Hard disk drive (HDD) personal computer is the most vulnerable device, since in its design it uses many mechanisms through which data is read. However, due to such advantages over integrated memory units as speed and the ability to format without losing HDD clusters, it is still used in PC architecture. With intensive long-term work, mechanical damage to the hard disk is often observed, which can lead to the loss of some information.

How to recover HDD?

The main reason for the incorrect operation of the HDD is "broken" sectors, the reading of which is not possible. Often, PC owners, when a hard drive fails, try to “reanimate” them on their own, which can lead to even more unfortunate consequences, and specialized information recovery services require a rather high payment for their services.

It should be noted that in some cases we are not talking about restoring the working capacity of the HDD at all, because only the information that is contained on the hard disk is important. For these reasons, the only true method to implement access to lost data is specialized software.

In this article, we will consider the program HDD Regenerator, which is often used for professional purposes by many services. The main difference between HDD Regenerator and many similar programs is a low-level algorithm that allows, through integration into the DOS environment, access not only to the HDD itself, but also to control and restore sectors and disk memory cells, as well as participate in monitoring and control of hard drive mechanisms using hardware methods.

For these reasons, HDD Regenerator really restores "broken" sectors, preserving the information that was stored in them, and does not demagnetize and remove them from the general array. Initially, we need to download and install HDD Regenerator on a PC. In order to describe in more detail the process of the hard disk recovery program, we will consider the functionality of the software through the Windows interface.

So, after installing and running HDD Regenerator, a dialog box appears in front of us.

Operation of HDD Regenerator directly in OC Windows.

To check and restore the HDD in the system shell, click on the top line indicated in the photo. You will see a window for selecting hard disk partitions that need to be restored.

Sometimes there is a warning that your HDD controller SATA works in mode ANCI. To fix this error, you need to reboot through the BIOS and set SATA as the working mode IDE.

Remember! When using this program, you must disable all applications that access the hard disk during operation (antivirus software, search indexing, etc.).

It often happens that this is not possible, which is clearly demonstrated by the dialog box that constantly appears during the verification process.

In order to avoid such messages, press the button " Cancel« , as a result of which the Command Line console appears in front of us, where four points are indicated.

1. Diagnostics and scanning of "broken" sectors and partitions.

2. Full HDD scan with/without data recovery.

3. Software version.

4. Information about the results of the HDD Regenerator.

Pressing the key as an example 2 And Input and monitor the progress of the hard disk check.

It should be noted that HDD recovery by this method does not allow for complex hard disk, therefore it is very inefficient in some cases. How to restore hard work computer disk?

HDD recovery via bootable flash drive

To do this, you need a flash memory of at least 1 GB. At HDD startup Regenerator, click on the item " Create a bootable flash drive“and wait until the data on it is formatted and the boot data is placed. After that, the program will prompt you to restart the PC, which we do.

In the process of rebooting the PC, you need to go into the BIOS and set the priority for loading OC Windows through the bootable flash card!

After that, a DOS window will appear in front of us, in which we will be asked to select partitions for analysis and recovery.

Select the required directory and click Input. All. The process has started and now we can only wait for the results.

Remember that you can stop the scanning process with the Esc key, however, in this case, no one guarantees correct results, so you should wait until the full recovery process is completed.

In case of significant damage to the HDD, the program will “freeze” while processing a particular sector, and the duration of the program may be several hours. In this case, there is nothing left but to purchase a new HDD and overwrite on it that part of the information that was recovered using HDD Regenerator.

The computer began to slow down? Are files and programs taking too long to open? Do crashes happen all the time? All of this could indicate a breakdown. hard drive. How to find out hard state disk? You will find out in this post.

Hello. Today I will tell you how to test and also repair your hard drive.

Indeed, the hard drive can be the cause of braking and crashes in the computer. The fact is that the hard drive is constantly in operation. We constantly write information to it, and then erase it. There is a constant overwriting of data on our hard drive. All this can lead to malfunctions in its operation. But how do we determine the status of a hard drive?

For this, quite a few various programs have been created, we will consider one of them today. This program is called "HDD Regenerator". Why I chose this particular program. Yes, just because this program quite easy to use, for example, if you compare it with the program "Victoria". Although, of course, Victoria program has more features, but it is more difficult to work with it. In general, today we are working with HDD Regenerator.

Features of HDD Regenerator

This program tests the hard drive, and also performs the recovery of bad sectors (bad sectors). These are the main features of this program.

You can use the program both from under Windows, that is, with the operating system turned on, and from under dos, without using operating system. Program management is the same in both cases. The only difference is how to run the program. Below is a video in which I showed how to use the program with the operating system turned on, therefore, here I will describe the second option, namely how to use the program from under dos. Let's start.

How to use HDD Regenerator

First you need to install this program. The installation process is normal, so I will not describe it. After installation, you launched the program. A program window will open in front of you.

In this window, you need to do the following:

Select "Boot" USB Flash”, click on it.
Next, you will need to choose your USB device, the flash drive must already be inserted into the computer. Select it and click OK.
Next, an informational message will appear in which you just need to click "OK". The flash drive will be written very quickly, and you will be prompted to restart the computer (on English language). Click "Yes", the computer will restart.

Now we do the following:

When turning on the computer, press and hold the "F12" key. This is necessary in order to launch the "BOOT MENU". On some computers it starts differently, if it doesn’t start for you, look on the Internet to see how it starts on your computer.
In the "BOOT MENU", select boot from "USB-HD" (this item may look different, for example, "USB-HDD").
After that, the program with which we will work will be loaded.

The program opens and prompts you to select the drive you want to scan. Select the desired one by pressing the corresponding key (number).

Prescan - this option will show you the bad zones, if any.
Normal Scan - this option will scan and restore bad sectors.
Version Info is information about the hard drive.

Scan and repair is scanning and repair.
Scan, but do not repair - this is to scan, but not to restore. It will just show the bad sectors.
Regenerate - this option rewrites the entire disk, even if there are no bad sectors.

I choose the first option, press "Enter".

Now you need to choose which sector to start with. I choose the first option to start scanning from zero sector. I recommend that you do the same. Press one and press "Enter".

So the scanning began, and if the program finds bad sectors, it will restore them.

After verification, a similar window will appear.

To exit the program, press the Esc key. Another, often, after pressing "Esc", a black screen appears with an input line. Just press the reset button on your system unit. After the reboot, do not press anything, Windows will boot automatically.

That's all. You have learned how to test and repair your hard drive. If not everything is clear, watch the video, on which I showed the process of scanning a hard drive. It should be noted that this method it only helps with hard drive failures, it is unlikely to help if, for example, you dropped the hard drive on the floor, that is, with physical damage.

You can download this program on the Internet, and this program is also on the bootable USB flash drive that we created earlier.

Well, that's where I'll end this post. I hope it was helpful to you. Subscribe to or channel "PC Instructor"

Hdd Regenerator is designed to recover sectors that do not work correctly. The developers claim that the program copes even with severe cases with a probability of more than 50%.

Hdd Regenerator Working Principle

The program generates and alternately sends high and low signals to the damaged sector of the hard disk. Thus creating remagnetization of the disk. Most often, this helps to restore sectors, because they become inoperative due to improper magnetization of the disk.

When using the program, system files and user folders are not affected. Thus, the information that is on the restored disk will not be affected.

How to work in Hdd Regenerator

To get started, you need to download the program. It does not require material resources - Hdd Regenerator is distributed absolutely free of charge.
The downloaded archive contains the "Read me" file, which must be used as instructions for installing the program. Here is the patch and crack.

After installation, the Hdd Regenerator icon will appear on the desktop.

Launch the program by clicking on the icon.

A program window will appear on the screen, where you are prompted to start scanning the hard disk or disk.

We proceed immediately to the recovery process: click the "Regeneration" button in the top tab bar, and then in the drop-down list - "Start the process under Windows".

In the next window, select the hard drive to restore. It is visualized by numerical characteristics: capacity and number of sectors.
We click on the "Start" button, which is located in the middle of the active window.

After clicking the "Start" button, a window may pop up that contains information about disk usage by programs running on the computer. To continue the process, you must close these programs or processes. If you see a window as shown below, then you need to click the "Retry" button.

Another variation of the message is shown below. In this case, click "OK".

After that, a window typical for DOS should appear on the screen.

It proposed four options for further actions with the hard drive:

1 Perform disk diagnostics and further restore it.

2 Run only diagnostics with the output of the results at the end.

3 Perform recovery of specific sectors of the hard drive.

In the next window, specify from which sector the analysis should be started.

Once selected, the program will scan your hard drive. At the end of the process, a window with the results will appear on the screen, where you can see: bad sectors, the number of patched and sectors that are not recoverable.

As you can see, the recovery process using the Hdd Regenerator program takes a little time and does not require special knowledge from the user. With a small weight of the program, which is only 8.8 Mb, it copes with its work quite successfully.

Many of us are familiar with the situation when using a computer becomes problematic due to the fact that your hard drive suddenly refuses to work correctly. The most common option is the so-called bad sectors, which cannot be read. One of them is the HDD Regenerator program.

Purpose of the program:

Diagnostics software faults, treatment of bad blocks.
Hard disk diagnostics () and real-time status monitoring.
If the OS does not boot due to errors on the HDD, you can quickly burn a bootable USB flash drive and bring the hard drive into working condition.

Quite often the cause of disk failure. The above program is designed specifically to fix this problem.

Download the program installer, install and run. By the way, the latest versions are paid, but there is always the possibility download demo, which works with restrictions.

Before starting the program for the first time, be sure to disable all running applications including antivirus. Otherwise, the operation of HDD Regenerator may be incorrect or even impossible. The program will warn you if you have not disabled everything and you can correct your mistake

The program interface is simple and clear. Once launched, you must scan your hard drive by clicking the appropriate button.

Once the process is completed, you will see a list of all logical drives on your PC in front of you. Select a drive to scan and click "Start Process".

I must say that all actions will be performed in the window command line so you need a basic knowledge of English. But even if you don't have them, it's okay!

There are only four menu items: scanning with the restoration of damaged areas, normal scanning (without "treatment"), restoration of sectors in a single section of the disk, and displaying statistics after the scan is completed.

To select an item, you need to enter the appropriate number from the keyboard and press "Enter" ("Enter"). After that, we calmly wait until the program completes its work.

After the scan is completed, you can view the statistics:

number of bad sectors [B]
number of recovered [R]
and just found bad sectors [N],
as well as the total number of "bad" sectors [R]

When the trial version of the HDD Regenerator program stumbles upon a bad block, it becomes clear why the program is paid. She heals the first one, and to restore the rest, you need to pay for the full version.

On some sites you can find information that the program is unique and "surface reversal". This is not so, the program does not do anything supernatural. It just repeatedly overwrites badly readable sectors. As a result, soft-bads will be overwritten, and for more complex ones, the standard Remap procedure will be launched.

The program is quite suitable for the treatment of Soft-Bad blocks, but given that there are good free analogues, it is better to use them. For example, or.

Among all possible ways data storage, despite their great variety, the hard disk does not lose its popularity today. Not everyone dares to upload important information to the cloud, no matter how tempting the terms of using the service may seem, external media also not always suitable for certain tasks, many users prefer to store personal information on internal drives due to the reliability of devices. At the same time, HDDs are also prone to malfunctions, which in many cases provokes failures in the operation of the operating system installed on the disk, or lack of access to user data. Neither one nor the other options are acceptable, so the issue requires an immediate solution. In the event of a complete failure of the hard drive, everything is easier, it will need to be replaced, but most often users are faced with the problem of bad sectors, which are not readable. To diagnose and restore the hard drive, specialized software is used. One of the most successful software solutions is HDD Regenerator.

Setting up and working with HDD program regenerator.

HDD Regenerator app is simple and effective tool recovery of bad sectors and the surface of a magnetic hard disk. The software uses a special surface magnetization reversal algorithm, while the structure of the data recorded on the disk remains the same. The Winchester or Hard Disk Drive, being a mechanical device consisting of several round plates, an electric drive and an information read / write head, wears out over time. Disks made of magnetic material on which information is applied rotate at high speed during HDD operation, and the head moves over their surface, performing data processing. In the event that some sections have lost their properties, writing to them becomes impossible, and reading of previously recorded files is not carried out.

The HDD Regenerator program can detect damaged areas on the disk and repair. When uncorrectable sector errors are detected, the task is to reassign the address of the failed memory cell (one of the reserved values is assigned). Thus, writing will not be carried out on bad sectors, which will slightly reduce the size of the hard disk, but also reduce the likelihood of errors. During a deep scan, the software detects and fixes problems with the surface, with the help of HDD Regenerator, a complete regeneration of the surface is performed using the magnetization reversal algorithm. You can also use the application to diagnose digital media (USB flash drives, memory cards, SSDs, etc.).

Main functions of the program

The software differs in that scanning is performed at the physical level, which ensures interaction with unrecognized, unformatted HDDs and all popular file systems. The media to be recovered retains all existing data. After installing the software, it is possible to create a bootable CD / DVD or flash drive, in order to use it if the operating system cannot be loaded. The developer improves the functionality of the product with each update, latest version HDD Regenerator 2018 offers comprehensive hard drive diagnostics and recovery. The main features of the program are:

Low-level access for diagnosing the physical surface of the HDD.
Detection and treatment bad sectors, checking for errors and correcting them automatically.
Identification of physical damage to the surface of the HDD, elimination of detected problems, regeneration by the remagnetization method.
Possibility to pause the recovery process if necessary.
Real-time monitoring of the hard disk status, notification of changes.
The S.M.A.R.T function allows you to evaluate the current HDD status, operating time, etc.
HDD Information Display ( General characteristics, temperature, devices, degree of fragmentation, and other data).
Detailed statistics of performed procedures.
Create bootable media for use in situations where, due to problems with the HDD, it is impossible to boot the system. When starting from the drive, the program starts and operates in DOS mode.
Ability to work in a Windows environment, regardless of the OS version (starting with XP).

It is easy to use the program of any version, whether it is HDD Regenerator 2011, 2016-2017 or 2018. You can download the software in conditional free version, but activation is required to use all features. In the presence of license key HDD Regenerator the user will have access to full functionality for an unlimited period. The HDD Regenerator program has a convenient and intuitive interface, not overloaded with numerous submenus and unnecessary elements, the Russian language is supported, the functionality is easy to learn, which allows even an inexperienced user to use the tool.

Installing HDD Regenerator

To take advantage of the software features by running it from a flash drive or in Windows environment, first you need to download the distribution kit and install HDD Regenerator on your computer. The key and crack are in the archive along with the installer. In general, the procedure is similar to installing any other software, so there are no difficulties with this. We perform the following actions:

Download the program and run the installer.
The installation wizard will prepare the application for installation, after which we start the procedure by pressing the “Next” button.
We agree to the terms by marking the desired item, and click "Next".
By default, the program will be installed in the folder Program Files located on system drive, if desired, the installation path can be changed by specifying a different directory. Click "Next" and wait for the procedure to complete.
If you check the box "Launch the program", the program will start when you click the "Finish" button. An application icon will also appear on the desktop.

You can run HDD Regenerator directly from the Windows environment or write to external drive to start from it.

How to use HDD Regenerator

Thanks to a clear interface, not burdened with a lot of settings, and a convenient navigation system, working with the program is easy even without a localizer. There are several options for launching the software: from a shortcut on the desktop, from a USB flash drive, or optical disc. Let's take a closer look at how to properly use the HDD Regenerator program. The interface offers several tabs, when you switch to each of them, functions are available that allow you to check and restore HDD, as well as write the software to the media.

The technology allows you to diagnose the HDD, which should be done before the recovery procedure. It is possible that the hard drive is fully functional and the cause of operating system errors or other software problems not at all in it. To do this, go to the S.M.A.R.T section, the program will analyze the state of the HDD and display information about the health of the hard drive. If you see a status other than “OK” in the status, you will need to perform the recovery procedure.

How to restore a hard drive

In the program window, you will see an offer to scan the hard drive, as well as create boot drives. When it comes to troubleshooting a hard drive, there are a few steps that need to be taken. First you need to close all active programs, except for HDD Regenerator, and end the processes. Recovery instructions:

Go to the “Regeneration” section and select “Start Process under Windows” from the list.
In the next window, you need to select the hard drive so that HDD Regenerator starts the recovery procedure, then click "Start Process".
A window will open with user interface based on the input of text commands from the keyboard and the text output of the results. To select the type of scanning and recovery of the disk from the list of available actions, press "2" on the keyboard (Normal scan) and the enter key.
Now press "1" (Scan and repair) and Enter to check and fix the found bad sectors.
In a new window, you need to select the starting sector by pressing "1" and the enter key, after which the scanning process for errors will be launched, the progress of which is displayed in the program window. If errors are found during the check, HDD Regenerator will correct them. The process will take some time. Upon completion of the procedure, the user is provided with reporting information on the work performed (the number of bad sectors, fixed and not subject to recovery).

How to burn a flash drive

The program also offers the option to create a bootable USB stick or disk. To carry out the procedure, we connect the USB flash drive to the USB connector on a computer or laptop and perform the following steps:

In the main window of the HDD Regenerator application, click the "Bootable USB Flash" button.
We select the USB flash drive that should be made bootable (if several USB devices are connected to the device, they will be displayed in a list) and click "OK".
A warning window will appear informing you that all information from the USB drive will be erased, we agree with this by confirming the action with the "OK" button.

At the end of the process, you will have a boot drive where you can copy the program to boot with the possibility of treatment outside the operating system of the computer.

The procedure is similar to the previous one, only to burn a disc, you need to insert a CD / DVD disc into the drive and press the “Bootable CD / DVD” button in the main application window. Next, the required disk is selected and by clicking "OK" the process starts. For application software tools from a bootable drive, be it a USB flash drive or a disk, you need to specify the boot priority from removable media in the BIOS.

Advantages and disadvantages

The HDD Regenerator software solution provides the user with the opportunity to independently deal with problems with the HDD without resorting to the services of service specialists. Among the advantages of the software:

intuitive, user-friendly interface and ease of use (even in the English version).
Russian language support.
Working in OS Windows any versions since XP and file system independence.
The ability to work both in the Windows environment and outside it (using a boot drive).
Recovery of damaged sectors.
View statistics about recovered hard drive sectors.
Monitor HDD status in real time.
Creation of a full-fledged boot device from an optical disc or flash drive.
The ability to pause the process of scanning the hard drive, so that later they will return to the procedure.
Security of the recovery procedure for user data.

The disadvantages include the following points:

The full version of the product is paid.
The absence of the Russian interface in the official release.

At the same time, you can also use free version, its functionality is quite enough for basic tasks, and for those who want to use the program with the Russian interface, it will not be difficult to use the crack.

As you can see, there is nothing complicated in working with HDD Regenerator; you don’t need to study the settings in depth. By using this software you can restore the hard drive to working capacity without much effort in just a few clicks, as well as create a bootable drive, which helps a lot in case of force majeure.