Became mandatory, i.e. they are downloaded and installed automatically as soon as they become available. Although the new mechanism is convenient in terms of keeping up-to-date Windows devices 10, timely receipt of security patches, fixes and improvements, given function Not all users like it.
If you are using a computer with Windows control 10, then depending on the edition of the system, you have the opportunity to disable automatic updates using the local group policy editor or the system registry.
In this guide, we will show you how to block the installation of automatic updates in Windows 10.
How to disable automatic updates using local group policies
If you are using Windows 10 Pro, you can use the Group Policy Editor to prevent automatic download and installing updates.
- Enter gpedit.msc
- ” and double click on it.
- Select the "" option to disable this local policy.
- Click the "Apply" button.
- Click the OK button.
After completing these steps, Windows 10 will no longer download updates to automatic mode. In this way, you can also save traffic when using limited connections. To install future updates, you need to go to the application Settings > Update & Security > Windows Update.
If disabling the policy didn't work, you can use the Group Policy Editor to prevent automatic installation of updates on your computer.
- Press combination Windows keys+ R to open the Run command window.
- Enter gpedit.msc and click OK to open the Local Group Policy Editor.
- Go to the following path: Computer Configuration\Administrative Templates\Windows Components\Windows Update
- In the right part of the window, select the item "" and double-click on it.
- Select the option " Included' to enable this local policy.
- In the options section, you will find several options available:
Choose the option that best suits your needs. It is recommended to use option 2 - Download notification and automatic installation to disable automatic updates permanently.
- Click the "Apply" button.
- Click the OK button.
Settings > Update & Security > Windows Update.
You can roll back the changes at any time using the same sequence of steps, but in step 5 you need to select the "Not set" option. Then restart your device to apply the changes.
How to disable automatic updates using the registry
On Windows 10 Pro and Windows 10 Home, you can turn off automatic updates using the system registry.
Note: Changing the registry incorrectly can cause serious problems. It is recommended to create backup Windows Registry before performing these steps. From the Registry Editor menu, select File > Export to save a backup.
- Press the Windows key + R keyboard shortcut to open the Run command window.
- Enter regedit
- Go to the following path: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows
- New > Section.
- Name the new section windows update and press Enter.
- New > Section.
- Name the new section AU and press Enter.
- New > DWORD Value (32-bit).
- Name the new parameter and press Enter.
- Double click on the created parameter and change the value from 0 to 1.
- Click the OK button.
After completing these steps, Windows 10 will not receive automatic updates. To force the installation of future updates, you need to go to the application Settings > Update & Security > Windows Update.
Setting automatic update options
If disabling the service policy didn't work, you can use the Registry Editor to prevent updates from automatically installing on your computer.
- Press the Windows key + R keyboard shortcut to open the Run command window.
- Enter regedit and click OK to open the Registry Editor.
- Navigate to the following path: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows
- Click right click mouse over the Windows partition and select New > Section.
- Name the new section windows update and press Enter.
- Right-click on the created WindowsUpdate partition and select New > Section.
- Name the new section AU and press Enter.
- Right-click on the created AU partition and select New > DWORD Value (32-bit).
- Name the new parameter AUOptions and press Enter.
- Double click on the created parameter and set one of the following values:
- 2 - Notify before downloading and installing any updates.
- 3 - Automatically download updates and notify when they are ready for installation.
- 4 - Automatically download updates and install them according to the specified schedule.
- 5 - Allow local administrators to select notification and installation configuration mode for automatic update.
Similar to using the Group Policy Editor, you can choose the option that best suits your needs. It is recommended to use option 2 - Download notification and automatic installation to disable automatic updates permanently.
- Click the OK button.
After completing these steps, Windows 10 will stop downloading updates automatically. When new updates become available, you will be notified and must install them manually by going to the app Settings > Update & Security > Windows Update.
At any time, you can roll back changes using the same sequence of actions, but in step 4 you need to delete Windows partition Update using the right click menu. Then restart your device to apply the changes.
Conclusion
Although we have provided instructions for disabling automatic updates in Windows 10, it is important to emphasize that skipping updates is not recommended. The reason is that updates are critical to keeping Windows 10 running correctly and keeping your data safe.
However, there are scenarios where you may want to be able to manually apply updates or schedule an installation over a specific period of time. For example, you want to make sure that a specific cumulative update works correctly before installing it on a workstation.
The following instructions only block monthly cumulative updates, which usually fix security vulnerabilities and improve Windows performance 10.
If you would like to temporarily cancel automatic installation feature updates such as the Windows 10 October 2018 Update , you need to set the major update installation delay feature. And starting with Windows 10 May 2019 Update, the system will no longer automatically install feature updates twice a year.
You can also use third-party utilities to disable Windows 10 updates
In terms of updating the system in Windows 10, a lot has changed. If in Windows 8 (8.1), Windows 7 and even in XP we could disable automatic updates in a few steps, or start checking and downloading updates manually, then in Windows 10 this is not possible. The system itself checks Microsoft servers for updates, downloads them and installs them. Only on Windows 10 Pro, you can delay the installation of updates. In all other versions, the computer will automatically install updates, even without the consent of the user.
On the one hand, this Microsoft policy is understandable. Updates should make the system more stable and reliable. But many do not like that the system itself downloads and installs something all the time. I think you are familiar with the inscription "Update settings ... Do not turn off the computer", which can often be seen when turning off the computer. In addition, by downloading updates, Windows 10 creates a load on the Internet channel and uses traffic. And if you have a certain traffic limit (for example, when connecting via a 3G modem), then this is already a big problem. Yes, and after such updates, it is not uncommon for a variety of problems to appear. The Internet stops working, programs do not start, etc.
But no matter how hard Microsoft tries to tie us to love for updates, there are several ways in which you can turn off automatic updating of Windows 10. Now we will look at the most popular methods, and you can choose the one that suits you best and prevent the system from automatically downloading and installing updates .
Disable Windows 10 Updates by Disabling Windows Update
This is the most reliable and working way that is suitable for everyone. Windows versions 10. We will simply disable the Update Center (service windows update). It's not at all difficult to do this.
To get started, press the keyboard shortcut + R. The Run window will appear. Enter services.msc and click on the button Ok.
The Services window will open. We are looking for the service "Windows Update (Windows Update)" in the list, and double-click on it. In the new window, click on the "Stop" button. Select Startup Type "Disabled". Click "Apply" and "Ok".
After these steps, the system will not automatically download updates and install them. Until you run again Windows Service Update by setting the startup type to Automatic and restarting the computer.
Via Windows Update setting (not suitable for Home version)
Please note that this method will not completely disable automatic updates in Windows 10. We will only configure it. Disable automatic restart of the computer, and postpone the installation of updates. Also, this method is not suitable for owners home version operating system. How to find out the version of your system, I wrote in the article.
First of all, we need to open the Settings (Start - Settings). And open the "Update and Security" section.
Next, on the "Windows Update" tab, you need to click on the "Advanced Options" item. 
- First of all, in the drop-down menu, select the item "Notify when planning a restart." So that the computer itself does not restart to install updates.
- Next, turn off the option "Give me updates for other Microsoft products when I update Windows."
- Check the box next to Postpone updates.
I also advise you to disable the update from several places. To do this, click on "Choose how and when to receive updates", and disable updating your computer from several places.
We have dealt with this method. Now the update process will be less intrusive.
Disable Windows 10 Automatic Updates via the Local Group Policy Editor
A good and reliable way to disable updates. But this method is also not suitable for the home version. For Windows 10 Enterprise and Pro editions only. If you have one of these versions, then I advise you to use this method.
Pressing a keyboard shortcut + R, enter gpedit.msc And press Ok. The local editor will open. group policy.
Open the section "Computer Configuration" - "Administrative Templates" - "Windows Components" - "Windows Update". We find the item "Setting automatic updates" and open it by double-clicking the left mouse button.
Set the switch next to " Disabled", click on the "Apply" and "Ok" button.
All is ready.
Make Wi-Fi a metered connection and Windows 10 won't download updates
If you are connected to the Internet via WiFi networks, you can set this connection as metered. And through the limit Windows connection 10 will not download updates. We have already written about this method.
To do this, open Start - Settings, select "Network and Internet" - "Wi-Fi". Click on the "Advanced Options" link.
That's all, we prevented the system from downloading updates when connected via a Wi-Fi network.
Program to disable updates in Windows 10: Win Updates Disabler
There are many programs that can disable updates. One such program is called Win Updates Disabler. It is free, you can download it from the official website at the link http://www.site2unblock.com/win-updates-disabler/ . There are also portable version.
Download Win Updates Disabler, install and run it. On the tab " Disable" put a tick next to " Disable Windows Update", and press the button" Apply Now«.
A message should appear that the settings have been successfully applied, and a suggestion to restart the computer. To enable updates back in Win Updates Disabler, go to the Enable tab, set the required items and apply the settings.
The program is good. There is also an option to disable Windows Defender, firewall, and security center.
Back in the Windows XP operating system, developers introduced a special service that was responsible for periodic updates. They were automatically downloaded via the Internet from Microsoft servers to the user's computer, and the system determined whether to install them at the user's request or automatically. Consider why they are needed, and how to disable Windows 7 updates.
What are they needed for
According to the creators of the system, fresh updates have a positive effect on its operation. program code. They specifically work to improve and optimize the work computer processes in system. As a result, all efforts are designed to increase performance. The computer should become more responsive, and various flaws and errors should disappear. More often than not, updates also provide new features:
- improved diagnostic and troubleshooting tools;
- supported by modern peripheral equipment;
- new functions are added to the system;
- patches for the system are added Windows Security and other benefits.
For those who have a license Windows system, installing such updates, as a rule, does not threaten anything.
But, based on the bitter experience of many computer owners, these updates are only needed if they are able to bring real benefit. But who from ordinary users will be able to determine in advance the usefulness of the proposed Microsoft improvements. If some game or program is unstable in this operating system, then it will tell you which updates are needed. But when the computer works reliably, stably and does not give out unexpected glitches, then what's the point of updating if it already works smartly. As the admins joke: “it works - don’t bother”, but it’s better to completely disable Windows 7 updates. Often they can cause a lot of problems. Why take the risk, and if you're lucky.
Why would you need to disable
There are several reasons for the question of how to disable automatic updates in Windows 7:
- User pirated version operating system. And if you completely disable the update, the risk that Microsoft server will issue a "red card" and limit the functionality of the operating system for using unlicensed Windows 7, just reduced to zero.
- It is not uncommon for an updated system to unexpectedly issue critical error, which can only be fixed by a full recovery, and wondering how to disable Windows 7 auto-update is clearly too late.
- small size system disk, most often it is the "C" drive. And since the packages with fixes are very voluminous, then free place disappears instantly. Therefore, it becomes simply necessary to disable automatic updates on your computer.
- The need to wait for the computer to turn off after an update in Windows 7. Those who updated faced a situation where they needed to turn off the laptop, and a warning appeared on the monitor screen that this should not be done, because “updates are being installed on Windows 7 1 of 1235 "! And the user must choose either an updated system or a deep sleep. Here you will inevitably think about how to prohibit the system from updating.
- If the Internet is limited in incoming and outgoing traffic. For such users, the question is also relevant, how to disable automatic updating of Windows 7.
- If the Internet channel has a low speed, then it is better to disable this service in Windows 7 forever.
If at least one of the above reasons is relevant for your system, then it is better not to look for Windows 7 updates.
Well, now about how to disable updates. There are two ways. Let's consider each of them separately.
Disable completely
Before turning off Windows Update 7, it is necessary to find management service. Consider the sequence of actions:
- After pressing the button Start, a window will open in which you need to select "".
- It's the turn of the section "".
- In the list we find the line "".
- In the window that opens, almost at the bottom there is an item " Windows Update". It must also be activated by double-clicking on the left mouse button.
- In the window that appears, in the line " Launch type» select the item « Disabled” and click the Stop button.
It remains to click on the Apply button and confirm your actions with the OK button.
After this service is completely disabled, the system will not be updated. But if you want to receive Windows 7 updates, if you carry out all the steps again, you can restore full functionality by changing the settings.
Disable only automatic update
If you want to reserve the right to manually download and install updates yourself, you can limit yourself to disabling automatic search.
Let's see how to do it:
Now the system will search for updates, but will not automatically install without the user's permission. The owner of the computer can manually download updates from the Download Center at any time by clicking on the button Check for updates.
Disable system notifications
After the actions taken, the system will not search for updates and install them automatically. But that is not all. Since this is a negative event for Windows 7, it will still remind you of this with a flag with a red cross in the right corner of the monitor.
Let's turn off this reminder of the changes made:
Now the red cross is gone and operating system does not display reminders.
But nothing prevents you from updating manually if you wish. It is enough to start the search for Windows 7 updates again.
Conclusion
Finishing this short description of why you need to update the system, and how to disable the update service, we want to remind you that each user can install the update manually, as well as disable the update service completely or partially. We hope these short instructions will help you. They are quite simple, but will keep the computer working for a long time.
Related videos
By default, the option to automatically download service packs is enabled in Windows. These packages are designed to make corrections, additions to the OS in order to increase security, optimize computer performance, therefore, if possible, it is not recommended to disable them. However, there are circumstances when it is necessary to disable automatic updating of Windows 7, 8, 10 so that such situations do not arise:
- PC crashes after a completed or erroneous installation of updates that require the removal of packages or a system restore.
- Restriction of functionality and the appearance of a message about OS activation for users of pirated Windows.
- Decrease in the speed of Internet access during the download of packages by the system or unwanted waste of traffic with a limited tariff of the connected Internet.
- Reducing disk space, files you do not need.
- Long waits for updates to be installed at the wrong time.
There are many ways to disable OS updates completely, or with restrictions. Everything depends on your needs.
Disable via update center
This instruction is only suitable for Windows 7, 8, it will not work to disable updates in the top ten. , click the "Windows Update" link in it, or , set the view to large (small) icons. Next, find the item "Windows Update", then click it.
In the settings that opens, the default is "install updates automatically", click on this area to open a list of 4 options. Select the last option to disable automatic updates for Windows 7, 8. If you still want to keep track of updates, you can set options 2, 3. Uncheck the settings below as well. After making changes, click OK.
Disabling the Update Center Service
Automatic updates in this way are completely disabled in all versions of Windows. When using the method, the user stops the update service and its subsequent autoload.
Open, copy, paste services.msc into the input field, then click OK. Sort services by name for quick search service with the name "Windows Update", then double-click on it with the left button.
On the "general" tab in the service's properties window, click the "stop" button. Click on the "startup type" scope option, select "disabled" from the list. Click OK after changes.
Disabling through the Group Policy Editor
This technique is suitable for owners of Windows editions: professional, corporate, maximum. These editions have a built-in Group Policy Editor. To open it, press + R, copy gpedit.msc into the input area, then click OK.
In the group policy menu, expand the "computer configuration" section, then visit the "administrative templates" subsections, then "windows components" and select "center windows updates". On the right, find and open the item "setting automatic updates".
In the settings, select "disable" and click OK. Close the Group Policy Editor. This is how you disable Windows 7, 8, 10 updates.
To apply the changes in Windows 10, go to the update center. Click "start", then open "settings", go to the "update and security" section. Click the "Check for Updates" button.
Additional ways for Windows 10
If you have access to the Internet via Wi-Fi, then you can use this method. Works in all editions of Windows 10. Click "start", then "settings", select the "network and Internet" section. IN wifi settings, click the link " Extra options". Set a metered connection by moving the slider (see screenshot).
You can turn off automatic updating of Windows 10 Professional, Enterprise through the registry (does not work in the Home edition). Press the combination Win + R, enter the regedit command, click OK. Locate the "Windows" section ( full path on the screenshot). Right-click on this section, in the menu, hover over "create", then select "section".
Name the WindowsUpdate section, then create the AU section in it in the same way. Right-click on AU, hover over "new" and select "DWORD (32-bit) Value". Then name the newly created parameter NoAutoUpdate. Double left click on NoAutoUpdate, in the "value" area type the number 1, click OK.
The reg file makes similar entries in the registry, download it. Unpack the file from the archive to a convenient location. Run otkl-obnov.reg, click "yes" (if UAC is enabled), "yes" to confirm the registry merge and OK.
Go to the update center and click the "check for updates" button. Restart your PC to complete the process.
Now you are aware of how to disable automatic updating of Windows 7, 8, 10. Let me remind you that it is recommended to install updates, if possible, at least manually, in order to stabilize and secure the system.
It happens that users are looking on the Internet for how the procedure for banning app updates on Android goes.
The fact is that many programs are updated very often and because of this, too much traffic is spent.
In addition, in some cases, the upgrade leads to the fact that the software only gets worse, not better. Therefore, it is worth considering the banning process.
Procedure for disabling upgrades
To prevent the device from running a check for updates, you must use . This is done as follows:
1 Open the program « Play market» . It is usually located on the desktop. Even if you use some launcher, you will still find this application.
3 IN open menu select "Settings". It is located at the bottom, under the sections, account settings and wishlist.
4 In the settings at the top is the "General" section. There is a point "Auto-update apps". Actually, it means a constant check for updates and their automatic installation if available. Click on this item.
5 Another menu will open, where there are three options for further action. – "Never", "Always" And "Only via WiFi". Choose the first option. That's all, now upgrades will never happen.
By the way, if the only problem is that too much traffic is spent on upgrades, you can check the box next to the option "Only via WiFi". Then, before checking for new versions of programs, the system will also check for . If so, further actions will be performed, i.e. verification and installation.
But if you don’t need such an opportunity in principle and which are now on your device, it is better to choose the option "Never".
Even with a ban set, sometimes it becomes necessary to update some software. In this case, too, there is a certain procedure.
How to update software when a ban is set
So, you turned off auto-update, but something started to work wrong. Or some part of the functionality does not work the way you want, but in new version everything is fixed.
Then you should check their presence manually. It's done like this:
- Reopen the app play market and open the function menu (by swipe on the left).
- Open the item there "My apps and games". There, by default, the "Updates" tab will be opened. If this is not the case, go to this tab.
- Next, the system will check for the availability of upgrades and the possibility of installing them. If there is something, you will see the name of the program and the button "Update" near him. This will display the entire list of software, new versions of which can be installed. There will also be a button at the top. "Update All". It will do this with all the programs in the list below.
In addition, you can do it in another way - go to (in the settings), open the one you need and click on the corresponding button there.
Step by step, this process is as follows:
- In the same way, in the menu go to "My apps and games" but now go to the tab "Installed".
- You will see the whole list installed programs. If an application cannot be updated, there will be a button next to it "Open", and if possible, "Update". Everything is quite simple.
By the way, with this list You can prevent the installation of updates for some programs and allow others.
Prohibition and permission of upgrades of specific software
To do this, do this:
1 Click on the name of a specific program in the list of installed(via Play Market, "My apps and games" and tab "Installed"). It is important that you click on the title and not on the button.
2 On the program page, click on the additional functions button. It is located in the upper right corner. After opening it, you will see the only function − "Auto update". You can put a tick next to this inscription or uncheck it. The first action will allow checking for new versions and installing them, and the second will disable them. Everything is quite simple.
If your problem is that you only want to install certain newer versions, you can enable update notifications. This is very convenient, since the user will be able to choose whether to install a specific upgrade or not.
How to allow notifications
To do this, follow this procedure:
- Go to Play Market, open "My updates and games", go to settings.
- Find the section "Alerts" and check the box next to "Availability of updates". In principle, you can also check the box next to the inscription "Auto-update" in the same section.
After that, you can click on one of the buttons to allow or deny the installation of an update for a particular application.
It happens that users are faced with the problem of incorrect operation of the software after installing a new version.
In this case, you do not need to do all the above steps, you just need to return the old version.
If you want to return the previous version of a particular program, you can delete installed updates.
Remove installed updates
This procedure is also is done quite simply:
1 Go to settings, open "Applications" and choose the right one.
2 Press "Disable" on the program page so that it stops working. You can remove an upgrade only for disabled software.
3 There will be two prompts in a row. The first is to disable, and the second to install the original version. Confirm the actions in both requests. Click "OK".
If you still have any questions, write them in the comments. We will definitely help. But the solutions to all problems related to updating programs on Android are described above.
Loading...