To use all the features of a smart watch, you need to know how to pair with an Apple Watch. Before that, you need to prepare the device, and then follow a few simple steps.

Preparing Apple Watch and iPhone for Sync

What iPhones does the Apple Watch work with?

To manage and use Apple Watch, you need to update your mobile device to new version operating system. Device compatibility examples:

1. 3 watch model (using GPS and supporting cellular networks) + iPhone 6 or higher.
2. 3 watch model (only GPS is present) + "iPhone" 5s or older version.

If, after comparing the bundles, it turns out that your technique is suitable, then you need to do the following steps on the phone:

1. We go to the "Settings" program.
2. We are looking for the item "Bluetooth".
3. Change the position of the slider to active.
4. We check that the mobile device is connected to Wi-Fi or a cellular network.

When did you purchase new iPhone and want to transfer the clock data through the old device, you should:

1. Find out Apple ID, equipment must be charged over 50%.
2. Refresh old phone. In the "Settings" application, go to the "Basic" item, click on "Software Update". We are waiting for the gadget to detect them and download them.
3. Launch the Health and Activity apps in iCloud.
4. Do backup. Get detailed instructions and all possible ways, available on the manufacturer's public website.
5. When setting up a new phone, when the question of synchronizing settings pops up, select the appropriate item. After select the latest version.
6. Link watch to phone.

Step-by-step instructions for connecting Apple Watch to iPhone

How to check the connection

To form a pair, you need:

1. Update the mobile gadget to the final version of the operating system.
2. Launch Bluetooth.
3. Connect your device to the internet.
4. Open and put on the device. To do this, you need to hold down the button located on the side until the company sign pops up. The procedure takes several minutes.
5. Bring smart watch and mobile device closer together. The phone screen must be turned on, we are waiting for the pop-up notification to appear. At the bottom of the text, click on the "Next" button. In the absence of this notification, click in the Watch settings, click on the "Create a pair" item. Until the transmission of information stops, keep 2 devices nearby.
6. Position the phone above the animation. Place the watch display module under the gadget's camera. After waiting for the end of the binding technique. If this method does not work, then click on “Create a pair with Apple Watch manually”. You must follow the instructions on the screen.
7. If this is not a new watch, then download the backup copy. After some time, you will be prompted to update the equipment to a new version, it is recommended to do this immediately.
8. Then wait for a notification in which you will be asked to enter data from your Apple ID. You can not wait, but enter your username and password in the settings yourself. It is located in the "Basic" section. Additional functions The ones that require a phone number only work when you're signed in to iCloud. Provided that Find My Phone is not set up, an alert will be shown. You will need to enter the virtual mail address and password associated with the Apple ID. If the watch was bought second hand, then the activation lock can only be removed with the help of the previous owner.
9. The Smart Gadget shows which settings are applied on both iPhone and Watch at the same time. Any features that are included on mobile device, will be automatically launched on the watch as well. You can easily calibrate other features. For example, Siri is a voice assistant.
10. You will also be prompted to create a PIN. You can skip this step, but then the cashless payment function will become unavailable. On the phone, in the settings, select "Create a password". We enter it on the device or press a single button to skip this step. Apple Pay is immediately set up by adding a card.
11. On the screen mobile phone will be presented detailed instructions to set the parameters of all functions. On Watch models marked Cellular, you can choose options cellular communication. After this procedure, it is possible to install applications from the market.
12. Save information. The duration of data transfer directly depends on the volume. The equipment must be next to each other, before the sound signal.

What to do if Apple Watch does not see iPhone

If notifications do not come to the wrist device, then this is due to the lack of synchronization between the equipment. In this case, a red icon in the form of a crossed-out phone will be displayed on the screen. Also check is done through the settings.

Breaking and re-creating a connection

When choosing this method necessary:

1. On the Watch, select "Settings", find the "Reset" section and tap on the inscription "Erase content and settings."
2. On the phone, open the Apple Watch program, break the pair.
3. Create a new pair.

Contacting Apple Support

If these methods do not help, you should contact the technical support of the company for advice.

You can do it at home by going to the official website.

How to connect to iPad

The procedure for connecting iPad to Watch is completely similar to the method used on the phone.

The company has thought of various bundles of devices.

Apple Watch Series 3- latest generation smart watch from the Cupertino tech giant. Unlike the Series 2, they are equipped with a standalone LTE module that works through the built-in eSIM (not yet supported in Russia), so they can be used even without a smartphone. But it will still be required to activate the device.

How to turn on Apple Watch Series 2, 3?

To turn it on, press and hold the "long" (not round!) side button until the manufacturer's logo appears on the display.

If after 10-15 seconds of holding the long side button the screen does not flash and the device does not turn on, make sure that it is sufficiently charged. Connect the "charger" and leave for 30 minutes. After that, you can try to turn on the device again.

How to set up Apple Watch Series 2, 3?

For initial setup You will also need a smartphone updated to the latest version of iOS, with Bluetooth turned on and an active Internet connection (mobile network or Wi-Fi).

How to do initial setup

In order to initially set up the smartwatch, you will need an iPhone with Internet access. How to connect these two devices:

• Enable them;
• Bring the watch to the iPhone. Wait a while until a message appears on the phone screen asking you to use your smartphone to make settings. In it, click "Next". If it doesn't appear, check Bluetooth - it should be on. You can also open the corresponding application and click the Pair button;
• After that, a special animation will appear on the watch screen, and the smartphone will turn on the camera through which it will recognize it. Position the display of the companion device in the center of the viewfinder as shown in the tips. If automatic recognition does not occur, click the "Pair manually" button. The wizard will show you how to pair devices;
• Choose which hand you plan to wear the watch on;
• Agree to all terms of use;
• Enter your Apple ID password.

How to connect Apple Watch 2, 3 to WiFi?

The smartwatch copies the settings profile from the connected smartphone upon initial activation. That is, if Wi-Fi, GPS, Siri, etc. are enabled on the iPhone, they are automatically activated on the companion device as well. Passwords wireless networks will also be transferred along with the rest of the data.

You can enable WiFi on Apple Watch 3, as well as disable it or configure other settings, directly in the corresponding window of the initial setup wizard.

What else can be done?

In the First Time Setup Wizard, you can also:

• Set a login password. It will be activated when removing this accessory from the hand;
• Set up a corporate payment service;
• Install apps from the AppStore.

During the initial setup process, various usage tips will be displayed on the smartphone screen.

Main functions of Apple Watch Series 2, 3

Apple Watch Series 2, 3 activity analysis

Tracking software physical indicators called "Activity" and is pre-installed with watchOS, meaning it's ready to go right out of the box.

Interesting

Instructions on how to enable or disable activity tracking are shown directly in the initial setup wizard on the smartphone. There are hints in the app itself.

The donut chart interface displays the following metrics:

• The number of calories burned during movement (Mobility parameter);
• Total duration of movements (parameter "Exercises");
• The number of hours in the current day, in each of which you moved at least 1 minute (the "Warm-up" parameter).

Swipe up on the screen with pie charts to view detailed information about each parameter.

The "Exercise" and "Warm Up" options are not configurable. "Mobility" can be changed with a strong tap on any screen - this will open a screen with settings for the number of calories that you need to burn to achieve your daily goal.

Reminders about the need to "walk" are configured in the control application on the smartphone, in the "My watch" - "Activity" tab.

How to measure pressure Apple Watch Series 2, 3?

No way. This model, like the previous ones, is not equipped with a built-in tonometer and therefore cannot measure blood pressure.

Heart rate measurement on Apple Watch 2, 3

To measure the pulse, you need to launch the "Pulse" program from the application menu. In addition, the device constantly analyzes the heart rate when the "Training" mode is active, as well as 3 minutes after it ends.

When you open the Pulse program for the first time, the application will prompt you to turn on notifications about increased heart rate in the absence of physical activity of use. This function can be activated if necessary.

Apple Watch heart rate variability

To measure heart rate, photoplethysmography technology is used, i.e. the pulse is analyzed by the degree of light transmission of blood in the vessels under the skin.

As a result, the quality of the pulse measurement may vary depending on how the photocells are attached to the skin, skin color, the health of the user, and other factors. The exact value may differ by several beats per minute from the measured one, both up and down.

Sleep analysis in Apple Watch Series 2, 3

There are no built-in tools for monitoring the quality and phases of sleep in this companion device. Therefore, it is recommended to use a third-party for tracking. software, which can be downloaded from the AppStore - such as Sleep++, AutoSleep, Sleep Better, Sleep Tracker, etc.

How to track sleep on Apple Watch 2, 3 using third-party software

The principle of operation of various third-party software is approximately the same. Required:

1. Install the desired sleep tracker from the App Store;
2. Open sleep tracker and start tracking mode.

Smart alarm clock for Apple Watch Series 2, 3

To use the watch as a smart alarm, you will also need to install third-party software that supports this function. For example, Sleep++ or similar from the list above.

How to use Apple Pay on Apple Watch 2, 3?

In order for the branded payment service to work, you will need to set a password code. This is described in the instructions for the initial setup of the device. In addition, right in the same menu, you can link the card with which you plan to pay for purchases.

To configure the service, if this item was skipped in the initial setup menu, you will need:

1. Open the Watch app on your smartphone;
2. Open the "My Watch" tab;
3. Open the "Wallet and Apple Pay" item;
4. If you don't have a passcode set on your watch, the app will prompt you to set one right now. Do it;
5. Click "Add card";
6. Choose a card from among those already linked - or enter the details of a new one;
7. Enter the security code of the card;
8. Click "Next" and wait for information from the issuing bank;
9. Click next.

That's it, the branded payment service will work.

To pay in the store, you will need to quickly press the side button on the watch twice and then bring it face down to the terminal. When activated, they vibrate slightly.

Need to know

If the transaction size exceeds 1,000 rubles, you will have to enter the PIN code of the linked card at the terminal to pay.

Unlock Mac with Apple Watch

The watch can only unlock computers and Mac laptops that work on macOS High Sierra and support wireless connection via Bluetooth. In addition, all company devices must be linked to the same account. To set up unlocking, do the following:

1. On a computer or laptop, open the "Settings" application, select the "Protection and Security" item in it, then "General";
2. Check the box next to "Unlock Mac with Watch";
3. Enter the account password;
4. Confirm.

All. The computer will now unlock automatically.

How to charge Apple Watch Series 2, 3?

You need to use the supplied wireless charger for charging. It is enough to connect it to the network and put the watch with the back side on its active surface. The charger is equipped with special magnets that automatically align it.

You can also use AirPower wireless charging.

How to charge your Apple Watch outside the home

For charging, you can use not only the household network. The power cable can also be connected to USB ports computer, laptop, external battery (“power bank”) or any similar charger.

How to update Apple Watch 2, 3?

The software update (watchOS) is performed via the linked iPhone smartphone. Instruction:

1. Set your watch to charge. Until the update is completed, you cannot remove it from the charger;
2. Make sure they are more than 50% charged;
3. Open the Watch application on your smartphone, in it - the "My Watch" tab;
4. Select the "General" item, in it - "Software Update";
5. Download the update. If necessary, you will need to enter a password for your account;
6. The update will install automatically;
7. Installing the update may take time. Wait for completion. The corresponding indicator will report about it.

You can only remove the watch from charging after the update is complete.

Can an Apple Watch be connected to Android?

No you can not. Apple Watch does not work with Android phones. Does not exist third party application, which would mimic the corresponding software for iOS.

However, the user community is looking for a different way to link these two devices. But for now, the answer to the question “Does Apple Watch work with Android” is no, it doesn’t.

Apple Watch Series 2, 3 Express Guide

How to check Apple Watch 2, 3 for authenticity

First, make sure it's a Watch and not an "iWatch smartwatch" or something like that.

How to check Apple Watch upon purchase:

1. Perform a visual inspection. Make sure the case is free of any connectors, including slots for SIM or memory cards, charging connectors, etc.;
2. Turn on the device. Make sure it basically turns on;
3. Try connecting to your smartphone. If during the initial setup the device prompted you to enter your account information, you can enter. The main thing: so that there is no “Activate Watch” screen.

How to disable GPS on Apple Watch 3

GPS does not turn off. Can be disabled on the phone, then the number of location requests will decrease slightly.

Apple Watch Series 2, 3 not charging - what to do?

If your Apple Watch won't charge, you can try the following:

1. Make sure the power supply is plugged into an outlet and that it has power. Try a different outlet;
2. Make sure the wireless charger is in contact with the watch and the magnets have lined it up. Try to reconnect. Try turning the charger over;
3. Make sure that the chargers (including the wireless module, cable and power supply) are original and supplied;
4. The charger should not have a shipping film on either side;
5. The charger and watch must be clean;
6. Try to force restart your watch. Press the round and side buttons and hold them for 10 seconds. After the reboot, put it on charge again;
7. Try another cable, another power supply, another wireless charger.

If they still won't charge, take them to service center.

How to reset your Apple Watch to factory settings

The easiest way to reset is to remotely delete all personal data through the iCloud service:

1. On a computer, open icloud.com;
2. Log in with your account;
3. Select "Find iPhone";
4. Choose your watch from the available devices;
5. Click "Erase" and then choose "Next" until the process is complete;
6. Also click the "Delete" button (icon with a cross) next to the name of the watch.

Through the application is a little more difficult. More about this will be written later in this instruction in Russian (in the section "How to break a pair").

In order to reset the watch (perform the so-called "Apple Watch Restore"), the associated iPhone must be connected to the Internet via mobile communications or WiFi.

How to charge Apple Watch without original charger

The 3rd generation companion device (Apple Watch series 3) supports the standard to a limited extent. wireless charging Qi, so it may be compatible with some chargers. Try placing the back of it against a Qi-enabled active charger for a few seconds. If charging goes on, this device can be used.

How to unpair an Apple Watch 2, 3

Before selling the watch, you will need to remove your own credentials from it. How to unlink Apple Watch from Apple ID:

1. Open the control app on your phone;
2. Open the "My Watch" tab;
3. Open the "Information" menu (indicated by the i symbol in a circle next to the name of the watch);
4. Select "Break Pair";
5. If used tariff plan, click "Delete tariff";
6. Enter your account password;
7. Confirm your desire to break the couple.

Unbinding also resets to factory settings.

Notifications not coming to Apple Watch Series 2, 3

This may be due to the following:

• The smartphone that the smartwatch is connected to is currently in use. Then notifications are displayed on it;
• The watch has a screen lock or do not disturb mode active. Unlock or disable this mode through the Control Center;
• The watch is disconnected from the phone. This is reported in the Control Center with a special icon. Turn on phone Wi-Fi and Bluetooth, and on your watch, activate Airplane Mode first and then turn it off.

How to unlock Apple Watch 2, 3

To unlock your watch, touch the screen or briefly press any button, and then enter the passcode you set earlier.

How to change the strap on Apple Watch 2, 3

The watch uses special straps with proprietary fastening. It will not work to use the standard spring, common in analog devices. But to change the strap, it is enough to remove the old one and install a new one in its place until a characteristic click appears.

How to remove the band from Apple Watch

1. Turn the clock face down;
2. Press the strap release button (located next to the strap);
3. While holding the release button, slide the strap to the side.

How to turn off your Apple Watch

To turn off the watch, press and hold the side button until the Off slider appears, then slide it.

Phones and other smart gadgets have long and firmly entered everyday life. This review will be of particular interest to fans of Apple technology. It is dedicated to one of the most popular models among smartwatches. We will analyze how to use the Apple watch and a few basic settings related to how to connect the Apple watch to iphone, unpair and more.

What to Consider

Some gadgets are quite easy to use and do not need instructions in Russian. The interface is friendly and everything is intuitive. But, not in this case. Probably, everyone knows the fear when you use an expensive thing and study the instruction manual for a long time. To deal with the "Apple watch", a few minutes is not enough. The device may be heavily discharged and will take additional time.

First start

First minutes. The box is unpacked, the user is in front of the instruction in Russian, magnetic charging, and what's next? Before using the gadget for the first time, it is highly recommended to charge the battery. This guarantees its long-term operation in the future.

The very first launch lasts more than a minute. Do not strongly scold the developers of "Apple". The device is the first of its kind. The device itself is very small, so it does not combine powerful hardware. In the future, the clock will run much faster.

Read also:

Watch phone Explay N1

Inclusion

How to turn on apple watch? To do this, you just need to click the side button on the sidebar

Activation

Activation occurs when the user raises their hand to look at the watch.

Setting

How to set up apple watch correctly? The setting includes the items:

1. The watch battery must be fully charged;
2. Language selection and application installation;
3. Wrist selection;
4. Setting up security settings;
5. Install applications manually or in batches in auto mode
6. Customizing watch faces
7. View device information;
8. Regulation of trackers and notifications;
9. Music Configuration
10. Work organization.

Synchronization in automatic mode

How to link watch to iphone? Apple watch synchronization with iPhone is performed in automatic mode. For this:

• Application icons are on the screen. Select "Apple watch"
• To start synchronization, click on "Start Pairing" on both devices
• The yellow video finder of the iPhone must be aligned with the animation on the watch display
• As soon as the pairing is completed, a notification will appear on the iPhone screen about the completion of the operation. The user needs to click on the "Set up as new Apple watch" button
• The system will ask which hand the owner plans to wear the watch on, select one of the two options
• Next, you need to agree to the terms and conditions of use
• Enter the data from the Apple account (login and password)
• The system will display information about location services. Check it out and click OK
• Repeat the steps after getting to know voice assistant"Siri"
• After that, the display will show diagnostic information
• Now you need to enter a 4 or 7-digit watch password
• The system will prompt you to set up simultaneous unlocking of devices
• Can choose automatic installation applications, or install them yourself later
• After completing all the steps, the iPhone will receive a notification that the creation of the pair has been completed.

Read also:

Fitness bracelet Bizzaro F570 with ECG function

Pairing

How to set up an apple watch with an iPhone? The pair can be created by the user. How to manually sync apple watch with iphone? I can imagine how much excitement this question causes. About everything in order.

Pairing is done in several steps:

• As in the first case, you need to click on the application icon
• Touch the "start pairing" button
• At the bottom of the display, the option manual installation. Select it and click on the button with the "i" icon
• After the iPhone "sees" the clock, repeat the steps from the fourth paragraph of the previous installation option
• During pairing, both devices must be at a close distance from each other

Pair break

If you want to break the pair:

1. Devices must be close to each other;
2. Go to "my watch" select the model and mark the letter i;
3. Break a couple.

If one of the devices is far away

1. Go to watch settings
2. We choose the main ones;
3. We click on reset.

How to connect to a computer

How to connect apple watch to computer:

Under the interchangeable strap is a port through which, using a cable, you can connect to a PC.

If the clock does not turn on

Some users are concerned about the question of what to do if you can’t turn on the clock? In most cases, they simply require charging. If after a long time you still cannot turn on the gadget, contact the supplier.

Connecting to ipad

Connecting an ipad to an apple watch is no different from an iPhone.

You became happy owner modern gadget but don't know how to turn on your Apple Watch? Then this information is for you!

How to enable iWatch

Before the very first inclusion of your purchase, the watch must be put on charge and not touched for a couple of hours so that it is fully charged. After all, this will guarantee a long battery life.

The first acquaintance with a smart watch is quite an exciting moment. Turning on the Apple Watch for the first time may be a little disappointing for some fans of the legendary company's gadgets. This is due to the fact that the time allotted to start the device is just over one minute.

Such slow speed is a nuance that can be treated with indulgence, since such a miracle of technology is the first of its kind among Apple products. Precisely, the first start of the smartwatch is 1 minute and 10 seconds.

It must be understood that powerful hardware could not fit into such a small device, which is the firstborn of its generation. In this case, only the first launch of the gadget takes such time, and for ordinary users in the future, this moment will be reduced to "no".

How to start iWatch?

After unpacking the watch and visual inspection should be put into action, that is. How to turn on your Apple Watch for the first time:

• on the right side of the gadget under the round button is the power button;
• after pressing it, the characteristic Apple icon will be displayed on the screen;
• at what the image will be dim at first, this should not be frightened;
• do not press anything until the gadget prompts you to select a language.

Photo: Language selection on Apple Watch

After 1 minute and 10 seconds, you can proceed to the (5th or newer model).

Pair iWatch and iPhone

First, make sure that both devices are turned on, active on the phone:

• Internet (mobile or).

Devices should be located close to each other. You need to open the iWatch app on your phone.

Turning on the Apple Watch for the first time activates synchronization between devices, so the “Create a pair” request will appear on the watch screen and, having responded positively to it, the same manipulations should be carried out on the smartphone.

Then the phone's camera is directed to the screen of the device, a few seconds of animation - and the pair is created. When wondering how to turn on the Apple Watch for the first time, you need to know the following points that arise when synchronizing with a smartphone:

• the screen will prompt you to select the hand on which the Smart Clock will be worn;
• then enter password Apple ID. " Activation lock"Will be displayed if the service" "is installed on the phone;
• all that are performed on the smartphone will be automatically transferred to the watch. Therefore, it is recommended to double-check them;
• then , is created, which can be either four digits (short password) or more (long password). You should decide on such a setting as a phone or vice versa;
• App Sync: By clicking Later, only Messages, Mail, and Contacts will be synced.

The whole process does not take much time.

Apple Watch won't turn on

Why won't my iWatch turn on?

Frequent problem of iWatch not turning on

What to do if Apple Watch won't turn on? There can be several reasons for this, the most common being a dead battery. To rule out another problem:

1. Connect your device to charge.
2. Try turning it on by pressing and holding the side keys.
3. In the event that the problem is really in the battery, let the battery fully charge, and then use the watch.

If, after the actions taken, iWatch does not turn on, perhaps the reason lies in the “glitch” of the system. Then a reboot is required. Although this wrist accessory is quite small, it is a mini-computer and, like any system, can sometimes fail.

How to turn on Apple Watch?

To reset them, you need to simultaneously press the side button and the Digital Crown and hold for ten seconds. Don't worry, such an operation will not result in the loss of settings and data.

Let's look at other issues that can cause your iWatch not to turn on.

Other problems with iWatch not turning on

The clock could stop turning on for various reasons. You can try to solve this problem on your own. You can easily fix simple problems. Most likely, the clock does not start due to:

1. Damage to the physical power button.
2. Software failure, freeze.
3. Damage to the watch as a result of physical impact (fall, impact).
4. Water ingress into the watch.
5. Apple Watch battery failure.

How to solve a problem?

Most effective ways Troubleshooting:

• contact a consultant technical support Apple company;
• take the watch to their support center.

As already mentioned, the clock can be simply discharged. Before doing anything, charge them. Check:

1. Charger status.
2. Is the power adapter plugged in.
3. Is the cable loose.
4. Is the connector in the watch and the charger dirty?
5. Try charging with a different cable and adapter.

Some easy troubleshooting tips

Some simple troubleshooting steps are listed below:

1. Dry your Apple Watch.
2. Replace charger.
3. Force reboot the gadget (this is done by simultaneously pressing and holding the side button and the Digital Crown for ten seconds).

If after doing forced reboot the logo in the form of "Apple" will appear - the device is working.

Instead of a conclusion

Turning on your Apple Watch can be difficult if the battery is dead and the charger is broken. When you charge the accessory, make sure that the cord and block are in good condition.

In the event that this did not help start the Apple Watch system, then, most likely, this is a breakdown of a technical nature. Do not try to disassemble the gadget yourself. It is better to contact the nearest service center, where the master will unequivocally determine the reason why your accessory does not turn on.

How to untie Apple Watch from iPhone (break a pair): 3 ways. How to pair with apple watch a second time

How to pair with Apple Watch. How to Connect to iPhone or iPad

If you already own an Apple smartwatch, then you should connect your Apple Watch to your iPhone in order to take advantage of all the features of the watch. This article will tell you how to pair with Apple Watch. Also here you will learn how to connect the watch to iPad tablet, how to check the connection between devices and what to do if the Apple Watch does not see the iPhone and the connection between them cannot be established.

How to pair with an Apple Watch - the creation process

There are 2 ways to create a pair of Apple Watch, iPhone - automatic and manual. The first way to connect gadgets is faster and easier, for it you will need:

In case it is not possible to perform automatic creation couples (the camera on the smartphone does not work, other problems), you can do everything manually. How to connect Apple Watch to iPhone manually:

1. Place both devices next to each other.
2. Turn on Wi-Fi on your iPhone, or mobile network.
3. On the iPhone screen, tap the “Watch” app icon.
4. Turn on the “start pairing” function.
5. Next, select the “manual installation” mode at the bottom of the screen.
6. Touch the “i” symbol.
7. The iPhone should now see your watch.
8. Then just follow the instructions of the program.

What iPhones does the Apple Watch work with?

It all depends on what model of watch you have, but one thing is for sure - you will not be able to connect even the earliest model of smart watches from Apple to iPhone model which is younger than 5s. Also, a prerequisite is the availability of a version of the operating system. iOS systems.

Apple Watch Series 3 (GPS) and all earlier models will work with iPhone 5s, or later phones with GPS installed. latest version iOS.

Apple Watch Series 3 (GPS + Cellular) will only work with iPhone 6 or higher (7, 8, X) running the latest version of iOS.

How to check the connection between Apple watch and iPhone?

You can check the connection in two ways - using the watch, or on the phone screen.

To check the connection on the watch display, you need to open the “Control Center”, for this, swipe the picture of the main screen from top to bottom. If a crossed-out iPhone icon or a red X appears in the upper left corner of the watch, then the connection between the devices is not established. When using the Watch app on your iPhone to check if you have a connection, you should go to the app and open the Watch tab, it will show you the connection information.

How to connect to iPad?

The principle of connecting Apple Watch to an iPad tablet is no different from the method of connecting to an iPhone smartphone, which you can see above in this article.

What to do if the Apple Watch does not see the iPhone?

The first thing to do in this unpleasant situation is to check the connection, as described above in this article, if there is no connection, then this is the problem.

The smartwatch manufacturer offers several ways to solve this problem to choose from.

Method one: Reconnect

Try connecting your Apple Watch to iPhone again. In order for everything to work successfully, make sure that the devices are close to each other, it is also worth making sure that the iPhone is connected to Wi-Fi and Bluetooth, and “Airplane mode” was turned off opposite. To do this, open the bottom curtain of the device by swiping the screen from the bottom up. Pay attention to round wifi images and Bluetooth? They must be active, the image of the aircraft must be inactive.

Next, check the Apple Watch face. If you find an airplane icon, then “Airplane Mode” is enabled on your watch. In this case, go to the Control Center, to do this, swipe the watch face from the bottom up and turn off the Airplane mode by clicking on the airplane symbol.

Finally, restart your Apple Watch along with your iPhone.

If after that it is not possible to restore the connection, resort to the second method.

Method Two: Unpair and Re-Pair Apple Watch and iPhone

1. In the watch settings, open “Settings”, then select the “General” tab and click “Reset”, then “Erase content and settings”.
2. In the "Apple Watch" app on your iPhone, you need to select "My Watch" and tap on the clock at the top of the display. There will be an “i” icon next to the watch symbol, click on it and select “Unpair Apple Watch” from the menu. Press twice to confirm the action.
3. Now pair your Apple Watch and iPhone following the instructions above again.

Method three: Apple Support

If none of the above methods does not work, it is recommended to contact the Apple support service on the official website of the manufacturer, or in ReStore stores, or, in the absence of such an opportunity, to the service center. Do not attempt to troubleshoot connection problems caused by damaged devices yourself.

myapples.ru

How to re-pair your Apple Watch

How to connect Apple Watch to iPhone. Full instructions.

Apple Watch - setup and first impression

mi band 2 does not connect, synchronization of the fitness bracelet with the phone

Xiaomi Mi Band 1S won't connect/sync SOLVED THE PROBLEM SIMPLY!

Why the phone does not see the Bluetooth headset

iPhone 8 Commercial Leaked!

GoPro Hero 4, 5 and 3: How to connect a GoPro camera to iphone (iPhone) and update the firmware (firmware)

NEW LIFE OF OLD TV: POSSIBILITIES OF MODERN MEDIA PLAYERS

How to connect Sony SmartWatch if they are not supported by your smartphone

GoPro Hero 4 - how to connect to phone - #31

See also:

• How to set ringtone for iPhone
• How to Transfer Photos from iPhone to Laptop
• Message iPhone what is it
• How to reset password on iPhone app store
• mac installation os on Macbook from disk
• Download vfeed like on iPhone for Android
• How to transfer photos from camera to iPhone
• How to Verify Email on iPhone
• How to download old version skype on iphone
• iPhone 4 not in dfu mode
• How to clean iPhone from scratches
• How to setup bank card in iPhone
• How to get photos back on iphone after update
• How to adjust screen resolution on iphone 6 taiwan
• Screen turns blue on iPhone

Home » Choices » How to re-pair your Apple Watch

iphones-4g.ru

How to get started with Apple Watch, pair and sync with iPhone

If you have already bought an Apple Watch or are just about to do so, this guide will show you how to make initial setup, pair and sync your Apple smartwatch with iPhone.

Although the official sales of the Apple Watch started only on April 24, back in early March, Apple released the final iOS version 8.2, which introduced a new Apple Watch app that allows you to pair your Apple smartwatch with your iPhone. In addition, the Apple Watch app can be used to make some adjustments to your smartwatch and sync data between it and your smartphone.

Initial Apple Watch setup

1. To start using your Apple Watch, you need to pair it with an iPhone 5 or later running iOS 8.2 or later.2. Go to "Settings" -> "Bluetooth" on your iPhone and make sure Bluetooth is enabled.3. Make sure your iPhone is connected to Wi-Fi or a cellular network.4. Turn on your Apple Watch. To do this, press and hold the button on the side of the watch (next to the Digital Crown) until you see the Apple logo on the screen.5. Select and set the language on your Apple Watch. You can scroll through the list of languages ​​using swipes across the screen or the Digital Crown.6. After that, a window will appear on the Apple Watch screen prompting you to launch the Apple Watch app on iPhone.7. Make sure your Apple Watch and iPhone are charged and close to each other.

How to Automatically Pair an Apple Watch with an iPhone

3. Align the yellow viewfinder on iPhone display with animation on the Apple Watch screen.

4. As soon as a message appears on the iPhone display that the pair has been created, click on the "Set as new Apple Watch".

5. Depending on which hand you wear the watch on, choose one of the two suggested options.

6. Confirm that you agree to the terms and conditions.

7. Enter your login and password account Apple ID.

8. Click "OK" after reading the information about location services.

9. Click "OK" after reading the information about Siri.

10. Click "OK" after reading the diagnostic information.

11. Set a 4-digit passcode for your Apple Watch. For more security, you will be prompted to set a long password of 7 characters. Select desired option. Note that the passcode must be entered on your Apple Watch, not on your iPhone.

12. Choose whether you want your Apple Watch to unlock with your iPhone.

13. Choose whether you want your Apple Watch to automatically install all available applications. You can also skip this step and install them later.

14. After that, on the iPhone display, you will see that synchronization with Apple Watch is complete.

15. That's it. You've done the initial Apple Watch setup, paired it, and synced it to your iPhone.

How to manually pair an Apple Watch with an iPhone

If for some reason you don't want to automatically pair your Apple Watch with your iPhone using the camera, you can pair it manually. In this case, simply enter the name of your Apple Watch to initiate the pairing process.

1. Launch the Apple Watch app on your iPhone.

2. Press the Start Pairing button on your iPhone and Apple Watch.

3. Click "Manual Pairing" at the bottom Apple screen Watch, and then press the "i" button, after which the name of your Apple Watch will be displayed on the screen.

After your iPhone detects your Apple Watch, follow all the steps above one by one, starting from step 4.

Apple Watch Instructions

If you have already bought an Apple smartwatch or are planning to do so, you may find our other guides to using Apple Watch useful:

How to get started with Apple Watch, pair and sync with iPhoneHow to find and install an app on Apple WatchHow to remove an app from Apple WatchHow to turn on, turn off or completely reset Apple Watch

newapples.ru

Owners of smart watches sooner or later are puzzled by questions about pairing Apple technology with each other. In 90% of cases, this is a question of how to pair an iPhone with an Apple Watch. This is not surprising, since the company that supplies such equipment to the market has its own characteristics, which indicate the individualization of the approach.

Don't be intimidated by pairing or syncing your iWatch with your iPhone or iPad, it doesn't take much time and just a few steps.
Photo: How to pair Apple Watch to iPhone?

Step by step guide on how to connect Apple Watch to iPhone?

If you connect each step of connecting or syncing a smart watch to another device from Apple, you get step-by-step instruction, which will help a novice user solve this problem. So, to successfully connect iWatch to iPhone, you need:

• turn on the watch by pressing the button on the side, it must be held for 1-2 seconds, in a word, until the Apple logo appears;
• after the company icon is displayed, you will see a message on the accessory screen in which you need to select a language (there are 4 in total). Settle on which one you know best;
• this is followed by confirmation to pair the Apple Watch and iPhone. It must be accepted;
• install according to the instructions iPhone application for smart watches, go into it, select "Pair", and it should appear

appleiwatch.name

How to untie Apple Watch from iPhone (break a pair): 3 ways

If you have a desire to sell your Apple Watch (or pair with another iPhone), then you will certainly encounter the need to unpair the device from the iPhone (unpair). It is very simple to do this: you just need to perform a series of simple steps, and you can do this even in the absence of a smartphone.

In contact with

You may also need to untie the Apple Watch from the iPhone if one of the gadgets malfunctions.

How to untie (unpair) Apple Watch from iPhone if both devices are in front of you - method 1

1. Place both gadgets next to each other;

2. Open the Apple Watch app on your smartphone;

3. In the window that opens, below, the menu "My Watch" will be located - you should click on it;

4. After that, you should click on the item "Apple Watch", on the next screen you need to click on "i".

5. By clicking on the "Unpair with Apple Watch" button, you should confirm the cancellation of device synchronization, after which all data about the watch will be deleted from the communicator.