Program for transferring the system to Samsung ssd. Transferring the system to an SSD without reinstalling - the best ways

Transferring the system to SSD is effective method computer organization.

Please note, depending on Windows versions and the parameters of the purchased flash drive, transfer methods may vary.

What data can be transferred to SSD

Storing the operating system on an SSD not only speeds up its operation, but also improves the response of other programs and files that are stored on the disk.

The user can transfer the following types of data to a flash drive:

• Operating system . It is added to the SSD with all ready-made drivers and settings. In essence, a duplicate of it is created, which was previously stored on the HDD;
• Programs – choose yourself which applications you want to add to and which you want to leave on (HDD). We advise you to leave extensive programs for video editing and software development/testing on your computer - this way they will work many times faster;
• User files . This can be any of your documents, photos, music, videos and other types of data.

Components to move

To add Windows in use to the SSD, the following objects are required:

If you only work with OS resources, you won't need to install third party utility.

Computer requirements

Before you perform any OS migration steps, make sure that your device meets all the minimum requirements that allow the utility to interact with the SSD and transfer large amounts of data.

The minimum requirements are shown in the following table:

You can compare your computer's settings with the specifications listed above using the About window.

It displays correct data about the main hardware and software components of the device:

We use the built-in capabilities of Windows

Follow the instructions to transfer the operating system to a flash device:

• Open the window "Disk Management". To do this, enter the command diskmgmt.msc in the Run window and confirm the action;

Fig.3 - launching disk management tool

• Now you need to reduce the size of the OS on the disk. You can perform this action using the Shrink Volume function. All data will remain in the same state, only the space occupied on the HDD will decrease. Right-click on the “System” section, and then on “Shrink Volume”;

Fig. 4 – Volume compression

• After successfully reducing the size of the OS, a free partition will appear in the disk layout. This means that everything was done correctly;
• Connect the drive to your computer and reboot the window "Disk Management";
• Now click on the “Wizard” tab and select “OS SSD Transfer” from the list;

Fig.5 - “Master” tab

• The standard utility for . Click on the "Next" button to go to the settings;
• Click on the item "Unoccupied Space" and go to the next window;

Fig.6 – disk space selection

• Now you can independently change the size of the future disk or leave all parameters unchanged;

Fig.7 - changing the disk partition size

• After clicking the “Next” button, the wizard will begin moving the system. After completing the action, you can turn off the computer and the next time you boot, select the OS that is located on the SSD.

Windows will also remain on the hard drive. You can remove it or use it as backup copy when you need to restore the system.

Fig. 8 - the result of a successful Windows move

Don't forget to click on the "Apply" button in the upper left part of the window "Disk Management", otherwise all changes made will not be saved.

If you experience any error windows or freezes during the transfer, you should reset the settings, restart your PC, and try the transfer again.

Fig.9 - applying changes

Instructions for SSD from Samsung

The company has released an official utility that allows you to quickly move the OS from hard drive to the purchased flash drive.

The utility is called Samsung Data Migration. You can download it for free from the company’s official website (section “Memory” - “SSD”) or using the disk that comes with the device.

The initial program window looks like this:

Fig. 10 – Samsung Data Migration utility window

Immediately after launching the utility, connect to computer SSD using the appropriate adapter. Click on the “Start” button.

Fig. 11 – analysis of a disk with an installed copy of Windows

After analysis, the program will automatically detect the SSD connected to the computer and display it on the screen:

Fig. 12 – reconciliation of the source and destination disk

If the space occupied by Windows on the HDD does not exceed the available space on the SSD, you can immediately begin the transfer by clicking on the “Start” button.

The automatic movement of all components will begin. The procedure can take from 30 minutes to 1.5 hours, depending on the version of Windows used.

Fig. 13 - successful system transfer

As a result, you will receive a success notification. Close the window and delete all Windows data from the HDD.

The advantage of using Samsung Data Migration is simple interface. The program will do all the work for you and minimize the likelihood of errors or bugs appearing after transferring the OS.

What to do if during the analysis stage you find that there is not enough space for the OS on the SSD? In this case, you need to clean Windows of unused data and applications.

You can do this directly in the Samsung Data Migration utility window.

Fig. 14 - Error. Not enough SSD space

After the error text appears (highlighted in red), click on the “Next” button and in a new window, delete all library files that are cluttering the system.

Clean the OS until the text appears in the main utility window "Ready to clone to SSD".

Fig. 15 - successful cleaning of unnecessary files

Acronis True Image utility

Acroins is the most popular utility for transferring an OS to removable media. It recognizes all SSD brands. The application is supported by all versions of Windows, so there will be no compatibility problems.

Remember, you can only use the application if your PC hardware has a disk from the manufacturer Acronis.

If a component is missing, the utility will not start, and the user will be notified that it is impossible to work with the program.

Fig. 16 – main window of the Acroins application

To move the system, connect removable media to the computer and in the program window click on the tile "Disk cloning"-"Copying partitions".

In the window that opens, select auto mode movement. It is suitable for all tasks and copies data quickly.

Fig.17 - selection of cloning mode

All sections will be copied to . All data that was on the SSD before cloning will be deleted.

The disk itself will become bootable and can only be used to run the operating systems installed on it.

Fig. 18 – copying process

Seagate DiscWizard utility

The utility completely replicates the Acronis interface. It must be used if your PC has at least one HDD from the manufacturer Seagate.

To clone, you should follow the same steps as described in the previous paragraph of the article.

Fig. 19 – Seagate Disc Wizard main window

Changing bootloader configuration

After cloning the system, a copy of the OS will remain on the computer, and every time you boot, a window will appear with a boot selection. After the transfer, we recommend that you perform a number of actions:

• Without deleting the original copy from the HDD, test the operation of Windows on the HDD. There are times when the system starts to slow down and performance deteriorates. This happens extremely rarely and depends solely on the selected SSD. As long as the first copy is not deleted, you will always have the opportunity to return to using it and remove the OS from the SSD;
• Change your system bootloader settings.

The boot manager is a built-in component that helps your computer determine which installed operating system to run. You can also configure the startup order of hardware components.

Immediately after, the manager will show two systems with identical names - the original and the copied one.

In case of normal Windows operation on an SSD, you need to delete the version that remains on the computer’s hard drive. Follow the instructions:

• Restart your PC and run the version that was moved to the flash drive;
• Open ;
• Enter the command shown in the figure below, giving the OS copies on the SSD a unique name;

Fig.20 - command for renaming the bootloader component

• Now configure the dispatcher so that it always launches the new OS first. You can do this using the following command:

Fig.21 – automatic start cloned OS

• To delete old system, enter the following command (where ID is the number of the old copy of the OS in the bootloader list):

Fig. 22 - deleting the original copy of Windows

Bottom line

As you can see, to transfer the system to a removable flash drive, you just need to use a universal utility for duplicating components or perform the move yourself.

Don't forget to delete boot entry disk that is no longer in use. If this is not done, errors may occur when turning on the OS.

Users who have migrated their system to an SSD note increased computer performance and faster completion of complex tasks and processes.

The loading speed of the operating system increases by 2-3 times.

Thematic videos:

How to connect an SSD to a desktop computer. Transferring Windows from HDD to SSD

Correct connection of an SSD drive to a personal desktop computer. How to quickly transfer Windows OS from a hard disk drive (HDD) to a solid state drive (SSD). Practical advice, performance evaluation after replacement with SSD.

Laptop hard drive HDD SSD system transfer free

Laptop hard HDD drive SSD transfer systems + system cloning program

Moving your system to an SSD is an effective way to organize your computer. In addition, after purchasing a flash drive, you will not need to install the OS on it from scratch and configure all the drivers. Moving to disk already existing system will save time and free up your PC disk for storing other files.

Along with the transfer of Windows, absolutely all programs, games, settings and drivers that are already installed on the PC will be moved to the SSD. You can solve the problem in one of two ways:

• Using built-in OS functions;
• Using third party utilities.

Please note that depending on the version of Windows and the parameters of the purchased flash drive, transfer methods may vary.

What data can be transferred toSSD

Storing the operating system on an SSD not only speeds up its operation, but also improves the response of other programs and files that are stored on the disk. The user can transfer the following types of data to a flash drive:

• Operating system . It is added to the SSD with all ready-made drivers and settings. In essence, a duplicate of it is created, which was previously stored on the HDD;
• Programs – choose yourself which applications you want to add to the SSD and which you want to leave on the computer’s hard drive (HDD). We advise you to leave extensive programs for video editing and software development/testing on your computer - this way they will work many times faster;
• User files . This can be any of your documents, photos, music, videos and other types of data.

Components to move

To add Windows in use to the SSD, the following objects are required:

• Installed transfer utility;
• The SSD itself;
• Computer or laptop;
• An adapter of the SATA-USB type, with which external drive connects to PC.

If you only work with OS resources, you won't need to install a third-party utility to transfer.

Computer requirements

Before you perform any OS migration steps, make sure that your device meets all the minimum requirements that allow the utility to interact with the SSD and transfer large amounts of data. The minimum requirements are shown in the following table:

You can compare your computer's settings with the specifications listed above using the About window. It displays correct data about the main hardware and software components of the device:

Fig.2 – viewing window Windows settings and computer

We use the built-in capabilities of Windows

Follow the instructions to transfer the operating system to a flash device:

• Open the Disk Management window. To do this, enter the command diskmgmt.msc in the Run window and confirm the action;

Fig.3 - launching disk management tool

• Now you need to reduce the size of the OS on the disk. You can perform this action using the “Shrink Volume” function. All data will remain in the same state, only the space occupied on the HDD will decrease. Right-click on the “System” section and then on “Shrink Volume”;

Fig. 4 – Volume compression

• After successfully reducing the size of the OS, a free partition will appear in the disk layout. This means that everything was done correctly;
• Connect the drive to your computer and restart the Disk Management window;
• Now click on the “Wizard” tab and select “OS SSD Transfer” from the list;

Fig.5 - “Master” tab

• A standard utility for cloning the operating system will open. Click on the “Next” button to go to the settings;
• Click on the “Unallocated space” item and go to the next window;

Fig.6 – disk space selection

• Now you can independently change the size of the future disk or leave all parameters unchanged;

Fig.7 - changing the disk partition size

• After clicking the “Next” button, the wizard will begin moving the system. After completing the action, you can turn off the computer and the next time you boot, select the OS that is located on the SSD.

Windows will also remain on the hard drive. You can delete it or use it as a backup copy when you need to restore the system.

Fig. 8 - the result of a successful Windows move

Don't forget to click on the "Apply" button in the upper left part of the "Disk Management" window, otherwise all changes made will not be saved. If you experience any error windows or freezes during the transfer, you should reset the settings, restart your PC, and try the transfer again.

Fig.9 - applying changes

Instructions forSSD fromSamsung

Samsung has released an official utility that allows you to quickly move the OS from your hard drive to a purchased flash drive. The utility is called Samsung Data Migration. You can download it for free from the company’s official website (section “Memory” - “SSD”) or using the disk that comes with the device.

The initial program window looks like this:

Fig. 10 – Samsung Data Migration utility window

Immediately after launching the utility, connect the SSD to your computer using the appropriate adapter. Click on the “Start” button. Next, the application will automatically scan the HDD in use and display information about the remaining free space and sections of the media.

Fig. 11 – analysis of a disk with an installed copy of Windows

After analysis, the program will automatically detect the SSD connected to the computer and display it on the screen:

Fig. 12 – reconciliation of the source and destination disk

If the space occupied by Windows on the HDD does not exceed the available space on the SSD, you can immediately begin the transfer by clicking on the “Start” button. The automatic movement of all components will begin. The procedure can take from 30 minutes to 1.5 hours, depending on the version of Windows used.

Fig. 13 - successful system transfer

As a result, you will receive a notification that the operating system has been successfully cloned to the flash drive. Close the window and delete all Windows data from the HDD.

The advantage of using Samsung Data Migration is its simple interface. The program will do all the work for you and minimize the likelihood of errors or bugs appearing after transferring the OS.

What to do if during the analysis stage you find that there is not enough space for the OS on the SSD? In this case, you need to clean Windows of unused data and applications. You can do this directly in the Samsung Data Migration utility window.

Fig. 14 - Error. Not enough SSD space

After the error text appears (highlighted in red), click on the “Next” button and in a new window, delete all library files that are cluttering the system. Clean the OS until the text “Ready to clone to SSD” appears in the main utility window.

Fig. 15 - successful cleaning of unnecessary files

Acronis True Image utility

Fig. 16 – main window of the Acroins application

To move the system, connect the removable drive to the computer and in the program window, click on the “Disk cloning” - “Copy partitions” tile. In the window that opens, select automatic movement mode. It is suitable for all tasks and copies data quickly.

Fig.17 - selection of cloning mode

All partitions will be copied to the flash drive. All data that was on the SSD before cloning will be deleted. The disk itself will become bootable and can only be used to run the operating systems installed on it.

Fig. 18 – copying process

Seagate DiscWizard utility

The utility completely replicates the Acronis interface. It must be used if your PC has at least one hard drive from the manufacturer Seagate. To clone, you should follow the same steps as described in the previous paragraph of the article.

Fig. 19 – Seagate Disc Wizard main window

Changing bootloader configuration

After cloning the system, a copy of the OS will remain on the computer, and every time you boot, a window will appear with a boot selection. After the transfer, we recommend that you perform a number of actions:

• Without deleting the original copy from the HDD, test the operation of Windows on the HDD. There are times when the system starts to slow down and performance deteriorates. This happens extremely rarely and depends solely on the selected SSD. As long as the first copy is not deleted, you will always have the opportunity to return to using it and remove the OS from the SSD;
• Change your system bootloader settings.

The boot manager is a built-in component that helps your computer determine which installed operating system to run. You can also configure the startup order of hardware components.

Immediately after cloning, the manager will show two systems with identical names - the original and the copied one. When normal operation Windows on an SSD, you need to remove the version that remains on the computer’s hard drive. Follow the instructions:

• Restart your PC and run the version that was moved to the flash drive;
• Open a command prompt Windows string;
• Enter the command shown in the figure below, giving the OS copies on the SSD a unique name;

Using an SSD drive instead of a hard drive increases the speed and comfort of work, making information storage reliable.

It is understandable that users want to change the OS from a hard drive to a solid-state drive.

How to competently clone information with all partitions onto a faster SSD drive without reinstalling the OS?

How to transfer the system to SSD

Read also: How to migrate Windows to SSD - 6 best migration programs

There are several ways to transfer your system to an SSD. Let's look at each of them.

The first method is to transfer the user folder during installation.

To implement it, follow the instructions:

1 During the installation process, at the stage of selecting parameters (step #10) instead of choosing to use standard parameters or their settings, press the key combination CTRL + SHIFT + F3.

The computer will reboot into the so-called "Audit Mode" , you will be logged into your built-in account. "Administrator" .

3 After completing the previous step, you need to simultaneously press the “Win” + “R” keys. Will open command line, where you need to enter “net stop wmpnetworksvc”. After that, enter again in “%windir%\system32\sysprep\sysprep.exe /oobe /reboot /unattend:d:\relocate.xml”

5 After completing the previous step, the User Folder will be transferred to your desired SSD drive.

1. Create a response file using the instructions that were described in method number one.
2. Run the System Preparation Tool in the same way as method number one.
3. Despite the fact that the system is already installed, using this method will boot into audit mode and initial system setup; you do not need to enter the product key if such a request appears, just click the button "Skip" .

You will not be able to sign in to a previously used account, so during the user sign-in step you will be prompted to create a local account.

New Account will be used for initial setup after transferring the profile folder and can subsequently be deleted.

Transfer OC from HDD to SSD

Read also: TOP 15 Programs for Windows disk defragmentation: choosing the best utility

Before starting cloning, it is necessary that the SSD capacity must exceed the one from which we plan to clone.

AOMEI Partition Assistant Standard Edition

Read also: TOP 10 disk cloning programs: their advantages and disadvantages

First of all, let's look at the steps of cloning an OC with additional application, which offers an easy way to copy an OC.

We suggest using the AOMEI Partition Assistant program as a sample. The application is freely available in Russian.

The functional program has a simple option for copying the OC to any disk. Download and install the program on your computer.

• Find the section on the panel "Masters" , located on the left, and select the line “ Transferring OC SSD or HDD".

• A window with information about the transfer opens, read the message and select the tab . Let's move on to the third step.

• Select the location where we will copy operating system. Special attention it is necessary to pay attention to the fact that the drive must be unpartitioned, there should be no partitions and, moreover, file systems, otherwise you will end up with a blank list. After selection target disk select in the tab .

• The next step is to mark the drive where we transfer the OC. You can adjust as necessary, but remember that the volume of the allocated partition should not exceed the one on which the OC is located. Here you can assign a designation to the created section, if necessary. When all parameters are set, select the tab.

• Here the program recommends finishing the installation of the AOMEI Partition Assistant application to copy the OC to the SSD drive. It is suggested that you study the warning. After a reboot, the OS may not load. In such a situation, be sure to disconnect the old disk or swap drives. Confirm your actions by clicking the tab "End" .

• To start moving, press the button.

• A window will open with a list of pending operations, click tab .

• An additional message follows: by clicking on the tab "Yes" , we confirm all our actions. Once the reboot is complete, the process of migrating the OS to the solid-state memory drive will begin. The duration of the action depends on several reasons, such as the size of the data being cloned, the speed of the drive and the capabilities of the computer.

Once the information is transferred to the computer, it will reboot again and you need to format the hard drive to remove the OS and the old bootloader.

• Works with all media
• Free

• Average Transfer Speed

Standard Windows tools

Read also: “NTLDR is missing” - what to do? Solving Windows boot problem

Another option is to copy the system to another drive using typical Windows tools.

This operation is possible only when the Windows program is installed at least 7. Otherwise, without additional programs not enough. Let's look at the OC transfer step by step using an example.

The OC copying operation itself is not difficult using typical means - it is performed in 3 stages:

• Create an OC image;
• Create boot disk;
• Unpack the OS image to another drive.

1. To reproduce the OC image we use Windows program . Open the menu "Start" , Then "Control Panel" .

1. Click on the line "Archiving computer data" and start creating. In the window "Backup or restore files" There are 2 necessary commands that we will use to create an OC image, and follow the required link.

1. We choose where we plan to write the OS image. There are two options: disk partition and DVD. It is worth recalling that Windows 7, even without additional programs, has a large volume. And when you decide to copy the OC to DVD, you may need several drives.

1. Select the location where the image will be stored and click on the tab. The program recommends selecting sections for archiving. Since we don’t copy anything other than the OC, we don’t make a choice; the system itself noted everything necessary disks. So let's click tab.

— “Archive”

1. We confirm the required archiving formats. Select the tab "Archive" and wait for the archiving to complete.

1. After creating a copy of OS Windows recommends making a boot disk.

1. Another way to create a disk using a string "Create a system repair disc" in the window "Archive or restore" .

1. Initially, the boot disk creation program recommends selecting the drive where you want to install blank disk for recording. Click and move on.

If your computer does not have writeable drives, you will not be able to burn an OS image to an optical drive.

1. If the disk contains files, the system will definitely ask for it. If the drive cannot be formatted, use a blank drive.

1. To do this, open the window "My computer" and right-click on the drive. Mark the line.
2. Further steps to create a drive for copying the OS on the selected drive, click the line and wait for the action to end. When finished, a window will appear:

Let's summarize. An OS image has been created, as well as a boot disk for transfer, let's move on to the final stage.

1. We set the computer to reboot, and when finished, go to the boot device selection menu.

This is usually done by pressing the F11 key, but there may be other ways.

1. The OS recovery environment is loaded. First, select the desired language (in our case, Russian), continue by pressing the tab "Next" . After this, a search for installed systems will begin.

1. Once the OS image is made, we move the switch to the second position and continue by pressing the tab.

1. Choose “Restoring your computer using a previously created system image” and continue by pressing tab .

1. To install as needed Extra options, select the tab.

1. At the final stage we will see brief information about the created image. You can start unpacking, to do this, press tab . We are waiting for the action to complete.

1. The system reboots on its own after unpacking is completed. Windows Transfer on SSD can be considered complete.

• No need to download.

• The transfer process is very complicated