It is often necessary for educational or production purposes to have another OS in one computer and install, for example, Ubuntu on top of Windows 7, and eventually you need to remove the linux-like system.
However, if you use boot disk Windows 7 and boot the computer from it, then a recommendation will appear to reinstall Windows 7. In this case, you need to click on the line below "System Restore".
After that, a menu will appear in which you need to click on "Next". In the "System Recovery Options" menu that opens, click on "Command Prompt".
A black console window will open: 
How to remove Ubuntu from Windows 7 boot menu?
On the line you need to write the following:
- Bootrec.exe /FixMbr is a command that brings the main boot record to the system directory;
- Bootrec.exe /FixBoot is a command that adds a new boot sector to the system directory.
After completing these steps, the computer will immediately boot Windows 7, and Ubuntu will no longer bother. However, debris may remain in the computer.
How to remove residual "artifacts" of Ubuntu or any other OS?
There are the following solutions to the problem, with the removal of garbage left over from an unnecessary system, be it Ubuntu or an old Windows:
- Through the "Start" you must enter "msconfig". This will result in a standard Windows utility 7, which is used for the purpose of OS configuration. Here you need to enter the "Downloads" and activate the line "Use by default" for the system that you want to leave.
Then in the "Control Panel" you need to sequentially go through the chain: "All Control Panel Items" - "System" - " Extra options system" - "Advanced" - "Download and restore", where at the top there will be an inscription "Download operating system”, Under this inscription, it is required to remove the “daws” from 2 points.
These actions allow you to remove Ubuntu from the OS boot menu.
However, if the user does not have sufficient experience with "bcdedit", then it is recommended to contact a more experienced user.
For convenience and speed up the process, it is recommended to select and copy identifiers from a large number of characters (in the example above, c7e6848 ... is the identifier of Ubuntu, which is being deleted), so as not to type them manually. To accomplish this, it is required to command line click right click mice.
This will display context menu, where you need to click on "mark". Next, a flickering cursor will appear on a light background, with arrows "right", "left", "up", "down". With it, you can perform the necessary transition. To select text, hold down the "Shift" button and the "right" arrow. Then, by calling the context window with the mouse, copy and paste the text where necessary with a similar action.
WindowsTune.ru
Safe removal of Ubuntu from under Windows
It happens that in order to solve certain problems, you need to install Ubuntu on top of the Windows operating system on your computer. After a while, the need for it may disappear, and then you already need to remove Ubuntu so that it does not affect Windows in any way. Just with this question, many users have difficulties. In this article, we'll take a detailed look at how to safely uninstall Ubuntu without uninstalling Windows. Let's figure it out. Go!
If you try to insert a Windows boot disk and boot from it, you will see a prompt to install Windows on the screen. In this case, you must select the "System Restore" item.
After the command line window appears on the screen, write the following commands:
The first one makes a boot entry in the system directory, and the second one makes new sector downloads.
Executing these two commands will cause the PC to immediately boot from Windows. But you need to get rid of the residual files (artifacts) of Ubuntu. More on this below.
There are several ways to solve this problem. The first is that you need to call the "Run" window, using the Win + R hot keys, and then write the "msconfig" command. Next, go to the "Download" tab and activate the "Set as default" item for the OS you want to keep. Then go to the "Control Panel" and select the "System" section. In the window that opens, open the "Advanced" tab. Below in the "Download and Recovery" section, click on the "Settings" button. Remove the checkboxes from the items "Display a list of operating systems" and "Display recovery options". Click OK.
Now enter the command prompt mode with administrator rights and run the command:
With this system utility you will be able to uninstall Ubuntu from the operating systems boot menu. Right-click on the Ubuntu identifier, after which a context menu will be displayed, and in which you must select "Mark". Then a flickering cursor with arrows "right", "left", "up", "down" will appear. It is used to move. To select text, press and hold the Shift key along with the right arrow key. Next, by calling the context window, copy and paste the text where necessary with the same action. If you are an inexperienced user, it is better not to resort to the bcdedit application, so as not to create additional problems. If you are confident, go ahead.
Now you know how to remove Ubuntu from under Windows 7 or Windows 10. Write in the comments if you managed to cope with this task, tell other users about your experience, and ask any questions on the topic of this article.
NastroyVse.ru
Removing Ubuntu
Yes, you read that right... Today I really will tell you how to safely remove Ubuntu from your PC. For some reason, all blogs bypass this topic: obviously, their authors do not expect the user to have such a situation, but it may well be autistic.
Why uninstall Ubuntu? There are many reasons, but the most common is “didn’t like it”. We are all different personalities with our individual needs, and what many like, someone may not like. And if so, then a person has a real need to remove Ubuntu.
First of all, we will make some reservations...
First disclaimer: Ubutu is installed along with some edition of Windows. After all, if only Ubuntu is installed, then you don’t need to delete anything - you just install a new OS, erasing all data from the “hard drive”.
Second disclaimer: we are uninstalling Ubuntu to revert to a configuration with only one OS (Windows) installed on the PC. The main goal is to remove the grub bootloader, which prompts you to select one of the installed OS.
Attention: transfer all the necessary data from the partitions with Ubuntu to the partitions under Windows control. Backup also not redundant.
Make sure you have a Windows installation disc before performing an Ubuntu uninstall operation.
We insert the installation disk into the drive and wait until it boots up to a window in which it will offer to restore Windows from the command line. We choose this option. Then we execute only three commands:
Fixboot fixmbr exit
After that, the PC will reboot directly into Windows (we removed the OS selection menu for booting). Then you are left with standard means Windows change partitions with Ubuntu or format them to a file system that Windows "understands".
The whole process also begins with booting from the Windows 7 installation disk, after which we select "System Restore", after which we will be offered a list of installed systems MS family. Then select "Startup Repair". Everything, it remains to reboot and make order with linux partitions.
Other versions of Windows OS
I did not consider them for two reasons: the very low popularity of these operating systems and my ignorance in these operating systems.
Note: Never do this on production machines. After all, admins or an organization that provides IT services can be great "rejoiced."
ubuntueasy.com
Removing Linux from a Computer
If you have installed Linux and then realized that you are not yet ready to work in an unknown environment, then you will definitely have a question about how to get rid of the new system. Let's see how to remove Linux if it was installed next to Windows or was the only installed system on the computer.
Removing Linux
The easiest way to get rid of Linux is to install on top of Windows by formatting the disk. Consider the procedure on an example Windows installation 7 (you can read more about this in the article how to install Windows 7 from a flash drive). After selecting the type of installation and accepting the license agreement, the wizard will prompt you to specify the partition on which the system will be installed.
You can partition the disk again or use existing partitions. In any case, after Windows installations there will be no traces of Linux left on the computer. Instead of Windows, you can install another version of Linux. The principle is the same: during installation, you must re-partition the disk, deleting all old data.
Removal in a Windows environment
If you have a Windows system installed, then to uninstall Linux, you need to delete the corresponding sections hard drive. It is done like this:
Deleting a partition will destroy all the information that was stored on it. Therefore, if you had any important files on Linux, transfer them to a USB flash drive or transfer them to those partitions that are used by the Windows system. After deleting partitions, unallocated space will appear. To start using and Windows environment, you need to expand one of the remaining partitions by adding free space to it.
- Right-click on the section you want to expand.
- Select the "Expand" option.
- Specify the volume to add to the existing partition.
It is not necessary to expand an existing volume - you can simply create a new partition by assigning it a different letter. In any case, the main difficulty awaits you ahead - after the reboot windows computer will not start. The reason is described above: along with Linux, the bootloader was removed. You can fix this error using the Windows installation disc.
Bootloader Recovery
We have already discussed in detail how to restore Windows startup 7. Let's try to apply the acquired knowledge to solve a specific problem - after uninstall linux Windows won't boot.
- Connect the installation USB flash drive (disk) with the distribution kit installed Windows.
- Go to the "System Restore" section.
- Select the Command Prompt tool.
To restore the bootloader, you need to enter two commands. After entering each command, do not forget to press Enter:
- bootrec /fixmbr Creates a boot record.
- bootrec /fixboot - writes a new boot sector to system partition.
The Windows bootloader is restored, no more problems should arise when trying to start the system. If you decide to install a different version of Linux, then the whole story will repeat itself: the Windows startup parameters will be written in the common bootloader of the two systems.
Finally, some theory.
Deleting a boot entry is not a mistake. It's a consequence Linux installations next to Windows.
Linux during installation sees that there is a second system, and lists it so that users can choose which environment to boot into when they turn on the computer. When you remove Linux, you also erase the bootloader program that stored the bootloader. Windows entry. Therefore, you then have to use the installation disk to restore the boot.
mysettings.ru
How to remove Linux installed next to Windows and return the bootloader of the latter
Previously, the pages of the site described the process of installing Linux next to Windows using the Ubuntu distribution as an example. In this article, we will look at the reverse process, which sooner or later will have to be resorted to by those users who do not like Linux. How to uninstall Linux installed on one Windows machine? How to return Windows bootloader?
To completely get rid of Linux, you need to restore the Windows bootloader, delete Linux files and resolve the issue with the future fate of the disk space that was allocated for installing this operating system (the swap partition and the partition with the files of Linux itself). Below we will consider 3 ways to remove Linux and return the Windows bootloader. Two of them are methods for computers based on a regular BIOS, they will differ in the tools used. The third way is to remove the Linux bootloader from the boot list of computers with a UEFI BIOS. All the operations described below are carried out inside Windows.
1. Bootice Utility and Windows Disk Management
For the first way to remove Linux and restore the Windows bootloader, you will need two utilities - a third-party free Bootice and a regular diskmgmt.msc (disk management).
1.1. Restoring the Windows bootloader with Bootice
First of all, download the Bootice utility from its official website. For computers based on a regular BIOS, the 32-bit or 64-bit edition of the utility does not matter. After unpacking Bootice, run it. On the first tab, select the required one from the drop-down list HDD if more than one is connected. And click the "Process MBR" button.
In the window that appears for Windows 7, 8.1 and 10, select the option "Windows NT 6.x MBR". In the case of Windows XP, you need to select the option above - "Windows NT 5.x MBR". Next, click the "Install / Config" button.
We confirm.
The Windows bootloader has been restored.
1.2. Deleting Linux Partitions in Windows Disk Management
After restoring the Windows bootloader, we go to the standard disk management utility. Press the Win + R keys and enter its name:
In the utility window, we delete two Linux partitions - specially prepared before installing it manually or automatically created by this system. In the latter case, as a rule, the Linux partitions on the hard drive are located immediately after the system partition. Windows partition. Not understanding the Linux file system, the Windows operating system does not give letters to its partitions, and, accordingly, they cannot be displayed in Explorer. But in any case, it is better to focus on these signs and on the sizes of Linux partitions. To delete Linux partitions on each of them, you need to call the context menu and select "Delete Volume".
The freed up disk space can then be arranged here, in the disk management utility, into a partition or several partitions acceptable for Windows (in the NTFS file system format). Learn more about creating simple partitions with regular tools Windows can be read in this site article.
2. AOMEI Partition Assistant
Alternative way get rid of Linux and bring back the Windows bootloader for users of computers based on a regular BIOS can offer functional program to work with AOMEI Partition Assistant disk space. All the necessary tools for these purposes are available in the free edition of the program Standard Edition. In the AOMEI Partition Assistant window on the side toolbar, in the "Disk Operations" block, select "MBR Recovery".
In the window that appears, from the drop-down list, select the type of loader for the corresponding Windows versions.
The program will warn you that after the planned operation, Linux will stop loading. Click "Yes".
ubuntu
Often we are faced with the fact that we need to install an additional system, because for one reason or another we do not have enough, or you are studying (student) and we urgently need to install Ubuntu on top of Windows 7. I will not go into the details of installing Ubuntu, you installed an additional linux system seems to be fine, but after a while you (we) no longer need a second system, namely Ubuntu.
What do we do next?
We go into Windows 7 set installation disk with the operating system with our seven, reboot and boot from disk, we will be prompted to install new system Windows 7, but we are in no hurry and select the item below - " System Restore(Repair Computer)«.
- Bootrec.exe /FixMbr - overwrite the master boot record in the system partition;
- Bootrec.exe /FixBoot - write a new boot sector to the system partition
Now, after rebooting, you should not be disturbed by the Grub bootloader of the Ubuntu operating system, after the above operations, you should normally boot the Windows operating system immediately.
But even in such cases, it is not very rare that garbage remains in the system boot menu, you turn on the computer, and your old Ubuntu or Windows XP is displayed in the list, which has long been gone.
- We go to the start menu in the execute, enter the command msconfig than we call the builtin windows application For advanced settings system, go to the item - "Downloads" where we select the priority system for us and click next to the item - " Use by default«.
- Next, let's go to Control Panel - All Control Panel Items - System - Advanced System Settings - Advanced - Boot and Recovery at the very top you will see an item - ““, two sub-items below that should not be ticked.
- Option number two, the Windows 7 operating system has a built-in program bcdedit which allows you to remove unnecessary entries from the boot menu of systems. To see this program in action go to start menu in run type command cmd to call the command line and directly in the command line itself, enter the command bcdedit and press Enter.
- I'll show you with an example, I have two systems in my system Windows 7 different versions and additionally Ubuntu , we need to remove the Ubuntu system from the boot menu, see the image below for more details:
After these operations, we are guaranteed to remove the extra system from the boot windows menu 7 but with a team bcdedit you need to work knowing what, alas, you are deleting, if you are not sure of your actions, it is better to call a user who is more experienced than you or a knowledgeable friend for help.
Well, the last thing I forgot to tell you, I think you noticed the long identifier in the last command in the image above. You may have a question, but how to select any text on the command line and subsequently copy it?
The answer is very simple, in the same command line we press the right mouse button, a menu appears, we select the mark item, after which you will see a blinking cursor with light white background arrows down, up, left and right we go where we want. To select the text we need, hold down the key Shift and right arrow, having selected the section of text we need, just press the right mouse button and all our text is copied to the clipboard. After again, press the right mouse button in the command line and select the item paste so I copied the one I needed identifier to remove the extra system from the system boot menu.
A variety of Linux distributions are increasingly being pre-installed on new computers and laptops. This is not amazing, Linux tea is free software, that is, it is completely free, which means that the price of such a laptop will be invisibly lower than its counterpart with a preinstalled Windows system.
Ubuntu offers the user in aggregate the same functionality as Windows, allowing you to browse Internet sites with browser support, receive mail, work with office and graphic applications, which are in no way inferior in their probabilities to their Windows counterparts. However, in the distance, not everyone is ready to migrate to Linux, retraining to work with an unusual operating system and new applications. Experiments on the transition to Linux also do not invariably suit the users who started them with their results. In addition, occasionally you need to remove Ubuntu just to try installing some other Linux distribution, say Gentoo. This means that the question often arises of how to remove Ubuntu from a computer or laptop.
In order to remove Ubuntu, you need:
If Windows is not on the computer, then primitively install this operating system using the standard method. In order to permanently remove Ubuntu, later Windows boot format the appropriate disk partition to NTFS. This will free up the space previously occupied by Ubuntu for Windows files and folders.
Users who migrated from the Windows operating system to linux ubuntu, probably immediately notice the difference in the installation process and the removal of programs. It is because of this that many users return to the more familiar Windows. But in fact, there is nothing difficult in this procedure.
You will need
- - A computer running Linux Ubuntu.
Instruction
1. One of the most primitive methods to get rid of a program is to remove it with "terminal" support. To do this, open the Application menu. To do this, click on it with the left mouse button. A list of subitems will appear. In this list, select "Typical", after that - "Terminal".
2. Next, at the "terminal" command line, type sudo apt-get remove. After the remove word, you need to enter the name of the program you want to remove. Let's say you need to uninstall the Midori Internet Browser. Accordingly, in the command line of the terminal, enter the command Sudo apt-get remove Midori. Later, you must enter the user's password. The process of uninstalling the program will begin.
3. Another way to remove program is to use the Synaptic tool. Select System. Then go to "Administration" and select "Synaptic Package Administrator". After that, the main menu of the application will open. In it, select "All". All list will appear. installed programs. If necessary, you can also prefer a list installed apps depending on the category Text editors”, “Games”, etc.).
4. Discover program which you will be deleting. After that, right-click on it and select "Cancel to delete" in the context menu. Another dialog box will appear. In this window, click on the "Apply" button. This program is now marked for removal. Further in the main Synaptic menu, also click "Apply". The application will be removed.
5. If necessary, you can configure the settings for uninstalling programs. To do this, in the Synaptic menu, select "Settings", then - "Options" and "Files". A window will open in which you will have the opportunity, say, to configure the storage settings for the distribution of the program or clear the cache after deleting it.
The Ubuntu operating system attracts many users with its original solutions and ease of installation. In an age of pervasiveness Windows is free Ubuntu not only maintains its market share, but also increases it in the segment of huge industrial systems.
Preparing a flash drive for installing Ubuntu
For creating bootable flash drive with Ubuntu, use the WinSetupFromUSB program. It is possible to download the WinSetupFromUSB 1.0 installation file from countless Internet sources for free. Install the program on your computer and run it. Make sure you choose the right one USB drive. Highlight the Auto format it with FBinst command. Next, select the item Linux ISO / Other Grub4dos compatible ISO and specify the path to the image Ubuntu disk. After this, the computer will display a dialog box asking for a name in the boot menu - specify an arbitrary name. Click the Go button to create an Ubuntu installation flash drive. Keep in mind that during the download, all files that, for example, were stored on the USB flash drive before, will be erased.
Computer settings
To authorize the installation from a USB flash drive, you need to make metamorphoses in the computer settings. To do this, boot the BIOS and set the flash drive as the first hard drive and first boot device in priorities boot devices. Don't forget to save the metamorphoses when you exit the BIOS and restart your computer.
Installing Ubuntu
Immediately after booting from a USB flash drive, the computer will display a dialog box for choosing the language and options for using it: install Ubuntu or run it without installation. Confirm the choice "Install Ubuntu", it is allowed to prefer Russian as the system language. At a later stage, the installation wizard will ask you to check the presence free space and ask you to certify the installation of third-party software. This software belongs to codecs, and it is better to download it. Follow the instructions on the screen until the installation wizard notifies you that it has detected a different operating system (Windows). There are several options: Windows is allowed to remove or install Ubuntu as a 2nd operating system. The 3rd option concerns experienced users and is an independent hard disk layout. An especially comfortable option is installing ubuntu as the 2nd system. Select this option and follow the installation wizard instructions. It should be borne in mind that after clicking the "Install Now" button, metamorphoses will be made to existing disk partitions and new ones will be made. This process will take some time. In the next steps, you will need to choose the requested time zone, keyboard layout and create an account. After entering all the data, the installation of Ubuntu on the computer starts. When the installation is complete, you will be prompted to restart your computer.
In operating systems Ubuntu and its derivatives, after installation, the guest login feature is enabled by default. This feature allows any user to enter your PC without a password. Even if the guest session is limited and the stranger will not be able to access your data, this feature will not be to everyone's liking. Fortunately, it can be easily turned off.
You will need
- -5 minutes time.
- - Command line skills.
Instruction
1. We start the terminal emulator.
2. Let's open for editing with superuser rights the configuration file of the display administrator lightdm. To do this, in the terminal window, execute the command: sudo nano /etc/lightdm/lightdm.conf.d/10-xubuntu.conf - for xubuntu or sudo nano /etc/lightdm/lightdm.conf.d/10-ubuntu.conf, if you using ubuntu. Enter your password when prompted.
3. Add the line allow-guest=false to the end of the file, as shown in the screenshot. Exit with saving: press Ctrl + X, after that Y as a result of the save request. We restart the computer.
Note!
The user on behalf of which editing is performed must have manager (root) rights on the computer. By default, the 1st user made during the installation of Ubuntu\Xubuntu is that user.
Helpful advice
To write commands faster in the terminal, use the TAB key to autocomplete commands. Say, by typing: sudo nano /etc/lightdm/lightdm.conf.d/ and pressing TAB, you will have the terminal end the line by appending the exception file in the folder to the end of the command, thus getting sudo nano /etc/lightdm/lightdm .conf.d/10-xubuntu.conf. If there are several files in the folder, then the terminal will display their names for you and you will be able to manually complete the command without errors in this way.
A person who has recently switched to using Linux often does not know how to perform even the simplest operations at first. One of these operations is formatting flash drives and memory cards. To do this, you will have to use the command line.
Instruction
1. Before connecting to a computer, put the USB flash drive into write permission mode. Such a transfer is carried out by a tiny switch located on its body. If there is no such switch, the drive is invariably in this mode. The same switches are occasionally available on SD cards, as well as on adapters for installing Mini SD and Micro SD cards in card readers.
2. After connecting a flash drive or installing a card in a card reader, do not rush to immediately start formatting. Be sure to transfer all the data from it to the rough disk of the computer. If file system corrupted, and formatting is done precisely for this reason, it would be true if you pull out those files that lend themselves to this.
3. If significant data is stored, and it was not possible to extract it in full, contact a data correction expert before formatting. It is possible that he will be able to extract a certain number of files from the media.
4. When you have finished extracting data, unmount the flash drive or card with the umount command. Without this, you will not be able to start formatting. But do not disconnect the media with the elect command - after that it will stop responding to calls until further reconnection.
5. Usually, a flash drive or card is mechanically assigned the designation /dev/sda when connected, and the exclusive partition on it is /dev/sda1. Occasionally, the media has several sections. Check if this is the case using the fdisk:fdisk /dev/sda utility. It allows you to view the partition table, delete them and add new ones. The order of its application is slightly different from the order of application of the utility with the same name in DOS and Windows, and therefore does not require explanation.
6. Perform full formatting with the command: mkfs.vfat -c -F 32 /dev/sda1 If necessary, replace /dev/sda1 with another partition name. Please note that full formatting- a long process, regardless of which OS it is carried out in, but it allows you to check the physical integrity of the media. If you are sure of its physical integrity, carry out a quick format that takes no more than 2 minutes. To do this, execute the same command, omitting the “-c” switch.
7. Mount the partition again in the usual way. It should not contain any files. Now check if the media is positively formatted. Copy a few small files to the partition, unmount and disconnect the flash drive or card, reconnect it and mount it. If the files remain in place, the operation was successful.
Related videos
Ubuntu is a modern multi-user operating system based on the Linux kernel. It is easy to install and upgrade software, high security tier, and flexible user account management.
You will need
- Computer with Ubuntu operating system, root permissions or sudo.
Instruction
1. Ubuntu has a very handy uninstall utility user from the command line - deluser. It is an interface to the userdel utility, intentionally tailored for operations on the command line. Super rights are required to run deluser user, which you can get by logging in as root or using the sudo command. To remove user Ubuntu, run the command in the terminal: sudo deluser user_name Where user_name is the name of the one to be deleted user. After the execution of the command, the deletion will occur account ordinary user, and it's bigger than that it won't be able to log in. This will preserve its home directory and all files that belong to it.
2. To remove user Ubuntu along with its home directory and mailbox, add the --remove-home option later to the deluser command. If you want to delete not only the home directory, but also all files user on the system, use the --remove-all-files switch instead of the --remove-home option. With this key, the deluser utility will detect all files and directories owned by the user being deleted and delete them, including the home directory.
3. If you want to delete user together with its home directory or all files, but if you want to save them just in case, use the --backup option. With this key, before deleting files user, they will be copied into a compressed tar archive, the one that will be made when the account in the current directory is deleted. To specify a different location for the archive with files user, specify the required directory after the --backup-to key.
4. If you want to delete user root, add the --force switch to the command. Given key confirms that removing root user is not an oversight. Without --force delete user root is not possible.
5. User in Ubuntu can be deleted and through GUI. To do this, open the "Administration" menu in the "System" section of the start menu and select the "Users and groups" item. The account management program window will open on the screen. Select user, which you want to delete in the left list and click on the "Delete" button. In the process of being removed user you can also choose to keep the files user or delete together with the account.
Helpful advice
You can change the default options for the deluser utility in the /etc/deluser.conf file
It is often necessary for educational or production purposes to have another OS in one computer and run, and over time, you need to remove a linux-like system.
However, if you use the boot Windows disk 7 and boot the computer from it, then a recommendation will appear to reinstall Windows 7. In this case, you need to click on the line below "System Restore".
After that, a menu will appear in which you need to click on "Next". In the "" menu that opens, click on "Command Prompt".
A black console window will open: 
How to remove Ubuntu from Windows 7 boot menu?
On the line you need to write the following:
- Bootrec.exe /FixMbr - a command that makes the master boot record in the system directory;
- Bootrec.exe /FixBoot is a command that adds a new boot sector to the system directory.
After completing these steps, the computer will immediately boot Windows 7, and Ubuntu will no longer bother. However, debris may remain in the computer.
How to remove residual "artifacts" of Ubuntu or any other OS?
There are the following solutions to the problem, with the removal of garbage left over from an unnecessary system, be it Ubuntu or an old Windows:
- Through "Start" you must enter "msconfig". As a result, a standard Windows 7 utility will appear, which is used to configure the OS. Here you need to enter the "Downloads" and activate the line "Use by default" for the system to be left.
Then in the "Control Panel" you need to sequentially go through the chain: "All Control Panel Items" - "System" - "Advanced system settings" - "Advanced" - "Start and restore", where at the top there will be an inscription "Loading the operating system" , under this inscription from 2 points it is required to remove the "jackdaws".
These actions allow you to remove Ubuntu from the OS boot menu.
However, if the user does not have sufficient experience with "bcdedit", then it is recommended to contact a more experienced user.
For convenience and speed up the process, it is recommended to select and copy identifiers from a large number of characters (in the example above, c7e6848 ... is the identifier of Ubuntu, which is being deleted), so as not to type them manually. To do this, you need to right-click on the command line.
This will display the context menu, where you need to click on "mark". Next, a flickering cursor will appear on a light background, with arrows "right", "left", "up", "down". With it, you can perform the necessary transition. To select text, hold down the "Shift" button and the "right" arrow. Then, by calling the context window with the mouse, copy and paste the text where necessary with a similar action.
Loading...