Apple devices are different high level reliability. Errors in them occur very rarely, "glitches" occur infrequently. Thanks to this, they have earned the honorary title of the most reliable and error-resistant smartphones / tablets. However, in some cases, errors still occur, which leads to incorrect operation of devices. What to do if the iPhone or iPad starts behaving incorrectly or stops loading altogether? How to enter recovery mode on iPhone or tablet?
In this article, we will look at:
- How to start recovery mode on iPhone and iPad;
- How to enter DFU mode;
- What is the difference between Recovery Mode and DFU mode.
After reading this material, you will receive maximum information about restoring the functionality of Apple devices.
We have already talked about restoring iPhone and iPad through DFU mode many times. Now we need to learn a new term - recovery mode (or recovery mode). It allows you to get rid of errors in the functionality of smartphones / tablets and perform a factory reset. How is it different from DFU mode?
The main difference is that user data in internal memory remain safe and sound. Also, the recovery mode is characterized by the following differences:
- Components and modules of the operating system are rolled back to factory settings, but are not recreated;
- All parameters are reset to the factory state;
- Integrity check in progress file system– the devices are preparing to start up correctly.
The same DFU mode provides complete removal all user data full formatting internal memory and the re-creation of modules and components - that is, it happens, as it were, complete reinstallation the entire operating system.
Despite the security of the recovery mode, you still need to create backups before entering this mode - you never know what can happen to important data.
Entering iPad and iPhone Recovery Mode
We have already talked about how to enter DFU mode and restore the operating system to its original factory state. To do this, hold down the power key and the home key, wait 10 seconds, release the power key and continue to hold the home key for another 10 seconds. Next, release the key and go to DFU mode - all this time the smartphone / tablet must remain connected to the computer.
Please note that when you enter DFU mode, iTunes must be running on your computer, which will be responsible for restoring your device. It will recognize the device connected in DFU mode and prompt you to perform the appropriate actions.
To enter recovery mode on an iPad or iPhone (Recovery Mode), you need to follow a different procedure. First, turn off the device completely - its screen should turn black.. Next, click on the "Home" button and connect the smartphone / tablet to the computer. After a couple of seconds, the iTunes application icon will appear on the device display - the recovery mode is activated. By clicking on the appropriate button in iTunes itself, you will start restoring the operating system.
Here we see another difference between recovery mode and DFU mode - in the contents of the screen. If you enter DFU mode, the screen will be black, and iTunes will notify you when you are in this mode. In Recovery Mode, the iTunes application icon will be displayed on the screen with the cable connected. In addition, when entering recovery mode, iTunes on the computer must be turned off - launch it after the logo of this application appears on the screen.
How to get iPhone out of recovery mode
Putting your iPhone in these modes does not void your warranty, so you can use these modes as many times as needed. But what if you suddenly change your mind about returning the device from Apple to original state? How to get iPhone or iPad out of recovery mode? This is done literally with the click of a button. The main thing is to think about your actions before the start of recovery, and not during the procedure.
To exit recovery mode, disconnect your iPhone from your computer and press the power button. Hold the button for 10 seconds until the smartphone goes to reboot. After that, it should start in normal mode, ensuring that the operating system starts. Exit recovery mode on the iPad in the same way.
Don't stop by any means running recovery- by doing so, you will harm your gadgets and damage the operating system.
When you try to restore your device, an unpleasant thing can happen - your phone or tablet will go into eternal recovery mode. How to enter and exit the iPhone from DFU Mode will be described below, but first you should understand what this mode is and why it is needed.
What is DFU Mode for and how to enter it?
DFU is a special mode that is used for emergency updating, flashing or booting a device from backup. It is used if the phone or tablet freezes and does not respond to commands. DFU Mode works in tandem with a computer iTunes, with the help of which all operations for managing the firmware are performed.
Why the device may freeze
But if some failure occurred during an emergency update or device recovery, then your gadget will face an eternal reboot. It looks like this: the device tries to turn on, but at some point it encounters an error in operating system and cannot overcome it, this problem causes the device to switch to recovery mode on its own. If in this situation you try to get the device out of DFU Mode, it will start to boot, again stumble upon an error and, accordingly, return to DFU Mode again. This cycle is called the Recovery Loop.
Reason for the above problem the following situations may become:
- Incorrectly loaded firmware. If the files iTunes programs have been corrupted or have not been updated to latest version, or the Internet connection was lost during the download process, then IOS for your phone or tablet might not download correctly.
- The restore or update process was interrupted before it was completed. The USB cable may have been removed too soon, or the device may have run out of charge too soon.
- If you have tried downgrading your device's firmware, this could also be the cause of the recovery loop.
- Perhaps the device itself was damaged: the error lurked in the operating system, or the inside of the phone or tablet had physical flaws.
How to Enter iPhone or iPad in DFU Mode
To get started, connect your phone or tablet to your computer with a USB cable and disconnect it, and then use one of the methods below to enter DFU Mode.
How to switch to mode by holding the Home + Power buttons
Transition by alternately pressing the "Lock" and "Home" buttons
The result for both options should be a message from iTunes on the computer screen, stating that a device is connected to the computer that is subject to forced recovery. Remember that nothing should be displayed on the screen of the phone or tablet, there should only be a black solid screen throughout the entire process.
Output iPhone, iPad, iPod touch from DFU
If the device is not in an eternal reboot and no errors occurred during the recovery or update process, then a simple reboot will help: pick up your tablet or phone and hold the Home and Lock buttons for 10 seconds. Done, the device will automatically restart and return to normal operation.
Through special programs
If your device got into the so-called "recovery loop", that is, after each reboot, it returns to DFU mode on its own, then there is only one thing left - to use third-party computer programs that will help you deal with the problem.
TinyUmbrella
- Connect the computer to the device using a USB cable.
- Download and install the program from the official website of the developer - http://blog.firmwareumbrella.com. The site has installer files for both Windows and Mac OS.
- Put your device in DFU Mode. The instruction describing this process is higher in the same article.
- Wait until the program detects your phone or tablet in recovery mode and the Fix Recovery button becomes active. Click on it.
- You will be asked if you really want to fix the recovery process. Confirm the action. After that, wait a while, the device should turn on by itself in normal mode.
- The recovery loop exit process is complete, but there are two more useful buttons for the program you are using. The first - Enter Recovery, allows you to transfer the device to DFU Mode without using buttons. It can come in handy if the physical buttons are faulty.
- The second button - Exit Recovery, allows you to exit the recovery mode without using the device buttons. But this method only works if the device is not in an eternal reboot loop.
red snow
Video: How to get your device out of the recovery loop with RedSnow
RecBoot
What to do if you can't exit DFU mode
If the use of the above programs did not help, then one thing remains - try to restore again through iTunes. But this time everything should pass without errors, otherwise the problem will not be solved. Before starting the operation, charge the device by 60-100% so that the process is not interrupted at the most inopportune moment.
Exiting DFU - step by step
If none of the above methods helped you, including re-flashing through iTunes, then one thing remains - take the device to a service in order to get the help of a qualified specialist. Perhaps the insides of the gadget were damaged, in which case you will have to pay extra and replace them with new ones, of course, if the warranty for the device has already expired. But before taking your phone to the nearest service, contact Apple Support, perhaps they can give you the right advice on how best to proceed in this situation - https://support.apple.com/ru-ru.
So, the device can be transferred to DFU Mode in order to perform a forced recovery or firmware update. But if this process is interrupted or carried out incorrectly, then the phone or tablet can go into eternal recovery mode, returning to DFU Mode from time to time after a reboot. In this case, a normal reboot can help you, third party programs or re-firmware in compliance with all the rules. If all else fails, we contact Apple Support and the official device repair service.
Articles and Lifehacks
Often, when trying to improve his mobile phone, the owner of the device is faced with the fact that the device breaks down or freezes at a certain stage of loading. Therefore, it is important to know how to get iPhone out of recovery mode, because otherwise you will have a non-working device on hand.
Basic Ways to Exit Recovery Mode
There are several methods to exit recovery mode Mode:
- Reboot. If you see the USB wire icon reaching for iTunes, reboot the device by pressing Home and Power at the same time, hold the buttons for 15 seconds. Then start the mobile phone in the usual way.
- When you get into the Recovery Loop, you should use special utilities. Download TinyUmbrella, iReb or RecBoot.
- Restore your device using iTunes. The big disadvantage of this method is the erasure of all information contained in the cell's memory.
Using the TinyUmbrella App
TinyUmbrella is one of the effective programs. To use it you need:
- Download and install the latest version.
- Launch the application, then connect the phone to the PC via a USB cable.
- On the left side of the application, you will see the inscription Recovery Devices and the numbers 1114116, next to which there may be a question mark.
- Click on an unidentified device, in this case it is a digital dial.
- On the right side of the utility, select Exit Recovery.
In the event that the application cannot detect the mobile phone, then install iTunes and perform the same steps. You can also use the RedSn0w utility.
In all other cases, it is advisable to turn to professionals for help, because only they will be able to identify the true cause of the cellular malfunction and return it to working condition.
After all, you see, the iPhone is not a cheap mobile phone, and in terms of functionality it is ahead of some models from other manufacturers.
Problem solving in a couple of clicks.
Although iPhones are recognized as smartphones that have a minimum of software bugs and problems, they still happen. Yes, there are not as many of them as on Android smartphones, but this is clearly not easier for iPhone users who find themselves in a problem situation. What to do if your iPhone is stuck in recovery mode, constantly restarting or not turning on at all after one of these bugs occurs? In this review, we will talk about a truly life-saving utility iMyFone Fixppo for Windows and Mac, which solves any such problem in a couple of clicks.
The iMyFone Fixppo utility has the ability to fix various software failures on iOS devices. The program not only allows get iPhone and iPad out of recovery mode but also deal with many other problems.
For example, the Apple logo is stuck on your iPhone and nothing helps to get rid of it. Or the iPhone went into a cyclic reboot, not allowing it to be used normally. Or the iPhone simply does not turn on, not responding in any way to pressing the Power button. The iMyFone Fixppo utility handles all these issues.
How to get iPhone out of recovery mode using iMyFone Fixppo utility?
Let's start by looking at the common problem iPhone and iPad users - device freezes in recovery mode. Most often, this bug occurs when installing a new iOS versions. Moreover, you can “catch” the eternal recovery mode even with a secure installation of iOS over the air - it is not necessary to use iTunes for this.
Understanding that your iPhone or iPad is stuck in recovery mode is very simple - the iTunes logo is displayed on the device screen. Rebooting the device in such cases does not always help. In most cases, after a reboot, the depressing iTunes logo reappears on the screen.
iMyFone Fixppo saves iPhone and iPad from perpetual recovery mode with just one click. Previously, we reviewed many similar utilities, but so easy way never seen a solution to the problem before.
In order to get your iPhone or iPad out of recovery mode in the utility, just select the item Enter/Exit Recovery Mode and connect your device to your computer. The program automatically detects a device in recovery mode and allows you to restore it to a working state by pressing one button.
It takes less than 30 seconds to get your iPhone or iPad out of recovery mode. After that, the device immediately turns on, and the utility itself signals that the process was successful.
This mode allows you to enter the device into recovery mode. This option can be useful if you want to perform a "clean" install of iOS on your iPhone or iPad.
iPhone won't turn on, Apple logo stuck, black screen, constant reboots? Any problem is easily solved
Others, including more serious ones software errors on iPhone and iPad are also solved using the iMyFone Fixppo utility. To do this, the program has a Standard Mode, which is responsible for fixing a lot of various software failures.
The utility is able to fix popular problems related to:
- stuck on the screen with the Apple logo,
- the occurrence of cyclic reboots,
- the inability to turn on the iPhone or iPad,
- device freezing with a completely black or white screen.
In all of the above cases, the Standard Mode which is also easy to use.
We tested this rescue mode on iPad Air, which lay idle for several weeks with the Apple logo hanging on the screen. First of all, the utility automatically determines the device model and its firmware number, which is immediately offered to be downloaded. A very convenient option, because desired firmware no need to search on third-party resources and worry about what desired version iOS may not be suitable for a specific device.
After the firmware is downloaded, all that remains is to press the button Start and enter the device in by following the instructions on the screen. The utility itself “understands” what happened to your device and, again, in automatic mode solves the problem. At the same time, which is very important, the program warns whether the recovery will be performed without data loss or whether the problem turned out to be so serious that data deletion cannot be avoided.
It took only 15 minutes to rid the iPad Air of the hung Apple logo, of which 5 minutes were loading the firmware. Then the tablet was ready for full-fledged work. Moreover, the recovery took place without the loss of any data - all information and applications remained in place.
Fixing iTunes Errors
Many iPhone and iPad users choose not to use iTunes due to its complexity and possible occurrence of various strange errors. For example, iTunes may tell you - "Error 14 occurred while installing iOS" and calm down. The utility from Apple does not tell any recommendations for further actions.
Fortunately, iMyFone Fixppo is able to fix all the most common mistakes iTunes that users may experience. Responsible for the recovery is the same Standard Mode, which requires just a few clicks to start.
"Expert Mode": reset password on iPhone and iPad, solve complex problems
iMyFone Fixppo also has a special expert mode that allows you to get rid of the most difficult problems with iOS devices. For example, if the iPhone or iPad has turned into a "brick" as a result of installing new version iOS and does not want to recover to any. Even using the standard mode of the iMyFone Fixppo utility.
When using expert mode, it is important to understand what its use implies full reset device during a restore operation. In other words, the iPhone or iPad is reset to its factory state. However, when the gadget just lies and does not even turn on, the main task is to restore its performance.
This is what the regime does. advanced mode. Initially, it, like the normal mode, determines the device model and downloads the necessary firmware for it. If the firmware was downloaded by the utility before, while using the normal mode, then you do not have to download it again.
Then all that remains is to enter the iPhone or iPad into DFU recovery mode by following the on-screen instructions. Further, the utility does everything itself, namely, it finds out the cause of the failure and eliminates it. 15-20 minutes and the device "comes to life".
An important feature of the expert mode is the ability to reset the password on the iPhone or iPad. It is important to note that all data is deleted from the device along with the password. In addition, after resetting the password, the device will require you to enter your Apple ID password. If you, as the owner of the gadget, have this data, then reset the forgotten or accidentally set password won't be difficult.
Outcome
iMyFone Fixppo is an excellent utility that can help out in a variety of situations. It is very effective, yet extremely easy to use. Due to this, even inexperienced users can save money and bring their iOS devices back to life without having to go to service centers.
Sometimes iPhone owners may encounter a very unpleasant situation, which is called the Recovery Loop or recovery loop. It consists in the constant presence mobile device in recovery mode. Today we will look at several ways to solve recovery loop problems.
Any owner of an apple mobile device can face Recovery Loop. This problem occurs when the smartphone or tablet is handled carelessly during the process of updating or restoring the firmware. Users may also experience a recovery loop after forced reboot iPhone in Recovery Mode or downgrading its firmware.
How to get a smartphone out of permanent Recovery?
The easiest way to solve this problem is to use one of the applications - redsn0w or TinyUmbrella.
UsageTinyUmbrella:
1. Connect your smartphone to your computer with via USB cable.
2. Launch the TinyUmbrella app. There are versions for and for .
3. Enter iPhone in DFU Mode (instruction at the bottom of the page).
4. In the app, click the Fix Recovery button after TinyUmbrella detects your device.
5. Confirm the action.
6. After that, the application will turn off the device and you can turn it on normally.
The TinyUmbrella app also allows you to enter and exit your smartphone in Recovery Mode without using a forced restart or iPhone buttons.
Usageredsn0w:
1. Connect your iPhone to your computer.
It is worth noting that this application is no longer supported and can only be downloaded from the developer's website. But if you decide to use it, then you should do the following:
1. Connect your smartphone to your computer.
2. Run the utility.
3. Click Exit Recovery after the program detects your iPhone.
4. Wait for the reboot.
The most recent method that we will consider does not involve the use of specialized programs. It is the most cardinal and allows you to surely take your smartphone out of the recovery loop.
This method is a full firmware recovery via iTunes in DFU Mode. We already this method restoring iOS, and you should be aware that in this case you will lose all saves and data from the device’s memory.
How to switch to DFU mode:
1. Connect the device to the computer.
2. Turn off your iPhone, iPad, or iPod Touch.
3. With the device turned off, press the Home and Power buttons simultaneously.
4. Keep both buttons pressed for 10 seconds.
5. After 10 seconds, release the “Power” button while continuing to hold the “Home” button pressed.
6. Hold down the Home button until the computer recognizes the iPhone in DFU mode.
Loading...