Where is the mouse setting. Customizing mouse settings

On computers running in the operating room Windows system, the main control device is the mouse. The principle of its operation is based on the registration of movements and their transfer to the operating system for synchronous displacement of the pointer on the screen.

At the base of the optical-mechanical mice there is a ball-based rolling unit, the rotation of which is transmitted to the measuring system. The measured value and direction of displacement of the device is transmitted to the computer.

Optical mice, unlike optical-mechanical ones, do not roll on the surface, but slide over it, evenly illuminating it with a beam of rays. The reflected beams are registered by a sensitive element. The mouse, as it were, "sees" the microroughness of the surface and registers its displacement relative to them.

The mouse family also includes other devices such as trackballs and touchpads. The trackball is stationary, and its motion sensor - a ball - rotates with your fingers.

Trackballs, like mice, are optical-mechanical and optical.

The touchpad is a touch pad. To move the pointer, you just need to swipe your finger over it. Typically, touchpads are used in laptop computers- laptops.

Buttons are used to issue commands with the mouse. A standard mouse has only two buttons: the main (usually left) and special (usually right). If the mouse has other controls - buttons, wheels, etc. - they should be considered additional and optional.

To configure the mouse and its analogues, use the Properties: Mouse dialog box. To open it, double-click the Mouse icon in the Control Panel window (Start-Control Panel).

The most important settings for the mouse are setting its sensitivity and setting the double-click of the main button. Selection optimal settings depends on features specific model, as well as from the usual style of work.

The sensitivity of the mouse determines how much the on-screen pointer moves when the mouse is moved once. See if you can move the pointer diagonally across the entire screen without lifting your wrist from the table surface, that is, moving only your fingers. If this exercise does not work, then the sensitivity of the mouse leaves much to be desired and it needs to be increased. Reverse operation- sensitivity reduction - may be required when people who are not quite familiar with the system's reaction to their actions, such as small children, work with a computer.

Adjusting mouse sensitivity

Open the mouse properties dialog box: Start - Control Panel Mouse.
Click the Pointer Options tab.
Mouse sensitivity is set using the slider Set the pointer speed on the Move panel. The more to the right the cursor is, the more sensitive the mouse is, the farther the pointer moves at a unit displacement of the device.
It is also recommended to select the Enable enhanced pointer precision check box. With this setting, the pointer moves slowly at first and then accelerates. This improves accuracy over short distances, which is important in application programs, for example in graphic editors . In active computer games, where the mouse is used to aim the weapon at the target, this setting can have a negative effect by slowing down the reaction speed of the player.

A double click is recognized by the time elapsed between two successive presses of the main mouse button. If it is too small, two clicks are accepted and processed. operating system like one normal click. If the interval is too long, the system perceives two different clicks. The time interval at which the system registers a double click has a certain tolerance and can be configured.

Double click setup

Open the mouse properties dialog box: Start - Control Panel - Mouse.
Double-click settings are configured in the Double-click speed panel. The folder icon next to it is the scan area. If two consecutive clicks are treated as a double click, the folder's state changes - it opens or closes.
The double-click interval is adjusted with the Speed slider.

In modern mouse models, in addition to buttons, there is a wheel. It is used to scroll through documents. If such a mouse is used, the Wheel tab appears in the Mouse Properties dialog box. It is useful if the computer is often used for working with texts. By setting the scroll switch to the specified number of lines, you can set the number of lines in the document that corresponds to turning the wheel by one click. Alternative option- switch Scroll one screen at a time. In this case, turning the mouse wheel is equivalent to pressing the PAGE UP or PAGE DOWN key,

Recently, you can see more and more special models of manipulators. They are distinguished by an increased number of buttons, two wheels or other unusual controls. The configuration of these tools is provided by specialized drivers.

In fact, such an important PC accessory as a mouse has a lot of settings. Starting with visual
and ending with point options that will make the work more enjoyable and easier. And in
Today I will tell you how easy it is to do it yourself.

In order to enter the mouse control console, you need to open the Control Panel through the "Start" and
select the "Mouse" option.

Button assignment

In the window that opens, select the "Mouse buttons" tab.

Button configuration

Here you can set up variations with a change of destination
left and right mouse buttons (so-called left-handed-right-handed mode).

Double click execution speed

A little lower in the window is a scroller, by moving it left and right, you can adjust how much
the fastest response is after double-clicking the left mouse button.

Sticky mouse button

Quite a useful function, although it has a purely domestic aspect. If sticking is active, then now
there will be no need to hold down the mouse buttons when dragging folders and files. Enough for a few
seconds, hold down the button and the selected file (folder) itself will “stick” to the cursor. Well, to complete
the procedure for dragging an object, it is enough just to make one click with the mouse in the place where the file
inserted.

The "Pointer Options" tab is responsible for several important options that will simplify not only
work on a PC, but will also improve game process in different computer games.

moving

We see a slider whose movement controls the speed at which the mouse pointer moves across the screen.
Moving it to the left reduces the speed, and to the right, respectively, increases it. By the way, the more
the screen resolution is used on a PC or laptop, the smoother and slower movements appear
cursor. It's a little annoying and puts pressure on the eyes.

For the fastest possible cursor movement, you can uncheck the option "Enable high
cursor precision. Perhaps this is the most cost-effective solution for large monitors. But, in your own way
I’ll tell you from experience, almost no one bothers with setting given parameter, being content with basic
settings.

The initial position of the cursor in the window
Not a critical feature, but still useful for saving time. When activated like this
called "default button", when we open a dialog box, the mouse cursor will always be
be on it.

Cursor Visibility

A purely visual function that regulates following options cursor:
Pointer trail. When moving the cursor, it is multiplied into several copies.
Hiding the pointer. When typing on the keyboard, the cursor disappears so as not to distract your eyes
from work.
Cursor search. If suddenly the mouse cursor is not visible on the screen (especially true on white
background), just click Ctrl, and immediately a circle will be indicated, indicating exactly where the
pointer.

This tab controls the visual parameters of the pointer.

Scheme

Simply select a scheme from the dropdown list and enjoy various visual and animation
cursor effects.

In addition, each effect can be adjusted individually. Though uninformed
Users should not get involved in fine tuning, because then it will be difficult to restore
standard options.

Wheel

You can also customize the mouse wheel. To do this, go to the Wheel tab, there are not as many settings as in the previous ones, but still.

Vertical scroll

Everything is very simple here, you can adjust the scrolling speed.

Horizontal scroll

In horizontal scrolling, everything is the same.

In conclusion, I can say that only a few mouse settings are useful for ordinary people, and all
the rest are sharpened for a specific activity on a PC. However, knowledge is not redundant.
never, and I hope my information was at least a little useful for you.

Even an inexperienced user can independently configure the mouse. This process does not require any special skills and knowledge. In this article, we will talk in detail about how to set up the mouse in stages. So, you have purchased a new manipulator and brought it home. First of all, insert the mouse plug into the appropriate connector. For USB mice, this is the USB port, for PS / 2, respectively - PS / 2.

The maximum working distance is 9 meters. Here, as shown in the figure, the shape is ergonomic, and there is also a large convenient stand for our palms when writing or playing. The buttons are conditionally differentiated into two groups, even if the space is differentiated. The sculpture has a touch sensitive touchpad. The mouse looks like a blue button.

As a rule, OS Windows selects the drivers necessary for your device within a few seconds and makes it workable. In very rare cases, in order for the mouse to work, you need to install some additional software. After your new manipulator has become operational, you need to go to the computer control panel. Regardless of which version of Windows you have installed, there you will see the "Mouse" section. Feel free to go into it, and you will find yourself in the "Mouse Properties".

The tests are currently being run with a small number of users who have the ability to tweet on their 280-character profiles, which are only a handful of times. The new feature is also inspired by the reviews of the social platform with its users.

It turns out that the 140-character limit is the feature that causes the most grief among them. A curious fact is that today exactly 9% of all tweets are 140 characters long. This is not a coincidence, but it does mean that users write and edit their posts to overcome this limit. At the same time, there are no other changes in the design and the way the online store works. At some point, we can expect the company to merge the two stores on the platform of the same name so as not to confuse consumers.

How to customize mouse buttons

In order to configure the buttons, you need to select the tab of the same name in the "Mouse Properties". In it, you can swap the buttons, which is very convenient for left-handers, as well as enable the sticky function. In addition, in the presented tab, you can adjust the double-click speed. This characteristic is important for convenient opening of folders.

This architecture is capable of doing an impressive 5 teraflops of machine learning calculations in a single millisecond delay. The system can instantly complete the task, no matter how complex the operations are. The company also plans to allow external developers to join the project and, in turn, contribute to its evolution. Every attempt to improve the capabilities of AI is good news for all of us. See how artificial intelligence machines will become part of our daily lives.

Today's students use computers as part of their learning as early as their first day at school. This way, they have plenty of time to learn all sorts of office tips and tricks that will help them get the most out of their PCs. However, these two tricks will help you get closer to the full implementation of the program. - Select individual pieces of text. From the drop-down menu, select More Commands for a complete list of ways to customize the toolbar. You can even add your own macros to the toolbar.

In the "Pointers" and "Pointer Options" tabs, you can customize the appearance of the mouse pointer, as well as set its speed and enable/disable the mouse trail. If your manipulator is equipped with a wheel, you can configure it in the properties tab of the same name. In particular, in this tab you can adjust the scrolling using the wheel. This feature makes it much easier to view web pages, text documents and some other files.

The first step is to make sure you are working with data that will benefit from this method. You can use Conditional Formatting when you need to present a lot of information in a small space. But it's better to set up the score using the "New Rule" option. This screen allows you to refine the formatting to your exact specifications. You can switch to a three-color scale using the Style Format drop-down menu. You need to finish something like the image below.

Now it's much easier to get a general idea of what they're transmitting. Check the "Insert fonts in file" box. This ensures that the fonts are saved as part of the document. - Use the "Selection Panel" - this tip simplifies the slideshow process. Double-click each icon to open the Format tab. Click "Selection Panel" to open it on the right side of the screen. You can use this menu to select individual items that you can move in normal mode. Imagine that you just spent an hour jotting down notes on a topic when you know you need to present your findings to the class.

In addition to all of the above, in "Mouse Properties" you can find the "Hardware" tab. It displays data on manipulators connected to the computer. Using the "Diagnostics" button located in this tab, you can check the performance of your mouse and solve the problems that have arisen. The second button on the Hardware tab, called Properties, allows you to view information about the mouse driver, as well as uninstall or update it. In addition, in the "Properties" you can make some minor settings. For example, allow you to wake the computer from standby mode not only with the keyboard buttons, but also with the mouse.

This may seem too good to be true, but it's possible. On the Home tab, click New Slide and select Slides from Outline. Open the document containing your notes and click Paste. You should get finished slides based on your notes. If you don't like something, you can easily fix it. Do you have a mouse with a lot of buttons that you don't use? You can even replace it with keyboard shortcuts. In general, keyboarding is considered faster than using a mouse.

However, the mouse provides more convenience, and with many buttons on it, you can replace many tasks for the keyboard. You will be surprised at what you can do with the mouse. The application is available for free and additionally in Czech, so you can try it without any hesitation. In addition, its installation is simple and does not involve any risk. Once installed and then launched, it runs in the background.

At the end of the article, we note that there is no fundamental difference between how to set up a mouse on a laptop or computer. Therefore, you can use the recommendations presented to configure the laptop manipulator.

Computer mouse- one of the elements of peripheral devices, invented long before the invention of the computer itself. The prototype of the first mouse in 1968 was something that looked like a wooden iron, it was introduced by the then little-known inventor Douglas Engelbart.

Perfect for a mouse with lots of buttons

You can access it using the notification area icon, which you can easily find with your mouse. The principle of the application is very simple. For each mouse button, an application can be assigned to almost any special action that will be performed when the button is pressed. These apps are currently offering almost.

Among the actions you will find classic, often performed, work with your computer. There are also mouse-enabled options so you can easily switch between buttons. The multimedia controls are also very useful when you can pause playback, switch to another track, or manipulate the volume. You can also launch applications or open frequently used places on the desktop, such as Control Panel or File Explorer, including the selected folder. Very universal option is to set the keyboard shortcut that is executed when the button is pressed.

Decades later, Steve Jobs took this device as a basis and made it a good addition to his revolutionary Apple Macintosh.

It was then that this tailed offspring was called "mouse". In the process of evolution, they were mechanical, optical-mechanical, optical, laser.

Development continues, now trackballs, touchpads (a special touch-sensitive pad in laptops), touch points and the like can be attributed to the family of mouse-type manipulators.

This is especially useful for complex but frequently used shortcuts that no longer need to be searched for on the keyboard, but a single click of the mouse is enough. You can use all of these features with a multi-button mouse. The function of the left and right buttons seems to change no one wants, but with the middle button, moving the wheel and tipping it is a very attractive option. For any of these tasks, the application allows you to map one of the previously listed options.

How to set up custom shortcuts for mouse buttons

If you are not sure which menu in the application is the same as the mouse button, just click it and the popup menu will be highlighted in orange. All application settings must be made through the main window. You can access it through the notification area icon.

Modern mice differ in the following characteristics:

Resolution and sensor type.

The smoothness of movement and positioning accuracy depend on this.

Interface.

There are wired (PS / 2 and USB) and wireless (Bluetooth).

Number of buttons.

This number can vary widely. For a standard (non-gaming) one, two main ones and a scroll wheel are enough.

The left side of the application window contains a list of applications for which you have changed the mouse behavior. On the right, you can see which actions are mapped to individual buttons or circles. This setting can be global, which is marked "Default", or you can change the behavior on a per-application basis. This option is useful for both special applications in games and games. You can add applications through the "More" menu, where a list of found applications on your computer is available.

If the program you are looking for is not available, you will need to manually search for it. Then you just need to select a program from the list and determine what will happen in its environment after certain mouse buttons are pressed. A demanding user may be interested in creating multiple layers. Basically, there are several different configurations that can be switched.

Why might you need to adjust the mouse?

Usually the mouse starts working immediately after the computer boots up, but sometimes additional settings are required. For example: cursor type, speed, pointer behavior, sensitivity, color and other characteristics.

How to perform high-quality tuning and will be discussed further.

A handy assistant for every user

With a single mouse button, you can immediately perform an action that would otherwise lead to a difficult and lengthy journey.

It's definitely worth exploring the richness of the app's settings. For example, you can scroll a window without having to click on it, change the delay when simulating keyboard shortcuts, or define keyboard shortcuts to control the application itself and eventually disable it. Also worth mentioning is the feature of storing the current layout of desktop icons via the icon menu in the notification area. If icons go wrong, for example due to resolution or monitor switching, their position can be quickly and easily restored.

How to set up a mouse on a computer

First you need to open the control panel, which you will find in the start button. In the window that opens, find the "mouse" or enter this word in the search.

Properties will open. Options are not much different in different versions of the Windows operating system.

The average user is most interested in adjusting the sensitivity and double-clicking the right button. You can optimally configure them to suit your requirements and your usual work style in the pointer settings tab.

In the Move section, move the slider Lower/Higher as needed.

To check the sensitivity, that is, the reaction of the pointer to the user's actions, try moving the cursor from corner to corner without lifting your wrists, using only your fingers, if it works out, then this parameter is set correctly.

There is also the option to tick here. Enable enhanced pointer precision. This will give you additional bonuses in working with graphic editors, most of all in games like shooters, where an increased reaction of the player to ongoing events is required. For highly demanding games, a special resolution is expressed in dots per inch. The higher the resolution, the higher the sensitivity.

We continue to configure the mouse

Many gamepads even have dynamic sensitivity buttons. All for the convenience of the gamer, for instant response in any of the most unexpected gaming situations, when you need to position the cursor very accurately and accurately, and if necessary, quickly move it to another part of the screen by sharply pulling the mouse.

In the same window there is an option called Visibility - very interesting, you can play with it, but in the work it is almost useless thing, even more annoying and annoying.

You can turn on the indication of the cursor location when you press the Ctrl key. Perhaps someone will find this useful.

Go to the next tab in the same button window.

If you are left-handed, then it will be more convenient for you to switch the assignment of the main keys among themselves. This will enable a checkbox in the Button Configuration Area.

You can adjust the speed of opening folders and files a little lower. It's simple - we move the engine along the ruler in the direction of increasing or decreasing speed, while not forgetting to check the setting by double-clicking on the icon to the right of the ruler.

That is, the time interval at which the operating system registers a double click is configured.

If you do not want to hold down the left button while dragging some visual element (for example, a dialog box), then we recommend that you enable sticky.

This will allow, when holding the button on the object for a couple of seconds, to leave it as if in a pressed position and drag it behind you, in order to release it, it will be enough to make a click. In some rather rare cases, it can be convenient.

Here you can set the size, type and color of the pointer. To do this, there is a whole list of schemes, and in the Settings field you will see how the cursor will be displayed depending on the performance of specific tasks.

You can download some exotic cursor settings by downloading them from the Internet or downloading from system folder C:\WINDOWS\Cursors. That is, the design is configured. Here you can even turn on the shadow for the mouse.

On the wheel tab, vertical and horizontal scrolling is configured.

Here you can set the number of lines and characters for one scroll of the wheel. Scrolling one screen means that one turn of the wheel is equivalent to pressing the Page Up or Page Down key.

On the Hardware tab, you will see the name and type of your mouse. A little useful section from the user's point of view, but from here, for example, you can go to the section for viewing the status of the device and drivers by clicking the properties button.

As you can see, customizing a standard mouse for yourself is a completely trivial task that does not require special skills and abilities and is available to each user.

How to use the side mouse buttons. How to set up a mouse on a laptop. Download and install Key programs Remapper

As a rule, after buying a new mouse, you need to make settings for yourself: adjust the buttons and the wheel, adjust the sensitivity and speed, as well as the color and various visual effects. Let's figure it out today how to set up the mouseWindows on a PC or laptop.

Instructions for setting up a mouse in Windows 7

First of all, you need to go to the mouse settings:

Alternative options to go to the mouse settings:

Open "Start", go to the "Control Panel", find the "Mouse" section there;
Or "Start" - "Devices and Printers", find your mouse there and use the right mouse button to call up the properties.

What settings should be done on the mouse

After you get to the settings section, a window will appear:

A little more detail on the tabs:

Mouse buttons

Swap button assignments - a feature useful for those who work with the left hand. Left and right button change places;
Double click speed - determines the time at which the second click will be counted as a double click. If the reaction is fast, then you need to put it higher. If you do not have time to make a second click in time, then you should do it below.
Sticky - allows you to drag and drop without having to hold down the mouse button.

Pointer Options

It is in this section that you can when working on a computer or laptop. More:

Movement - the speed of mouse movement on the desktop;
Home position in the dialog box - by activating this function, the default mouse pointer will immediately be located on the button that you press most often. For example, in a dialog box, you have the choice of "Accept" and "Cancel". If you click "Accept" more often, then Windows will determine it as the preferred option and will automatically place the cursor there when a new window appears.
Visibility - here you can:
- Turn on or turn off the trace from the mouse (personally annoys me);
- Hide the pointer when typing on the keyboard;
- Indicate the location of the pointer when pressing Ctrl (a useful feature for those who often lose the mouse cursor on the monitor screen).

Wheel

In this section, you can set the number of lines that will be skipped on the screen when scrolling the wheel one click vertically. As well as the number of characters, when scrolling horizontally.

Pointers

This section of the mouse settings is designed to design the cursor. There is no need to describe, here you can choose a theme, turn on the shadow for the mouse, select the cursor image.

Equipment

In this section you can see specifications mice, drivers, etc. Nothing useful for the average user.

These are the usual settings for a standard mouse. For gaming mice, it is often necessary to make additional configurations, such as setting up macros for buttons.

Video on setting up a computer mouse on Windows

I hope the article How to set up a mouse in Windows on a computer or laptop' was helpful to you.

The mouse is the most comfortable manipulator that exists today for personal computer. It was created in 1968, but it has not lost its relevance and recognition to this day. But since each person is individual, mouse parameters cannot be averaged for everyone. That is why there is a section in the Control Panel where you can customize all the parameters of the manipulator. Setting up a mouse in Windows 7 is not difficult.

How to adjust mouse sensitivity

The first inconvenience that a user may encounter when working with a mouse is its sensitivity. IN different models similar manipulators - a different number of DPI, or optical resolution mouse, due to which, among other things, the speed of cursor movement is determined. For this reason new mouse may "run" across the screen too briskly or too slowly. Why not take it back to the store? So we will correct the not very convenient speed.

To start adjusting the sensitivity of our mouse, open the Control Panel. This can be done very easily - press the Win + R combination and enter the word control. After clicking on the standard OK, the required window will open. Here our target is the "Mouse" section, which can be seen if you configure the display of all elements.

Click on this section - a new small window will open with a bunch of tabs. Of these, one is now needed: "Pointer Options".

On this tab, you can set in detail how our cursor will move. If only its speed is of concern, it is enough to change the position of the very first slider, setting the desired amount of sensitivity. The speed can be checked right there, just by moving the mouse. At the same time, it is desirable that the increased accuracy of the installation be turned on, otherwise the pointer will hang in space, like a leaf in the wind.

By the way, if it is difficult for you to find the cursor on the monitor, you can set the display of the pointer using the CTRL key (the last checkmark) in the “Visibility” section or display its trace when moving (the first checkmark).

After making changes, it is enough to apply them, and you no longer have to suffer with a lack or excess of sensitivity.

How to set up the mouse wheel

In some cases, we, like the speed of the mouse, may not be satisfied with the operation of its wheel. As a rule, the wheel pitch of all manipulators differs in softness or speed. If it is very tight and crisp, the page may scroll too slowly, and if it is almost not felt, it may scroll too fast. Therefore, for each mouse, you can separately configure this parameter.

If you have already closed the mouse settings window, then open it again as described above and enter the "Wheel" tab. Only two settings will appear before us - to scroll the information in the window horizontally and vertically by one “click” of the wheel. First of all, we are interested in the vertical scroll, since not all mice have a horizontal one.

By the way, it's very easy to find out if your mouse supports horizontal scrolling. Try tilting the wheel to the right or left. If it works, it means that there is still support for horizontal scrolling.

In this tab, set the parameters to your liking. Remember only one thing - the fewer lines or characters will be scrolled at a time, the slower the window will scroll in principle, and vice versa. You need to select this parameter directly for the user and his device. Then you need to apply the settings and close the window for changing wheel parameters.

Other useful settings

Apart from standard parameters to the setting, you can change some specific ones. This is very useful when the use of the mouse is somewhat different from the usual, regulated by the system and the initial parameters.

Mouse buttons

Here you can adjust the mouse “for left-handedness” with the “Exchange button values” checkbox, adjust the speed of double-clicking on the left mouse button, and also enable such useful feature like sticking.

Pointers

A great tab for those who want to personalize even the mouse pointer. In total, a large number of types are available, you can adjust:

Color (black, inverse or white)
Size (from small to huge in three positions)
Appearance (modern short tail Aero or retro long tail standard).
The presence or absence of a shadow under the cursor.

(Visited 6 330 times, 1 visits today)