Despite the fact that some users consider the transition to Windows 10 a hasty decision, the popularity of this OS is growing every day. Many talk about the "dampness" of the system, the lack of drivers and other problems, but its installation is only a matter of time. In this article, you will learn how to install Windows 10 from a USB flash drive.
In what cases is it convenient to install from a USB flash drive
To install the OS from a USB drive, you do not need a CD-ROM and disk. Therefore, this method can help out if the drive on the PC fails or is absent on laptops. All that is needed for installation is a bootable USB flash drive and the device itself.
System requirements
Before starting the process, make sure your computer meets the minimum requirements. Windows 10 requires the following specifications:
- Processor - above 1 GHz.
- RAM - 32-bit systems require 1 GB, 64-2 GB.
- Hard disk space - 16 GB for 32-bit systems, 20 GB for 64.
- Video card that supports DirectX 9.
- Display - 800x600 and above.
The popularity of Windows 10 is growing every day
Installation process
Preparation
First of all, take care of personal data. When formatting, all files from drive C, including from the desktop, will be permanently deleted. Therefore, move them to another section, on HDD or external drive in advance.
How to start the installation process from a flash drive
You can start the installation process in the following ways:
- through the Boot menu;
- through the BIOS.
Please note that before entering the boot menu or BIOS, the USB flash drive must already be inserted into the computer.
Boot-menu is a BIOS option that allows you to select the drive from which the computer will boot. Unlike changing the priority in the BIOS, the boot menu selects the drive used once.
In order to enter the boot-menu, you need to press a special button while the computer is booting. Depending on the laptop manufacturer or motherboard on a computer, the boot menu is launched using F8 (Asus, whose model names begin with k, x), F11 (MSI, AsRock), F12 (Acer, Lenovo, Dell, Toshiba, Gigabyte) and Esc (Samsung, Intel, new Asus models ).
This is what the boot menu looks like
You will be taken to the boot menu where you need to select the USB drive. If you have new laptop(with Windows 8 and above), where the boot-menu does not start in the ways listed, then press "Shutdown" while holding the Shift key.
Installing Windows through the Boot Menu (video)
BIOS
The second way to start the OS installation from a USB drive is to change the boot priority in the BIOS. To enter it, you need to press Del or F12 immediately after starting the device.
The appearance of the BIOS menu is different, consider the most common options.
- UEFI BIOS. Most modern maternal BIOS boards(more precisely, UEFI) - graphical, which makes it possible to change the boot order with the mouse. If this is not possible, then change the priority in the BIOSFeatures - BootOptions section.
This is what the BIOS looks like on Gygabyte motherboards
AMI motherboard BIOS
By pressing the "Right" button, select "Boot". Then go to the "Hard Disk Drives" section and select "1st Drive".
Go to the "Hard Disk Drives" section
Here you should select the USB storage.
Change the download priority
Then go to the "Boot device priority" section, select "First boot device" and click on the USB drive again.
- BIOS AWARD or Phoenix.
Motherboard BIOS Award
If your BIOS looks like this screenshot, then go to "Advanced BIOS Features" - "First Boot Device".
Load order in Award
Select a priority device to boot, in our case it should contain the word "USB".
BIOS setup for Windows installation (video)
Operating system installation
After you use the BIOS or boot-menu, you will see "Press any key to boot from CD or DVD", press any button and wait.
The following window will appear where you need to select the language, time format and keyboard layout. Select the one you want and click "Next".
Select language, time format, keyboard layout
You will be taken to the next window, click "Install".
- if you purchased Windows 10, then enter the key;
- if you received the OS as free update or you do not have a key, then click "Skip".
Windows 7, 8 license keys are not suitable for activating Windows 10.
Enter your product key or click on ‘Skip’
Then you will see the license agreement window. Read it, check the box "I accept the terms of the license" and click "Next".
You will be taken to the installation type selection menu.
Select installation type
There are two types of installation available to you - upgrade and custom installation. When updating, all settings and programs will remain, and old system will be saved to the "Windows.Old" folder. Custom installation will remove all old files, allow you to partition disks and format them. This method cleans the PC of garbage, and we will consider it.
After selecting the installation type, you will be taken to the next menu (see photo).
Select partition to install
By clicking "Disk Setup", you will see additional buttons (delete, format, etc.). The following options are available to you:
- Formatting the partition corresponding to the C drive for clean install OS.
- Installation without formatting. In this case, the old system will be saved to the Windows.Old folder.
- Installing a new OS on a different partition. Two systems will be installed on your computer, the choice will be made each time the PC boots.
In this menu, you can change the structure of the hard disk.
Please note that this may result in data loss.
Choose your option and click Next. The system files will be copied to the PC, after which the computer will reboot. If you see "Press any key to boot from CD or DVD", then you do not need to press anything. The OS should start from a computer, not a flash drive. Once launched, the installation of Windows 10 will begin.
After that, you will again be taken to the key entry window. Enter it or click "Do it later".
At the end of the installation, it is possible to configure the system settings. After entering (or skipping) the product key, you will be taken to a special settings window.
Go to the settings menu or select standard parameters
You can select Customize Options (where you can turn off unwanted settings) or Use Default Options. Next, the account creation menu will appear. Use account Microsoft or create a local one for this PC.
The last step is installation standard applications and preparation for launch. This is a very lengthy process, it can take more than half an hour.
Windows 10 is installed and ready for the first launch
Upon completion of preparation for launch, you will see the desktop of the operating system. On this Windows installation 10 can be considered complete.
What not to do
During installation, do not force shutdown and restart your computer or laptop. It may seem to you that the computer is frozen, but it is not - the system is being installed. The download speed depends on the power of the computer.
Now you know how to install Windows 10 from a flash drive. This method is not so complicated, it does not require additional knowledge and equipment. All you need is a computer and a USB drive.
Installation on a computer or laptop that has a DVD drive does not raise any questions. With netbooks, things are more complicated. Let's look at the options for installing Windows 10 from a USB flash drive to such devices. Here we must understand that there are simply no other ways.
The easiest way to install Windows 10 from a USB flash drive over an existing system
Actually, you don't have to go far to install a new OS. It installs without any problems or additional steps, as it was with Windows 7 and 8, from a regular USB drive.
In the simplest version, a program for installing Windows 10 from a USB flash drive called Media Creation Tool is used. In this case, the new operating system is installed on top of the old one (updating to a more recent version). It is enough just to launch the program to start the process of downloading the distribution kit with subsequent installation, where the Upgrade item is selected in the installation parameters, which allows you to save absolutely all previously set system settings.
How to install Windows 10 from a flash drive with the removal of the old system
Another thing is when the old OS needs to be removed completely. If anyone does not know, this is achieved by formatting the partition into which the installation will be performed. Only here you need to keep in mind that initially in the "top ten" it is supposed to be possible to roll back (return to the old OS to the state that preceded the installation of Windows 10).
As is already clear, after formatting the hard drive or partition hard drive such a possibility would be completely ruled out. So first think about which option is preferable.
Creating an image
Now consider the method of installing Windows 10 from a USB flash drive with the condition complete removal existing OS. Needless to say, you need to download the installation distribution or disk image. If the distribution is not downloaded as an image, it will have to be created.
To do this, you can use any utilities that can work with disk images. Then it needs to be written to a USB drive. For example, in program UltraISO first, the desired file is opened, after which the boot menu is used, where the command for recording the hard disk image is selected (in this case, our flash drive is selected in the window that appears). A warning will appear stating that all data from the media will be deleted. We agree and start the recording process.
Please note: if the USB-HDD recording mode is not enabled by default, it is highly recommended to enable it.
BIOS settings
The problem of how to install Windows 10 from a USB flash drive is not limited to one. To computer system reacted to such a boot device, it must be set first in the boot priority in the BIOS settings.
The BIOS is accessed using the Del, F2, F12 keys, etc. (it all depends on the brand of the device model and the manufacturer of the BIOS). Here you need to find settings like Boot Device Priority and specify a flash drive as the main boot device. Such actions can be performed only if the flash drive was inserted into the appropriate port even before turning on the computer, laptop or netbook. Otherwise, the device will not be detected, and it simply will not be in the list of available devices.
Installation process and initial setup
So, it happened, and the installation process began. The first step is to specify the language to use, the time and currency format, and the keyboard layout or input method. Next, we agree with the license, after which in the new window we select the item not Upgrade, but Custom and activate the installation process.
It remains to wait 10-15 minutes (again, depending on the device model), and at the end of the installation, reboot the system (if it is not done automatically), go back to the BIOS settings and install the hard drive in the boot priority as the first device.
Now let's look at the initial loading of the operating system. Here you need to select the Settings item, and then go to either quick settings(Express Settings) if you do not need to change the default settings, or use their change (Customize) if you need to customize the basic configuration for yourself. As practice shows, it is better not to change anything.
However, you can play with the settings and rearrange them in terms of driver updates, privacy on the Internet, the provision or prohibition of the tracking system of the current location or personal data in some other applications, immediately create an account Microsoft records and a backup method for restoring it, for example, through email or mobile phone, check the created account, provide the ability to save photos or other documents in the Microsoft One Drive cloud storage, etc. However, all this is done solely at the request of the user himself.
Upon completion of all settings, the installation can be considered complete. The system is ready for use.
Conclusion
Finally, it remains to add that the process of installing Windows 10 from a USB flash drive is not so complicated. It looks much simpler than the installation of the same "seven". Sometimes, however, an error may occur when installing Windows 10 from a USB flash drive. It is most often associated with wrong settings BIOS, damage to the USB drive itself, lack of free space on the hard drive or incorrect entries in the system registry. As practice shows, an error can appear mainly when updating an existing OS to version 10. In most cases, when installing, so to speak, from scratch, this happens extremely rarely.
Reinstalling the OS is perhaps the most common need among PC users. Therefore, today we will talk about how to install windows 10 from flash drive, starting from recording an image and ending with setting up an already installed system.
Burning a bootable flash drive
Unlike many others Windows utilities 10 you can't just take it and copy it to a USB flash drive like a regular file. In this case, it simply will not start. To install Windows 10 via a flash drive, you must use special program to burn an ISO image to a flash drive.
There are a lot of them, but not all of them have a friendly and clear interface. Consider the simplest and “lightest” utility in terms of memory - Rufus. You can download it from any site, after which you do the following:
- Insert a USB flash drive.
- Open the downloaded program.
- In the window that opens, select your flash drive (as a rule, it is detected automatically).
- Change the file system to NTFS.
- Check the box " Quick Format"(If it is already there, skip this item).
- Check the box "Create boot disk”, then specify the path to the downloaded Windows image 10.
- Press "Start".
Attention! While creating bootable flash drive all data on it will be deleted, so you should take care of their safety in advance.
Preparing to install Windows 10 via a USB flash drive
To start installing Windows 10 from a USB flash drive, you need to change bios settings. The fact is that the flash drive does not boot first by default, that is, the first in line is usually the hard drive, respectively, the download will start from it, and then either you just go into the old OS, or (if it is not there) you will admire the black screen .
So, you can force BIOS to pay attention to the flash drive in this way:
- When turning on the computer, quickly press Del or F2 (see the hint on the start screen).
- You must get into the BIOS settings. The menu will differ depending on the BIOS version. If you have a strip with a horizontal menu, then look for the “Boot” tab, and in it “Hard Disk Drives”, click on it and select your flash drive from the drop-down list. If you have two columns of a vertical menu, then we are looking for "Advanced BIOS Features" and again put our flash drive in "First boot devices".
- Press F10 and reboot the device.
If you did everything correctly, then the next time you start, a dialog box with the OS will open.
Windows 10 from a flash drive does not have to be installed via BIOS. In newer versions of PCs and laptops, there is a special menu in which you can immediately specify the device boot order. It is opened by pressing the F8 - F12 or ESC key, each device model has its own. So here either act at random, or read the documentation for your laptop. But, as mentioned above, this method is useful only for owners of modern devices, there is simply no such menu on older PCs.
OS installation instructions
Installing Windows 10 from a flash drive this stage the lightest. Everything is Russified and step by step, so we will not consider each installation item, we will focus only on choosing a place to install the system. You will be offered two options: update and custom installation. We choose the second item. Further:
- Select the desired disk.
- We format it, you can, of course, do without it, but why do you need extra garbage along with the container system?
- Click "Next".
Then it remains to wait a bit, and as soon as the PC starts to reboot, re-enter the BIOS and follow the steps above to boot from the hard drive on which the OS is installed.
Before you enter new Windows 10, you will need to adjust some settings:
- We recommend skipping the network setup.
- In the "Who owns this computer" window, check "This computer belongs to me."
- Next, you need to enter a password for your Microsoft account or create a new one, but this is not at all necessary and can be done later, so it’s better to skip it as well.
- It remains to create an account.
All, congratulations, the installation of Windows 10 on a laptop from a USB flash drive is completed!
First, we recommend that you do not disable automatic update system and always perform it on time, it depends on how your PC will be protected from external threats. Secondly, it is advisable to check the drivers and, if necessary, update them. For this:
- click on the "Start" menu;
- select "Device Manager";
- select a category of drivers, for example, Video adapter;
- click right click mouse per device;
- select the item "Update driver";
- in the window that opens, click on automatic search.
We recommend updating drivers for all devices. The standard ones, although they can fit, are a poor substitute for native ones. Otherwise, there is nothing to change. Video and audio can be viewed standard means OS, but for additional features download programs from the Internet, but only with official sources, to avoid viruses.
We hope that the instruction on how to install Windows 10 via a USB flash drive was useful!
If you still have questions on the topic “How to install Windows 10 from a USB flash drive? Step-by-step instruction”, then you can set them in the comment
if(function_exists("the_ratings")) ( the_ratings(); ) ?>
If XP and the seven already bear the title of legendary operating systems from Microsoft, then Windows 10 appeared relatively recently. Many users want to get such a novelty, but then the eternal question arises about installing Windows 10 from a USB flash drive? The use of a USB drive for this purpose has always been plagued by many difficulties, it is different from installing an OS from a CD. Fortunately, the problem can be solved, but for this you will have to prepare a little.
At the very beginning of the process, you need to create a boot drive with the programs and files necessary to install the OS. In the case when Windows is licensed, then to create boot drive you can use the official application from the company, which can be found on the Microsoft website.
Do not forget about the bitness of the operating system, so you need to download the OS taking into account this indicator in the current version (32 or 64-bit). After downloading and running the utility, you need to click on "Create installation media for another PC", then you need to select the OS version and the language in which it will work.
An important point. If you have a license for the Home version, you will not be able to install the Pro version, the OS simply cannot be activated. As for the bit depth, everything here is at the discretion of the user, even if you have x86, you can download x64.
The next step in creating a bootable drive is to select "USB flash drive" from the create menu. Then you just need to wait until all the files for installation "move" to the USB flash drive.
Using the utility from the official site, you can also get ISO image operating system, which can later be written to a disk or flash drive. By default, the program prompts the user to download exactly the version that will work best on the computer (taking into account specifications and version of the current OS).
Preparation process
Before you update Windows on your computer, you need to think about the safety of your personal data (especially those that are lying around on your desktop). It is best to move them to a separate flash drive or CD. You can also save them to separate section on a hard drive that will not be formatted during the process.
Next, you need to put the boot from the drive. First you need to restart the computer (just turn off and then turn on the equipment is not worth it, in this mode, the fast boot features will interfere with the installation process, so you should use the reboot).
- Through BIOS.
- Through boot menu.
BIOS settings
To enter this menu, press a certain key during boot. IN personal computers most often, BIOS is called by the Del button, and in laptops, when you press F2. The whole procedure is done in several stages:
boot menu
Using this method is considered more convenient. This is such a special menu, which is also called using certain keys. Most often it is F11, F12 or Esc. Further, a flash drive is also selected as a priority. 
When the distribution kit of the new operating system is loaded, the message “Press any key to boot from CD or DVD” will appear on the screen with a black background. Then you need to press any key and wait until the installation starts.
Installing Windows 10
In the first installation window, the user can select the language, the keyboard input method, and even the time zone format. In principle, all settings can be left by default by selecting only Russian (or whatever you need) language. 
Next, the installer will require you to enter a key. If the original Windows 10 disc was purchased, then the secret combination of letters and numbers can be found on the box or in the confirmation letter. There were also some changes in the policy of Microsoft since October 2015, you can enter license key for Windows 7 or 8.1. When there is no key, we simply skip the menu for entering it, the system will install without problems, but will not be activated. However, activation can be done after installation.
In the next window, a license agreement will appear, which ideally needs to be read, check the box to agree to its terms and click "Next". 
Installation options
An important step is the choice of installation option, there are two of them at once: 
- Update. It is recommended to install in this way when you need to save all the files and parameters of the old OS, and it will be stored in Windows folder old. This is a normal operating system update.
- Custom installation. This option provides only partial data storage. Also in the process, it will be possible to split the hard disk into special partitions and format them, that is, completely clear them.
Completing the installation
If you select the second option, a window will open in which you need to select a location for the new OS. When the choice is made, the traditional "Next" button is pressed. After that, the installation of OS files on the computer begins, upon completion of the process, a reboot will occur. This time, the computer will again ask you to press a key, but you should not do this. In this case, you only need to wait until the operating system boots not from a USB flash drive, but from a hard disk.
Then again you have to wait, without pressing anything, the system will automatically configure certain components. At this time, there may be a computer freeze, frequent reboots, etc. No action should be taken, this is a normal process.
At the next stage, the program will again ask you to enter the key, in this situation we do the same as in the previous one. Then there will be a setting of certain parameters, here you can stop at default settings systems. 
Then you need to log into your account or create it locally (suitable in cases where there is no Internet). The final step is to install standard programs and their settings. operating system will accompany the process with a notification that it will not take much time, but everything depends on the hardware. In some cases, the last stage can last up to half an hour.
In contact with
It is not necessary to install windows 10 on a computer or laptop hp, asus, acer, sony, lenovo, samsung, toshiba from a USB flash drive or disk through the BIOS.
It is possible through an update. In the second option, you do not need to enter the BIOS, it is simpler and does not differ in efficiency.
Now one more thing. You may not even need to enter the BIOS. Just insert the disk or flash drive from which you intend to install windows 10 and press Esc / F8 / F10 / F11 or F12 when you turn it on.
You can also see an inscription in the form of the names of the keys and their combinations at the bottom when starting a computer or laptop.
Remember only the keys, restart the PC and immediately when you turn it on, constantly press them until you see windows with a boot selection.
If a disc is installed, you should see DVD drive, if a flash drive, then the name of the flash drive.
One more before installing windows 10 through the BIOS, be sure to turn on the computer or laptop and see how many GB are on the C drive if you have several partitions.
This is necessary because you will not see the names of the partition, it is “C” or “D”, but only how many GB they have.
If the above results did not work, then below you will learn how to do it all on different types bios.
How to install windows 10 from a disk or flash drive through AMI bios
To start installing Windows 10 in the AMI BIOS, after logging in, go to the “Boot” tab. The mouse will not work, only the arrow keys (bottom right).
After the transition, click on the line: "Boot Device Priority" and click on "Enter".
Then you will see that the first line "1st Boot Device" is highlighted in white - press Enter. You can navigate there using the up/down arrow keys.
If you need to install from a disk, then select CD-ROM, if from a USB flash drive, then if it is inserted, it should be displayed.
It's not in the picture right now because I don't have it installed. You should have a line USB-HDD" or "Removable Devices.
When you decide what to install from, then select the disk or flash drive with the up / down arrow keys and press Enter.
Now save the changes with the F10 key and accept the message by clicking on the Enter button. If something goes wrong, you can always take a step back with the Esc key.
How to install windows 10 from a disk or flash drive through the bios Award Phoenix
In the Award Phoenix bios, control is also done with the arrow buttons. To configure to install Windows 10, click on the line: "Advanced bios Feature" and click on: "First Boot Devices".
Here, depending on the installation method, select CD-ROM if from a disk or USB if via a flash drive.
How to install windows 10 from disk or flash drive via UEFI bios
The UEFI bios is more advanced, it even has a Russian language (maybe not everyone has it, I have it.)
If you have it in Russian (you can change the language on the first tab), then after logging in, go to the "download" tab.
Then, in the boot priority section, click on the line "boot option #1" and assign boot device disk or flash drive. If you are installing from a disc, select the drive.
If from a flash drive - select Removable Devices / USB and move the selected device to the top of the list. To save, press F10 and confirm Enter.
NOTE: very often after changing settings bios windows 10 from a disk or flash drive is not installed.
Then immediately after logging in, try pressing either any key or the Esc button. Of course, undescribed problems may arise, then a question in the comments describing the problem will help. Good luck.
Category: Uncategorized
Loading...