Full disk access c. No access to network folder

I needed to somehow transfer data from a computer to a smartphone. And there was no wire. Nothing to do, had to reinvent the wheel. In general, I opened a shared access to one of the local drives of my computer and climbed there using an android smartphone. It is rather difficult to fully describe everything in one article, so I will focus on how to share a disk in the seven for now (in the eight it will be similar). The only thing that will need to be done that is not described in this article is to set a password to log in to the system. About how to do this (I mean, set a password), many articles have been written on the Internet.

So, open "my computer" and click right click mouse over the drive we want to share. Select the "Properties" item of the Context menu. A window will open in front of us, as in the screenshot below.

A window appears as shown in the screenshot below. These are permissions to access from the outside to this disk. In my case, it is necessary that information can be read from the partition and written to this disk. Therefore, check the box "Full access" and in all previous windows click the "OK" button

What if when you try to open in Windows environment internal disk partition or external media information, the system issues a notification " Access denied"? Typically, such a notification appears if there has been an intervention in the security settings in the properties of the disk. Or if the system incorrectly determines current user as the owner of the disk, which happens when the media is periodically connected to different computers. How to solve this problem?

So, when trying to open external device information or separate section disk in Windows Explorer we see an access denied message.

At the same time, in the properties of such an NTFS disk as file system is determined, but there is no information about the occupied and free volume.

If there is no important data on the disk, or perhaps it is empty, you need to go to the management utility Windows disks and either format it or delete the partition and re-create it.

If there is valuable data on the disk, it must be extracted and temporarily overexposed somewhere before formatting or deleting the partition. How to extract?

1.Total Commander

A drive invisible by Explorer can be seen by a third-party file manager. For example, Total Commander. We try to access data in it and copy them to another, visible to the system partition or media.

2. Full disk access

If the system does not have a third-party file manager, or if an attempt to solve the problem with its participation was unsuccessful, you must configure full access for the disk in the system. In its properties, go to the security tab. Click "Advanced".

At the top, where "Owner" is indicated (or in the "Owner" tab for Windows 7), click "Change".

In the empty field, enter the value "All" (without quotes and with a capital letter), click "Check Names". The value "All" will be highlighted with a lower outline, after that click "OK".

Then click "Yes".

Now we copy the data.

3. Paragon Hard Disk Manager

Another way to get to the contents of a disk that Windows refuses access to is the Paragon Hard Disk Manager program. It has a file manager on board, with which you can view and export the contents of not only physical disks, but also virtual files. hard drives under the conditions of their mounting by means of the same program from Paragon. At the same time, not only NTFS is supported, but also a number of other file systems, such as: FAT16, FAT32, Ext2 / 3/4, ReFS. And this means that the program from Paragon will probably help us even if, when opening a disk, the system gives a notification that there is no access due to the fact that the file system is not recognized. Plus, the procedure for exporting a large amount of data will be faster than using the Windows copy tools.

We have already organized a local network and now we need to figure out how to share disk D.

Perhaps someone will ask: why exactly to this disk? Yes, because, ironically, this is the most popular knot when setting up network connections, because it comes immediately after the system C. At least when setting up a network in accounting offices, this is definitely the most popular letter.

So, guys, in fact, a very similar topic has already been discussed in detail on this blog, only there the conversation was about organizing access to the folder:

Although to be honest, these processes are absolutely identical. But today some new nuances will be additionally considered. So let's slowly start the story.

It is also worth saying that all settings will be carried out using Windows 10 as an example. But there is a complete analogy with earlier systems, such as Win 7 and 8.

So, first of all, we look for the "My Computer" section on the desktop:

In it we find the coveted disk and click on it with the right mouse button. In the context menu that opens, select "Properties":

Then follow the path "Access-Advanced setup":

In the next step, check the box next to "Share this folder":

In principle, the above settings are enough for all users of the local network to gain access to the drive with the letter D. But with this layout, all the files stored on it can only be viewed.

If you need to give the rights to edit or change the content, then you need to click on the "Permissions" button and specify the necessary permissions:

That's all, in fact, disk sharing is open. Similar actions should be done on all computers on the local network. Now let's talk about the nuances.

If suddenly all of the above actions did not lead to anything and there is still no access to it, then the first thing to do is to restart the computer. According to the author, this is the most effective technique in working with technology 😉

There are also cases when, when accessing a disk with open access The system still asks for a password. Then you need to go back to the settings section, which is shown in the picture above, and select the "Add" item. Then click on "Advanced":

In the window that opens, click the "Search" button, after which in the list that appears, put the cursor on the line "All":

Now click on "OK" and see the result of the whole operation:

What else can be said about this topic? For example, you can take note of the fact that all the described actions and settings are very convenient to perform in the popular file manager Total Commander:

At least, it is much more convenient than in the standard Windows Explorer. And if you consider that already in we will connect a network drive, then this is simply an indispensable program.

Well, okay, this topic on how to share the D drive is completed. Although, in fact, why exactly this letter pops up again, because the partitions on the hard disk

That's all for now. As always, ask your questions in the comments to the post. Whatever we can, we will definitely help.

Instruction

First, try changing the owner of a specific local drive. Turn on the computer and log in to the operating system. To do this, use any account with administrator rights. open windows explorer(My Computer menu).

Look for the icon of the local drive that you cannot access. Right-click on it and select "Properties". After launching the new settings menu, open the Security tab.

Click the "More" button located at the bottom of the menu. Open the "Owner" item. Review your current access settings disk. Click the Change button.

Now left-click on the Administrators group. It must include the account for which you are opening access. Activate the "Replace owner of subcontainers and objects" option by ticking the appropriate box. Click the "Apply" button.

Confirm the start of the process of changing the owner of the local disk. Restart your computer after following the steps above. Open each folder in turn located in the root directory of the local drive. Confirm the change of access settings for the specified folders.

Try changing the owner of the non-system partition hard drive with help command line. Open the start menu. Enter in the search bar cmd command and press the Enter key. Naturally, these manipulations must be carried out using an administrator account.

Once the console opens, type takeown /f D: /r /d y. In this example, you are changing permissions for the local drive D. If you need to change permissions for another partition, enter the appropriate letter. Now enter the command icacls D: /grant:r username:F /t. Instead of the word username, write the name of your account.

Among computer users, quite often there is a problem of access to certain resources - folders, intranet files and various other objects. In this article, we will talk about one of the ways that allows you to access certain objects inside the local computer and manage these objects at will.

Instruction

To access the modification of some registry keys, right-click on the registry subkey and select "Permissions".

Under the list and groups, click the "Add" button and enter your account name in the window that appears. Click OK, and then in the previous window, select your account in the list and in the lower section, check all the boxes under the word "Allow". This will give you full access to the required data.

Related videos

Open access to hard disks, printers, files and folders on the computer to other users of the local network by opening the network access to the named resources. You will also need to set user rights for each of them.

Instruction

call service menu desired disk right-click on its icon and select "Properties".

Check the box next to "Open Shared access access and security" and specify the network name of your drive, which is displayed in the "Network Places" folder, in the "Share" field.

Check the box "Allow changes to files over the network" to allow full access but to your disk. In this case, other users will be able to create, delete, move and rename file objects on the selected drive.

Uncheck the box "Allow changing files" over the network" to access the selected disk only in "read" mode.

Click the OK button to apply your changes. Drive to which was allowed access, will appear in My Computer as an open palm icon.

Select one of the drives on your computer and create a folder with any name that will be allowed to access from the local network.

call context menu created folder by clicking the right mouse button and go to "Properties".

Go to the "Access" tab and apply the checkbox to the "Open public access to this folder" in the "Network Sharing" section. access».

Enter the selected folder name in the "Network Share" field. The name can be arbitrary, the local and network folder names can be different.

Check the box "Allow changes to files over the network" to provide full access but to the selected folder.

Uncheck the "Allow changing files over the network" box to set the mode to "read-only".

Click the OK button to confirm the execution of the command.

Helpful advice

Sources:

Windows Electronic Encyclopedia

It makes sense to open access to hard drives V computer network some company to speed up the production process. In order to give any user the right to dispose of the data of any computer on the network, it is necessary to set the address of his computer in the access protocol. How to make a local disk open to LAN users?

Instruction

Enter the start button menu. Select "My Computer". In principle, you can do this by double-clicking on the "My Computer" icon, which is located in the upper left corner of your desktop. A window will open in front of you. Select the local drive you want to open access to. Right-click on it and select "Properties" from the menu that appears. A window will appear in front of you.

Select the "Access" tab. In it, find and select the item "If you want to open access to the root folder of the disk, click here." Check the box next to "Share this folder". You'll find it under Network Sharing and Security. Then specify the network name of the local drive, which will be displayed on the local network as a share.

Check the box next to "Allow file network changes" to open access to the local disk. After that, other network users will be able to freely dispose of the information that is stored on it.

To prevent various kinds of unpleasant moments associated with erroneous correction of information, uncheck the box next to the “Allow changing files over the network” item so that the information of the selected local disk is available to other users in read-only mode.

Apply the changes. To do this, click OK. If you did everything correctly, the selected drive will be displayed in the My Computer window as an open palm icon.

To open access to any individual folder, and not the disk as a whole, do everything in accordance with the instructions described above. If you want to restrict access to only some users, then specify their network addresses so that only they have the right to view documents on an open local disk.

One of the most common problems after reinstalling an operating system is the lack of access to files and folders of users of the previous operating system. Often, users resorted to installing additional programs to solve this problem, however, it can be solved much easier.

Instruction

Open "Folder Options" in Control Panel. In the view settings, select "Use Simple File Sharing" from the list. Remove the check mark from it, if any, apply the changes and click the "OK" button. If the system prompts you to restart your computer, take this action.

Right click on the folder you can't get to. Select "Sharing and Security" and go to the "Security" tab. A new window will appear on your screen with a warning that you cannot change the settings for this folder, the system will offer to change the owner - agree and click the "OK" button.

In the “Security” tab that is now open and accessible to you, click the “Advanced” button. You will have a new window with several tabs, go to the one called "Owner". Click once on the corresponding icon in the list to activate the administrator account. Check the box at the bottom of the inscription "Replace the owner of subcontainers", click "OK". If the Security tab was not found, boot the system into safe mode by pressing the F8 key when turning on the computer and selecting the desired item.

close everything open windows one by one by pressing the OK button. Try opening a folder that you didn't have access to before. In the security and access properties of the folder, in the user or user group selection window, click the "Advanced" button in the lower left corner and then "Search".

Select the user you need, check the boxes according to the actions allowed for him. Apply the changes, close the windows one by one and check the access to the folder you are interested in again. If you have not violated the sequence, then the directory should open without any problems.

Why is there no access to a network resource?

The reason may be the following factors:

The user does not have permission to access the share.
These rights are configured on the tab Access and are relevant only for configuring network access.
The user does not have permission to access the folder at the NTFS permission level
Customize on the tab Safety. This setting controls access rights for both network and local access.
The user does not have network access permissions or NTFS rights.

How to share a network folder with all users

Settings must be made on the computer where the network resource.

Go to Computer Management:

Opening the section Shared Folders . Highlight a subsection Shared Resources and find out the local path to the folder that is open to the network.
In our example, we see that the network resource temp matches local path c:\temp :

We find local folder, right click on it and call Properties:

1 The first thing to check is network access permissions. Opening a tab Access and press the button Advanced setup:

We press the button Permissions:

Checking for whom it is open network access, and also check permissions.
In order to enter the network resource, all users could enter the list Share Permissions need to add a group All.
In our case, full access for the group is open. All. So, everything is in order with network permissions:

2 The second thing to check is NTFS permissions. Go to the tab Safety and check the global permissions to access the folder.
In our example, we see that only users and administrators of the local computer can see and enter this folder. This means that if we try to log in to a network resource under a user who does not have account on local computer, we will be denied access.

In order to allow access to the folder to all users, even those who do not have an account on the local computer, you must add the same group to the list All. To do this, press the button Change:

We press Add:

Adding a group All and press OK.

Attention! It is NOT necessary to search for a group in the list of groups and users. You can simply write the word “All” with your hands - always with a capital letter.