface cable from the PA to the connector on the system board (highlighted in red in the figure).
Note. The interface cable included with the upgrade kit may be short. In our case, we had to increase the cable.
23. Connect the remaining cables to the connectors on the system board.
24. Next, it is recommended to check the operation of the cash register. To do this, without assembling the body of the device, insert paper into the printer, connect the power supply to the device, and connect the device to the computer using a COM cable. After that, turn on the power on the fiscal registrar.
25. Run the program on your computer " FR driver test". At the bottom of the program window, click the " Setting properties".
26. In the window that appears, click the " Equipment search".
27. Press the " To begin". The registrar must decide under the name " SHTRIH-FR-01F". Click on the line with the name twice with the left mouse button.
28. When you click on the " Check connection" you can see that the recorder does not have a serial number. Press the button " OK".
29. To enter the serial number, select " Service". Enter the serial number (located in the passport of the cash register or on the nameplate) and press the button " burn".
30. For the stable operation of the cash register, it is recommended to update the firmware of the upgrade device, because at the time of the upgrade it could already be outdated. To check the UM software version, select " State"and press the button" Long request".
31.
Turn off the recorder and pull out the paper. Assemble the case and tighten all screws in place. Fiscal registrar under a new name " Bar-FR-01F"Ready to go online.
Р.S.: Do not forget to stick a new nameplate with the KKT serial number.
SHTRIKH-M-FR-K is a modern fiscal registrar from a leading manufacturer of the cash market with a functional filling for comprehensive use: for working in retail environments (from mini convenience stores to supermarkets), catering establishments, gas stations, hotels, i.e. for all areas of trade where reliable automation tools and a high level of productivity are required. ct center will help set up the work " HATCH-M-FR-K».
DISTINCTIVE FEATURES OF SHTRIH-M-FR-K
- High print performance - up to 150 mm/s
- Guillotine cutter
- Possibility of fast loading of a check tape
- Quick access to printer units and ECLZ replacement
- Connection to a personal computer via RS232 or USB interfaces
- Thoughtful modern design
The single-station fiscal registrar from the first to the last detail was produced by the team of the company "SHTRIKH-M": the device has an elegant and finished external design, proposed by the specialists of the internal design studio of the company. The FR, with its sharp, straight lines of the body structure and smooth curves of the transparent protective cover, will become a key element of the operator-cashier's workplace and will perfectly fit both into an office interior and a high-tech store.
Reliability for many years
Printing mechanism fiscal registrar Stroke m fr k was developed by the company's engineers, taking into account the extensive experience of our technical specialists in this field. A sufficient margin of safety has been incorporated into the design of the printer's print mechanism, even for the most difficult operating conditions in hypermarkets and supermarkets. A high quality thermal head from ROHM (made in Japan) with a resource of 50 kilometers provides excellent receipt printing even at speeds of about 150 mm/sec. Durable plastic housing is resistant to mechanical stress, ensures the durability of the device, and thoughtful design is simply pleasing to the eye. Auto-cutting block (made in Taiwan) with a guillotine-type knife allows you to perform both full and partial check cutting operations. Moreover, even the ingress of foreign objects, for example, change coins, into the cutting block will not provoke its breakage: the electronics will automatically block the knife.
Ribbon width and receipt format: wide range of available consumables and freedom of choice
Fiscalnik SHTRIH-M-FR-K allows you to print not only on a wide 80 mm tape (up to 57 characters per line), forming fairly representative and informative receipts, but also on the more common 57 mm tape, thus providing an opportunity to save on consumables. A wide range of available fonts (multiple kegels, italics or bold), built-in check format tables, and printing of logo graphics give you the ability to customize your check design to your liking.
Replacing the Ribbon Without a Long Stoppage of Printing
In the fiscal registrar SHTRIH-M-FR-K the function of fast loading of the receipt tape is activated: it is only necessary to insert a new one instead of the finished roll and close the protective cover - it takes less than 5 seconds!
Ease of daily and scheduled maintenance
Initially created as a fiscal registrar, SHTRIH-M-FR-K is extremely easy to maintain. To get to the fiscal memory or replace the ECLZ, you need to unscrew only two screws and remove the protective plastic case. Reliability, short disassembly-assembly time and affordable components and parts are additional profit for service centers and significant savings for end users!
Universality of the fiscal registrar bar m fr k
Fiscal registrar SHTRIKH-M FR-K is multi-interface, that is, it can be connected to a personal computer both via RS232 and via USB. This allows you to free up COM ports that are scarce today for another peripheral device.
One of the inalienable advantages of the device is several available mounting options: it can be mounted both horizontally and, to save space on the cash settlement unit, be fixed with fixing screws in a vertical position and at the required angle of inclination.
For manual check cutting, the fiscal registrar is equipped with a comb.
Compatibility
In ShTRIKH M FR K, as well as in the entire line of fiscal registrars from the manufacturer "SHTRIKH-M", data exchange with a personal computer is implemented on the basis of a single protocol and software driver.
KKM bar m fr k performs the following functions:
- Sale, sale return, purchase, purchase return
- Sale for cash
- Sale on credit / for non-cash. payment (up to three types of payment)
- Multiplying the price by the total quantity of the item
- Calculation of interest-free surcharge and discount
- Accounting and control of cash amounts
- Subtotal Calculation
- Control of totals
- Calculating the total change
- Reversal of cash transactions (partially or completely) in an open check
- Calculation of the percentage markup and discounts for the entire check
- Check cancellation
- Payment of cash amounts from the cash desk that are not related to the purchase
- Depositing cash into the cashier
- Allocation of taxes at fixed tax rates
- Repeating the printing operation of the last fiscal receipt
Center kt company represents almost all well-known brands of barcoding equipment, if you are interested in a product that was not found on the site, you can contact our phone managers and they will help you choose a similar product or recommend a partner where you can buy it.
Loading...