Wi-Fi is enabled on the laptop. Enabling and configuring Wi-Fi on laptops with different versions of Windows

Select a restore point. When making changes to system files, for example, when you install a program or driver, a restore point is created automatically. By default, the operating system will choose the most recent restore point. To see a list of all available restore points, check the "Show other restore points" box.

• Select the restore point that was created when wireless adapter was still working.

Check which programs will be affected by system restore. Since a restore will return settings and files to the date you choose, programs installed or removed after that date will be uninstalled or installed accordingly. To check programs, click Scan for Affected Programs. Recall that the system restore process will not affect your personal files.

Start the system restore process. After selecting a restore point, in the window that opens, confirm that you really intend to restore the system. Windows will restart and restore settings and files. The system restore process will take some time. Upon completion of this process, the operating system will boot, and a message will be displayed on the screen indicating that the recovery was successful.

Try connecting to a wireless network. If the wireless adapter does not turn on due to driver or software, restoring the system to a date when the adapter was still working will resolve the issue. If you still can't turn on your wireless adapter, take your laptop to a repair shop or have it replaced.

Often, users who have purchased a laptop or netbook encounter difficulties when turning on and wifi setup. The procedure itself is quite simple, but in some cases there are various snags and unforeseen difficulties, it is also sometimes required configure router before proceeding to connect wi-fi to the laptop. In this article, we will consider both a standard connection and options for solving such problems.

How to turn on wifi on laptop

Usually, to turn on wifi, it is enough to perform 2-3 simple operations. Which one depends on the model and manufacturer of the laptop. Here are the activation options wifi networks on beeches of the most popular manufacturers:

• On an ASUS laptop, you need to press the combination of the FN and F2 buttons.


• On Acer and Packard bell, hold the FN button and press F3 in parallel.


• On HP laptops, wi-fi is turned on with a touch button with a symbolic image of the antenna, and on some models, with the FN and F12 key combination. There are also models on which a regular button with an antenna pattern is provided for this purpose.


• To enable wi-fi on Lenovo, hold FN and press F5. There are models where there is a special connection switch for wireless networks.


• On laptops from Samsung, to turn on wi-fi, you need to hold down the FN button and press either F9 or F12, depending on the model.

For WiFi connections on laptops various models And different manufacturers its own original key combination can be used. Detailed description For specific model you need to look in the user manual that came with the laptop. The FN button is available on almost all models of modern laptops. With its help connection of various functions and connection of a beech with other devices is carried out. If the laptop does not have an FN button, then a special button or switch is used to turn on the wireless network. As a rule, it is indicated by one of these drawings.

If not found on the keyboard, examine the ends of the laptop, perhaps the switch is on the side. Also take a close look at the bottom of your laptop. There are models in which the switch is located on the bottom cover. Moreover, manufacturers make this button barely noticeable. It almost merges with the body, and you can not see it at first glance. It may be signed by Wireles or Wlan. Turned on wifi with the right button or combination, but it doesn’t work? Wi-Fi needs to be set up on the laptop.

Hidden WiFi switch example

.

Attention: It is worth saying that such switches can be located in the most unexpected places, even on the back cover of a laptop. So if your WiFi does not work, carefully inspect the laptop for which switch.

How to set up wifi on windows 7 laptop

Before setting up, you need to check the availability and connection of drivers. Checking Drivers Checking the driver is to find out if they are on your device at all and whether it is involved in this moment. So in Control panels select item device Manager, which can be hidden inside the item Equipment and sound.

A window opens in which we find Network adapters . Two items must be present: Ethernet and Wi-Fi. One of them should have the word "Wireless" in its name. This is your adapter.

If there is no entry about the wi-fi adapter, or there is an icon with exclamation point on a yellow background, it means you have a driver problem. If there is no entry, then the drivers are not installed and you have to install them from the disk that came with the laptop. Or find it on the manufacturer's website. Without them, wi-fi will not work. If there is an entry, but there is a yellow exclamation mark opposite it, click on this item right click mice. In the window that appears, select "Enable". The reason for the connection difficulties may lie in the fact that the adapter is set to save power. To disable it, right-click on it, then Properties - Power Management, now you need to uncheck the box "Allow the computer to turn off this device to save power."

Now everything is fine with the driver. Turning on the adapterwi- fi . For this, through Control Panel→ Network and Internet go to Network connections. Here we find Wireless network connection. This is the wifi adapter. Right-click to open the dialog box and select Enable. Connecting to an access point. It remains to connect the laptop to the access point. Make sure the access point is active. Find the wi-fi icon in the lower right corner of the screen on the taskbar. When clicked, the network management window will open, select desired network, click Connect.

If the network is protected by a password, the system will ask you to enter it (if you forgot the password from your network, you can find it out in several ways). Only after entering the required password you will be able to use the Internet. If the network is open, the connection will happen automatically. That's all. Turning on and configuring Wifi on a laptop completed. If you once set up wi-fi, then you don’t need to do this anymore, as they will automatically be saved in the laptop’s memory. You will only need to turn it on with the appropriate button or keyboard shortcut. Keep in mind that a wireless connection consumes a lot of power from your device, so the battery will be used quite intensively. Pleasant and simple connections no adventure!

People around the world purchase new models of computers or laptops for their personal use every day. But not all professional users know how to set up its work, install various programs, connect your device to world wide web Internet.

In this article, we will try to consider step by step instructions How to turn on Wi-Fi on a laptop and on a computer. The principle for all laptops is the same, we will look at how to enable Wi-Fi on several of the most common laptop models, as well as separately on Windows. So. Everything is in order.

How to turn on Wi-Fi on HP laptops

At the initial stage, you need to look at the state of the connection to the wireless network on the laptop at the moment. To do this, look at the icons, they may differ on some HP laptop models. The icon can be located at the top of the panel (F12 key with the image of an antenna) or on the taskbar in the lower right corner. If you have an antenna icon and it is lit, then Wi-Fi is connected, if it is not lit, it is turned off. On some models, an “X” may be affixed to the “mast” icon. In this case, the connection is disabled.

Having decided on WiFi connection, if it works, then you can safely go online, if not, then proceed to further actions.

How to enable Wi-Fi on Asus laptops

Wi-Fi module specific control, is distinctive feature this model. Basically, connection and disconnection occurs using a special mechanical switch. The switch is in active mode - Internet access is active, and if it is inactive, it is accordingly disabled.

How to turn on Wi-Fi in Windows

Now let's look at how to access the Internet in Windows. There are several flavors of Windows. You may have installed Windows laptop 7 or 8, Windows XP or Vista. We will focus on two: Windows 7 and Windows 8, as they are the most popular at the moment.

How to turn on Wi-Fi on Windows 7

And so what you need to do to enable Wi-Fi on Windows 7:

1. The very first thing we need to do is go to the "Start" menu and select "Control Panel" there. Select the "Network and Internet" subsection in it. There are also several subsections here, but we need the "Network and Control Center and public access". We find it and go.
2. You will open a separate window, where we find the tab "Change adapter settings" and click on it.
3. Another window opens. Find the label "Wireless network connection". On this shortcut, right-click and in the command "connect / disconnect" that appears.
4. A list of networks will open, where we select the one we need and click connect.

As a rule, the network is protected by a key, so you will see another window where you will need to enter a password in a certain field.

If you did everything correctly, then an icon will appear in the lower right corner of the desktop, indicating that Internet access is active.

How to turn on Wi-Fi on Windows 8

Turn on Wi-Fi on Windows 8:

• As with connecting the network to Windows 7, we initially perform the same steps: "Start" -> "Control Panel".
• After we got to the above tab, select "switch to classic view" and find the "Network Connection Control Center". You will see a list of programs where we find "Wireless Network Connection".
• Next, using the right mouse button, click on the above program and select the "Property" command. This folder should have "Obtain an IP address automatically". If it's checked, then click the "OK" button.
• Then we need to return to the "Network Connection Management" folder. Here again we find the “Wireless Network Connection” and again, using the right mouse button, select the “Connect - Disconnect” command.
• After that, an additional window “Connect to a network” will open in front of you, where we select the network we need and click the “Connect” button.

If you did everything correctly, then the corresponding icon will appear in the taskbar.

How to turn on Wi-Fi on a desktop computer (PC)

And finally, let's look at how personal computer Wi-Fi can be connected. There are no problems with laptops, they use a wireless connection, but with a PC it's a little more complicated. Not everyone wants to pull wires from their computer through the whole house or apartment. There is also a way out of this situation. Must be purchased and installed on your PC wifi adapter.

Your computer uses the following types of adapters:

• External. These adapters are connected to a computer using a USB port.
• Internal. This view is a little more difficult. They are connected to the motherboard via PCI-E 1X or PCI connectors.

Most people prefer an external adapter. Mostly people who rarely use local network. For them, the main thing is to have access to the Internet. There is nothing complicated in its connection. We just need to plug it into the USB port and install the drivers. Each adapter comes with a driver disk. After installing the drivers, we search for a wireless network and connect to it.

The presence of Wi-Fi allows you to use the Internet in a variety of places. But before you can, comfortably sitting in a cafe or on a park bench, plunge into the world of the Internet, you need to deal with your laptop and find how and where to turn on the network on your laptop.

Nothing hard to turn on wireless communication on a laptop, no. You just need to know the function keys to enable wireless communication on your brand laptop, because each manufacturer plays key combinations in its own way. For those trying to understand:

• how to turn on wireless on an Asus laptop, you just need to press Fn and F2;
• the wireless button on an HP laptop is a combination of Fn and F12, or a touch button with an antenna pattern on models where available;
• on Lenovo, press Fn and F5 or a special switch, which is indicated in the instructions;
• Acer and Packard bell turn on the network with a combination of Fn and F3;
• on different models Samsung is either Fn and F9 or Fn and F12.

If the standard combinations are not suitable (another one may be introduced in new models), then attention should be paid to the instructions from the manufacturer, which must indicate all the necessary information related to the functionality of the laptop. In any case, it should be the Fn button, and in its absence, a special button with an antenna pattern or a switch is pressed.

Enabling wireless communication on a laptop in other ways

If the switch is not marked on the keyboard, it can be placed on sidebar or the bottom of the laptop. The buttons located on the bottom are made inconspicuous, so you need to show Special attention to find her there. If neither the combination nor the switch could turn on the wireless network, then most likely the Wi-Fi is simply not configured, and it's time to do it.

How to enable the wireless network adapter?

Any setup begins with checking for the presence of the necessary drivers, which are connected if they are, but not connected, and are first downloaded and installed, and then connected if they are not in the laptop. You can check the drivers through the "Control Panel", the menu item "Device Manager". If this subsection is not immediately visible, then it may be located in the Hardware and Sound section.

From the "Dispatcher" you need to go to "Network Adapters" and find the Wireless section there, which is what you need. It may be that there is no inscription, or it is marked with an exclamation point. This is direct evidence of problems with drivers that will have to be installed first. They must be present on the disk that came with the laptop. If the disk is lost or for some reason the installation fails, you can search for them on the manufacturer's website.

If there are drivers, but marked with an exclamation mark, then you need to right-click on this icon and select the appropriate item in the menu that appears. Usually it is the phrase "Engage". You may need to turn it on additionally if the adapter is connected to the power saving mode.

You can eliminate the savings factor in windows menu 7 in the "Properties" section, where there should be a "Power Management" subsection. It has a checkmark on the item "Allow shutdown to save."

After unchecking the box, the drivers will work, and the connection can be made by standard keystrokes. If the above manipulations did not bring results, the laptop should be shown to a specialist - it may be damaged.

strana-sovetov.com

How to turn on the wireless network on a laptop

Wireless network Wi-Fi is the ease and convenience of browsing the Internet anywhere you have access to it. But sometimes many are faced with the problem of connecting a laptop to WiFi networks. In most cases, it is easy to fix, but sometimes you have to make certain adjustments.

Wireless Internet in some laptops is turned on using the button with the image of the antenna. You should look for it on the body of the device.

Most new laptop models do not have a separate power button. Then the wireless Internet must be turned on by pressing a specific key combination:

• Asus - "Fn" - "F2";
• MSI - "Fn" - "F10";
• Acer - "Fn" - "F3";
• HP - "Fn" - "F12";
• Lenovo - "Fn" - "F5";
• Samsung - "Fn" - "F9" or "Fn" - "F12".

If an external adapter is used to connect to the network, then it must be connected to the laptop via a USB port.

If the laptop has a built-in Wi-Fi adapter, then in order to connect to a wireless network, you need to turn it on in windows settings. To do this, press the "Win" - "R" keys, then enter "ncpa.cpl" in the window. Under "Change adapter settings" (or "Network connections") is "Wireless network connection". If it is gray, then you need to right-click on it and select "Enable".

Due to a failure, the Wi-Fi adapter may be disabled in the Device Manager. If this happened, then in Network connections» The Wireless Network Connection icon will not appear. To fix this problem, you need to press the "Win" - "R" keys, enter "devmgmt.msc" in the pop-up window. In the "Device Manager" select the "Network adapters" section and find wifi device or wireless. Right click on it and select Enable. If it was not possible to turn on the device, you need to download and install drivers for the Wi-Fi adapter.

Sometimes you need to enter the network settings yourself, which works in stealth mode. To do this, you need to open the "Network and Sharing Center", select "Manage wireless networks", "Add" and then "Create a network profile manually". Enter the required parameters in the table, click "Next" and "Connect".

Sometimes you can find laptops in which, in order to connect to a wireless network, you first need to launch the “Wireless Assistant” or “Wi-Fi Manager” utilities located in the Start menu. After that, you can freely turn on Wi-Fi.

SovetClub.ru

Enabling and configuring Wi-Fi on laptops with different versions of windows

Laptop owners usually use a wireless connection to access the Internet, since there is a Wi-Fi adapter on all laptop models without exception. However, in order to use it, sometimes you have to figure out how to turn on wifi on a laptop.

Hotkeys or hardware switch

The first step is to physically turn on the Wi-Fi adapter. On different laptop models, this procedure is slightly different, but its meaning is the same: you need to find a hardware switch or use the function keys. Let's look at a few examples:

You can continue the options for enabling Wi-Fi for a long time, giving ways for MSI, Acer, Samsung and other brands. Even different series of the same manufacturer have different ways to activate the wireless module, therefore:

• Inspect the laptop case for a hardware switch or Wi-Fi enable button.
• Examine the keyboard - one of the keys in the F1-F12 row should be marked with a wireless icon. If you press it together with the Fn button, the adapter will turn on or off.

If you have a series laptop Sony Vaio, then there may be no hardware key or Fn button on his keyboard. For wifi work in this case it is required special utility VAIO Smart Network, which can be found on the official website of the manufacturer.

Fn button not working

What to do if the Fn button does not work? How to turn on the adapter in this case? First you need to figure out why the key does not work. Fn runs under BIOS control and has its own utility, without which the key does not function. Therefore, if the button does not work, you first need to find a utility for enabling hot keys on the manufacturer’s website for a specific laptop model (the name should contain the word “HotKey”).

If the installation of the utility did not help or the key was physically damaged, then you will have to use an alternative method to turn on the adapter. On windows 8 and windows 10, to turn on the adapter, just click on the Wi-Fi icon in the notification panel and move the "Wireless Network" slider to the active position. If the adapter drivers are installed correctly, then the icon must be there.

There is no such function in windows 7, but you can try to enable the wireless connection through the window for changing adapter settings (this is described below). If this method did not help, then you will have to look for an external keyboard with working key Fn and then do not turn off the Wi-Fi module again.

Setting up Wi-Fi on different versions of windows

With the physical inclusion of the module, you will figure it out quickly enough. Sometimes on this WiFi setup ends: the system performs the remaining necessary actions on its own, displaying a list of available wireless points. But sometimes you have to establish a connection manually.

Regardless of the windows version, you first need to check that the Wi-Fi module drivers installed without errors:

To be sure, it is better to go to the official website of the laptop manufacturer and find latest version wireless network module driver for your model. In addition, right-click on the adapter and select "Enable" (if it is stopped).

windows xp

In theory, windows XP should have been discontinued a long time ago, but on some older Dell models and other laptops, the legendary system still continues to perform its functions. WiFi in windows environment XP is configured as follows:

1. Check that the Wi-Fi indicator on the laptop is on (that is, you have turned on the adapter and installed the drivers).
2. Open the Control Panel.
3. Find the "Network Connections" section.

There should be a "Wireless Network Connection" icon in the File Explorer window. Its presence demonstrates that the Wi-Fi module is working correctly. Right-click the icon and select Enable. Further:

If the list of available points does not contain the network that your router distributes, click "Update list". Then select the desired point by name and click Connect. If the network is password-protected, you will be prompted to enter an access code, after which the connection will be established.

windows 7

On windows 7, the procedure for connecting to a wireless network has changed slightly, becoming a little easier. Now all available networks are displayed after clicking on the Wi-Fi icon in the system tray. But if there is no icon, then:

1. Go to the Network Sharing Center.
2. Click "Change adapter settings".
3. Find your wireless connection and make sure it's turned on.

After enabling the wireless connection, the Wi-Fi icon will appear in the tray. Click on it to see a list of available hotspots, select a network and click Connect.

windows 8

On windows 8, the procedure for connecting to Wi-Fi remains the same, but the “Airplane” mode has been added, with which you need to be able to work. If the adapter driver is installed and the wireless connection is working correctly, then you will see the Wi-Fi icon on the notification panel, when you click on it, a list of available networks appears.

If there is no icon, follow the same steps as on windows 7 - open the "Change adapter settings" window and turn on the wireless connection. If there is no wireless connection itself, check the drivers and the status of the module - everything should be enabled and installed.

If the adapter is turned on, the drivers are installed, but there are no available networks, check that the Airplane mode icon is not hanging in the notification panel. If it is, you need to disable this mode. To do this, click on the icon and move the slider to the "Disabled" state.

windows 10

On windows 10, everything remains the same with a few changes, so you will quickly figure out how to connect a laptop to Wi-Fi:

1. Click on the wireless connection icon in the tray.
2. Select the desired network.
3. Click "Connect" and enter your password.

If the access point is not displayed, try setting network settings. Click on the link of the same name - the "Network and Internet" section will open windows settings 10.

Here you are interested in two tabs:

• Wi-Fi - Make sure your wireless network is turned on.
• Airplane mode - make sure the mode is disabled.

You can go to the adapter settings section and turn on the wireless connection. Simply put, on windows 10 you have several equivalent options - you just need to choose a more convenient way for yourself.

Problems connecting to a wireless network from a laptop often occur even for experienced users, and beginners do not even know how to approach the settings. Therefore, we decided to consider this issue in more detail. In the article we will understandhow to turn on wifi on laptop, while providing a connection algorithm for different types operating system. We will also find out what are the main problems users face and how to solve them.

First of all, let's figure out how to activate the Wi-Fi module on the device. Without this, you will not be able to use wireless communication and set up a connection. Usually, the inclusion depends on the laptop model and varies slightly in each specific case. Certain function keys are involved in the process.

• For an ASUS laptop, this is FN + F .
• If your gadget is called Acer or Packard bell, then you need to press FN + F3.
• Gadget from HP turns on the WiFi module with a dedicated touch button marked with an antenna icon or FN+F12 . A number of models from this manufacturer have a simple button with an antenna to activate the wireless connection.
• Lenovo - FN+F5 if there is no dedicated button.
• Samsung - FN + F9 or FN + F12, depending on the model.

We have listed the most common manufacturers of equipment. If your laptop is manufactured by another company, then the desired combination can be clarified in the instructions for the gadget or on the company's website. Usually this function key FN, which is available on all modern laptops and an additional one from the F1-F12 series.

If the button to turn on is dedicated, then you can search for it in a separate block or even on the ends of the case. Usually it is indicated by the corresponding icon associated with the signal distribution.

Wi-Fi settings depending on the OS

Now let's talk about those inclusion methods that are intrasystem. Simply, how to enable a wireless network connection in operating system. We will analyze the two most common, by analogy, you can make settings on other versions of Windows.

Windows 10

How to turn on wifi on laptop, if everything is in order with the settings, the answer to this question is no less important than turning on the module. So, we bring to your attention a step-by-step algorithm for the tenth version of the operating system.

That's all. As a result, the laptop will connect and you will be provided with Internet access.

Windows 7

We also consider the setting for this version, provided that the system is equipped with the right drivers and has a network adapter. That is, all the nuances are technically observed and the WiFi module is turned on.

In the case of this version of the OS, everything is much simpler. You can simply click on the Internet connection icon in the lower right corner and select the desired network from the list of available wireless connections. Enter the password and wait for the connection to be activated. That's all.

What to do if you can't connect

Often there are situations in which, when the above algorithms are executed, the connection to the network is not performed. In this case, two options are available:

• disabled WiFi adapter;
• required drivers are missing.

Don't be afraid. In both cases, the issue is not as terrible as it seems, and everything is completely solvable.

The seventh version of the operating system

For the seventh Windows versions the verification algorithm will be the following.

The absence of an entry or the presence of a yellow sign next to the inscription means there are problems with the drivers for the adapter. In this situation, you will have to reinstall them from the disk provided with the laptop or the official website of the manufacturer. In any case, the process is simple, just download desired programs and reboot the computer, the system itself will distribute the software to the required location and activate it.

If there is a yellow icon, then click on it and in the menu that opens, click the “Enable” command. Then right-click on the adapter and in the "Properties" section select "Power Management" and in the option to turn off the adapter in power save mode, uncheck it if it is.

Turn on the adapter in "Network Connections", here find the wireless connection and click the "Enable" command next to it. On this, all the problems in Windows 7 that the user can solve on their own have been fixed, and if the problem remains, then the matter is in the technical component and it is better to contact a professional.

Tenth version of Windows

If you have a "Ten", then, solving the issuehow to connect wifi on laptop, you should also rule out problems with the adapter and drivers.

If the icons for connecting to Wi-Fi are not found on the taskbar, then the adapter is disabled. To be able to connect to the Internet, you must first enable it.

If there is no “Wireless Network” icon at all, then we go to the first section of our article and read how to enable WiFi hardware.

To check the driver, you need to right-click on an empty spot on the taskbar and in context menu select the "Settings" section. Then in the main section, select "Devices" and go to "Device Manager". Expand the "Network adapters" block and look for an entry with the word Wireless. If the icon is supplemented with an exclamation point, then the driver is not working correctly and needs to be reinstalled. If after downloading new drivers the problem is not resolved, then it is also worth contacting a professional.