Hello, I have a regional lock on my phone (I can’t insert Russian SIM cards) if I reflash it, will the regional lock disappear or do I need to change IMEI?
I tried five firmwares (I wanted to return to 7.0), only the sixth worked, without this video I would not even know what and how to do, thanks.
in Odin knocks out "FAIL" what needs to be done?
And multi-file firmware can be done in this way?
writes file and your firmware is not installed
i was able to flash to 7 androida
tell me, if you also switch to the unofficial Android 8 firmware on the same phone, will all the data on the phone be deleted? Because when you switched from Android 6 to Android 7 by air, nothing was deleted
Thank you from the bottom of my heart!!! For the selected firmware) I downloaded a lot of options ... yours came up
Thank you very much) In general, the sensor does not work on my j7 2016 with android 7 (something does not fit there), and the master said that you should always be on android 6. Tonight, for some reason, it itself was updated to Android 7, as a result, the sensor did not work. For two hours I tried to bring down the android back to 6, until I found this video, where everything is clear and clear) thanks in general)
I'm trying to flash my phone samsung galaxy J700F (single character) and it doesn't work. Almost immediately upon loading, the "Fall" tab pops up in the Odin panel and then the download stops. Reset full phone did not. This is the reason, or even such bodies cannot be reflashed at all. I brought it from Turkey, on the sticker under the battery there is a sticker "Made in Chaina"
The question is off topic. Is it possible to flash a S7 smartphone with SER Russia firmware .. I have SEK Ukraine?
I don't get shit on 7.1.2
Writes this what to do ?? Added!! Enter CS for MD5.. Check MD5.. Do not unplug the cable.. Please wait.. Checking MD5 finished Sucessfully.. Leave CS.. Odin engine v(ID:3.1210).. File analysis.. SetupConnection.. Can" t open the serial(COM) port.All threads completed.(succeed 0 / failed 1)
Detailed, step-by-step instructions on how to flash Samsung smartphone Galaxy J7 (2016) SM-J710F to the new official or custom firmware. Receipt Root rights superuser on Samsung Galaxy J7 (2016) SM-J710F, installing custom recovery TWRP Recovery.
Installation official firmware to a Samsung Galaxy J7 (2016) SM-J710F smartphone using a service Samsung programs Odin. In order to install new firmware on a smartphone, you first need to download several files to your PC:
Download Latest Official Firmware for Samsung Galaxy J7 (2016) SM-J710F
Official service multi-file firmware Galaxy J7 (2016) - J710FXXU1A
official single-file firmware Galaxy J7 (2016) - J710FXXU1AP
Before flashing your phone, you first need to decrypt it.
To unlock the Samsung Galaxy J7 (2016), you need to turn off the reactivation lock. Go to "Settings" - "Lock screen and security" - "Find my phone" and turn off "Activation Lock" Before and after the firmware update procedure, you need to do general reset device to factory settings to avoid all sorts of errors and slowdowns in the interface.
When you perform this procedure, all your data and files will be permanently deleted.
Option 1: On the device, open "Settings"\u003e "Backup and reset"\u003e " Account»\u003e "Reset data"\u003e "RESET DEVICE" and click "Delete everything"
Option 2: Turn off the device, press and hold the buttons "Volume Up (Volume Up)", "Home (Central)" and "Power (Power)" and after a few seconds the "Recovery" menu will appear. In the "Recovery" menu, select "Wipe data / factory reset" -> "Yes - delete all user data", the deletion of all user data will begin. After the process is complete, select "Reboot system now" and the device will start to reboot.
You can skip this step, but remember! If you do not reset the data, after the update, “lags” and unstable operation of the device as a whole may appear due to the tails of the previous firmware, and more recently before full reset smartphone must also be removed Google account, otherwise the smartphone may be locked.
After you have downloaded everything, unpack the archive with the driver for Galaxy J7 (2016) SM-J710F and install it. Then unpack the archive with Odin and the firmware.
Launching the program for Galaxy firmware J7 2016 Odin as administrator. To do this, hover over Odin and right-click and select Run as administrator, then click Yes.
After starting Odin, we arrange the firmware files in the following order:
The BL file……….tar.md5 is inserted into the “BL” field
The AP file……….tar.md5 is inserted into the “AP” field
Insert the CP file……….tar.md5 into the “CP” field
The CSC file……..tar.md5 is inserted into the “CSC” field
We check that the “checkmarks” are only in the fields “Auto Reboot” and “F. Reset Time”
Translation samsung phone J7 (2016) into firmware mode. To do this, turn off the phone and then press and hold the "Volume Down", "Home" and "Power" buttons and after the menu appears with yellow triangle press the "Volume up" button
We connect the smartphone using the complete USB cable to the PC and in the Odin program, in the upper left corner the inscription “COM” should appear highlighted with a blue background, after which we press the “Start” button.
Note: If for some reason your PC does not recognize your device, try reinstalling the driver and / or try other USB ports.
The smartphone firmware process has been started. After successful firmware, the device will reboot automatically and “Finish” will appear in the Odin program.
Installing custom recovery TWRP Recovery v3.0 on Samsung Galaxy J7 SM-J710
And so let's start installing custom recovery on Samsung j7
If you have not installed the Samsung drivers on your PC yet, then download and install. Then connect your smartphone to your computer using a standard USB cable. After the PC recognizes the phone, additional drivers and updates will be automatically installed before the phone is installed.
We need the Odin 3 program, download Odin
Then download the custom recovery for Samsung J7 SM-J710
Turn off your smartphone, and then (with it turned off) press and hold the “Sound down” + “Power” + home key until the phone boots into Odin mode (Download Mode). You will see a warning, confirm the desire to boot in this mode by pressing the "Volume up" key.
Transferred phone to Odin Mode, connect to PC using a standard USB cable.
Run the Odin 3 flash driver on the PC as an administrator
In the AP line, specify the path to the previously downloaded file with custom recovery J7 TWRP Recovery with the extension “.img.tar” and select it
Remove the checkmark from “auto reboot” and press start (the phone should flash, the flashing time is no more than 30 seconds, the result should be like this (succeed 1/ failed 0);
Until the firmware process is completed, do not touch the Smartphone, usually the firmware lasts no longer than 30 seconds.
Not including the gadget in working condition, directly from the mode download mode go to the newly installed TWRP Recovery by holding down three buttons (volume up + home + power button, release the buttons when Samsung appears).
All! We rejoice.
Installing custom firmware on Samsung Galaxy J7 (2016) SM-J710
To install custom firmware on a Samsung Galaxy J7 phone, you need to have TWRP Recovery custom recovery, if you don't have it, see the paragraph above.
Download on your PC any custom firmware that you like, for example - Samsung J7 Mod, FunsterROM v1.2, D_M_R_3.4 (DEODEX_MOD_ROM)
Then copy the firmware file to the phone's memory. Then turn off the smartphone and boot into the custom recovery TWRP Recovery (on the switched off phone, hold down the power buttons + volume up button + HOME)
And through TWRP Recovery install the firmware file for J710f
Go to Wipe and select Advanced Wipe
Check the boxes: “Davlik Cache”, “System, Data”, “Cache”, “Android Secure”.
Doing "Swipe to Wipe"
Go to Install -> Select the memory where the custom firmware is located, and select Swipe to Confim Flash, the installation will begin
After installation in the recovery, select the Reboot -system item and the device will reboot.
Ready! You have successfully flashed custom firmware! reboot your smartphone and use it with pleasure (without paying attention to custom firmware bugs)
Root superuser rights on Samsung Galaxy J7 (2016) SM-J710
Usually, all custom firmware already contains root rights, so to get root, you will only need to install a modified firmware. But if suddenly you do not want to install custom firmware or custom does not contain root, then follow the instructions below.
To successfully root a Samsung J7 (2016), you must have a custom TWRP recovery (you can install it according to the instructions above)
Getting Root- right.
1. Copy the file “UPDATE-SuperSU-v2.76-20160630161323.zip” to the root of the SD card.
2. On the smartphone, in the “Developer Options” section, activate “ USB Debugging” and “Unlock, provided prod. OEM”
3. We go into TWRP (with the phone turned off, hold down “Home + Vol_Up + Power”).
4. Next, go to “Installation” and find “UPDATE-SuperSU-v2.76-20160630161323.zip” on the SD card, install.
5. Click "Reboot to OS". The download will be quite long, the phone may reboot several times, this is normal.
6. Checking Root availability rights.
7. We don’t touch the “Developer options” - the activated items do not interfere with you.
After installing TWRP, you can format the “Data” partition to return to factory settings. TWRP and SuperSU are not going anywhere.
I bring to your attention a detailed step by step instructions by flashing a Samsung Galaxy J7 SM-J700 smartphone to a new official or custom firmware. Obtaining root rights on the Samsung Galaxy J7 SM-J700, installing custom TWRP Recovery.
Installing the official firmware on the Samsung Galaxy J7 SM-J700 smartphone using service program Samsung Odin. In order to install a new firmware on a smartphone, you first need to download several files to your PC:
Download the latest Official Firmware for Samsung Galaxy J7 SM-J700 – Android_6.0.1_J700HXXU2BPF2 or Android_5.1_J700HXXU1APA3
Before flashing your phone, you first need to decrypt it.
To remove the lock from the Samsung Galaxy J7 SM-J700, you need to disable the reactivation lock. Go to "Settings" - "Lock screen and security" - "Find my phone" and turn off "Activation Lock"
When you perform this procedure, all your data and files will be permanently deleted.
Option 1: On the device, open "Settings" > "Backup and reset" > "Account" > "Data reset" > "RESET DEVICE" and click "Delete everything"
Option 2: Turn off the device, press and hold the buttons "Volume Up (Volume Up)", "Home (Central)" and "Power (Power)" and after a few seconds the "Recovery" menu will appear. In the "Recovery" menu, select "Wipe data / factory reset" -> "Yes - delete all user data", the deletion of all user data will begin. After the process is complete, select "Reboot system now" and the device will start to reboot.
You can skip this step, but remember! If you do not reset the data, after the update, “lags” and unstable operation of the device as a whole may appear due to the tails of the previous firmware, and more recently, before completely resetting the smartphone, you also need to delete your Google account, otherwise the smartphone may be blocked.
After you have downloaded everything, unpack the archive with the driver for Samsung Galaxy J7 SM-J700 and install it. Then unpack the archive with Odin and the firmware.
We launch the Galaxy J7 Odin firmware program as an administrator. To do this, hover over Odin and right-click and select Run as administrator, then click Yes.
After starting Odin, we arrange the firmware files in the following order:
The BL file……….tar.md5 is inserted into the “BL” field
The AP file……….tar.md5 is inserted into the “AP” field
Insert the CP file……….tar.md5 into the “CP” field
The CSC file……..tar.md5 is inserted into the “CSC” field
We check that the “checkmarks” are only in the fields “Auto Reboot” and “F. Reset Time”
We transfer the Samsung Galaxy J7 SM-J700 phone to the firmware mode. To do this, turn off the phone and then press and hold the "Volume Down", "Home" and "Power" buttons and after the menu with a yellow triangle appears, press the "Volume Up" button
We connect the smartphone using the supplied USB cable to the PC and in the Odin program, the inscription “COM” should appear in the upper left corner, highlighted with a blue background, after which we press the “Start” button.
Note: If for some reason your PC does not recognize your device, try reinstalling the driver and / or try other USB ports.
The smartphone firmware process has been started. After successful firmware, the device will reboot automatically and “Finish” will appear in the Odin program.
Installing custom recovery TWRP Recovery v3.0 on Samsung Galaxy J7 SM-J700
And so let's start installing custom recovery on Samsung j7
If you have not installed the Samsung drivers on your PC yet, then download and install. Then connect your smartphone to your computer using a standard USB cable. After the PC recognizes the phone, additional drivers and updates will be automatically installed before the phone is installed.
We need the Odin 3 program, download Odin
Then download the custom recovery for Samsung J7 SM-J700 TWRP Recovery for firmware J700HXXU2BPF2 (OS 6.0.1)
Turn off your smartphone, and then (with it turned off) press and hold the “Sound down” + “Power” + home key until the phone boots into Odin mode (Download Mode). You will see a warning, confirm the desire to boot in this mode by pressing the "Volume up" key.
Transferred phone to Odin Mode, connect to PC using a standard USB cable.
Run the Odin 3 flash driver on the PC as an administrator
In the AP line, specify the path to the previously downloaded file with custom recovery J7 TWRP Recovery with the extension “.img.tar” and select it
Remove the checkmark from “auto reboot” and press start (the phone should flash, the flashing time is no more than 30 seconds, the result should be like this (succeed 1/ failed 0);
Until the firmware process is completed, do not touch the Smartphone, usually the firmware lasts no longer than 30 seconds.
Without including the gadget in working condition, directly from the Download mode we go to the newly installed TWRP Recovery by holding down three buttons (volume up + home + power button, release the buttons when Samsung appears).
All! We rejoice.
Installing custom firmware on Samsung Galaxy J7 SM-J700
To install custom firmware on a Samsung Galaxy J7 SM-J700 phone, you need to have TWRP Recovery custom recovery, if you don't have it, see the paragraph above.
Download to your PC any custom firmware that you like, for example - Notexperience_Rom_For_J7_V2.zip or cm-13.0-20160521-UNOFFICIAL-j7eltexx.zip
Then copy the firmware file to the phone's memory. Then turn off the smartphone and boot into the custom recovery TWRP Recovery (on the switched off phone, hold down the power buttons + volume up button + HOME)
And through TWRP Recovery install the firmware file:
Go to Wipe and select Advanced Wipe
Check the boxes: “Davlik Cache”, “System, Data”, “Cache”, “Android Secure”.
Doing "Swipe to Wipe"
Go to Install -> Select the memory where the custom firmware is located, and select Swipe to Confim Flash, the installation will begin
After installation in the recovery, select the Reboot -system item and the device will reboot.
Ready! You have successfully flashed custom firmware! reboot your smartphone and use it with pleasure (without paying attention to custom firmware bugs)
Samsung Galaxy J7 SM-J700H/DS is a branded smartphone running on Android 5.1. Here you will learn the characteristics, how to get root or reset the settings, and you can also download firmware (for Odin, for example) and instructions for Samsung.
Root Samsung Galaxy J7 SM-J700H/DS
How to get a root for Samsung Galaxy J7 SM-J700H/DS see instructions below.
If the applications did not help - ask in the topic or use complete list root utilities from the topic header.
Characteristics
- Battery capacity: 3000 mAh
- Battery: Removable
- Music listening time: 76 hours
- Announcement date: 2015-06-19
- Type: smartphone
- Weight: 171g
- Management: mechanical / touch buttons
- Operating system: Android 5.1
- Case type: classic
- Number of SIM cards: 2
- Multi-SIM Operation Mode: Alternate
- Dimensions (WxHxD): 78.6x152.4x7.5mm
- SIM card type: micro SIM
- Screen type: color AMOLED, 16.78 million colors, touch
- Type of touch screen: multi-touch, capacitive
- Diagonal: 5.5 inches.
- Image size: 1280x720
- Number of pixels per inch (PPI): 267
- Automatic screen rotation: yes
- Aperture: F/1.9
- Camera: 13 megapixels, LED flash (front and rear)
- Video recording: yes
- Max. video resolution: 1920x1080
- Front camera: yes, 5 million pixels.
- Audio: MP3, AAC, WAV, FM radio
- Headphone Jack: 3.5mm
- Max. video frame rate: 30 fps
- Interfaces: Wi-Fi 802.11n, WiFi Direct, Bluetooth 4.1, USB, ANT+
- Standard: GSM 900/1800/1900, 3G
- Satellite navigation: GPS/GLONASS
- Processor: 1500 MHz
- Number of processor cores: 8
- Built-in memory: 16 GB
- Volume random access memory: 1.50 GB
- Memory card slot: yes, up to 128 GB
- Control: voice dialing, voice control
- Sensors: proximity
- Flight mode: yes
- A2DP profile: yes
»
Firmware for Samsung Galaxy J7 SM-J700H/DS
Official android firmware 5.1 [stock ROM file] -
Samsung custom firmware -
If custom or official firmware for Samsung has not yet been added here, then create a topic on the forum, in the section, our specialists will quickly and free of charge help, incl. with backup and manuals. Just do not forget to write a review about your smartphone - this is extremely important. Firmware for Samsung Galaxy J7 SM-J700H/DS will also appear on this page. Please note that this Samsung model requires an individual ROM file, so you should not try firmware files from other devices.
What are custom firmware (firmware)?
- CM - CyanogenMod
- lineageOS
- paranoid android
- OmniROM
- Temasek's
- AICP (Android Ice Cold Project)
- RR (Resurrection Remix)
- MK(MoKee)
- flymeOS
- Bliss
- crDroid
- Illusion ROMS
- Pacman ROM
Problems and disadvantages of a Samsung smartphone and how to fix them?
- If the Galaxy J7 SM-J700H/DS does not turn on, for example, see White screen, hangs on the screen saver, or the notification indicator only blinks at all (possibly after charging).
- If it freezes when updating / freezes when turned on (requires flashing, 100%)
- Not charging (usually, hardware problems)
- Can't see sim card
- The camera does not work (for the most part, hardware problems)
- Sensor not working (depending on the situation)
Hard Reset for Samsung Galaxy J7 SM-J700H/DS
Instructions how to do hard reset on Samsung Galaxy J7 SM-J700H/DS (factory reset). We recommend that you familiarize yourself with the visual guide, which is called on Android. . 
Reset codes (open the dialer and enter them).
- *2767*3855#
- *#*#7780#*#*
- *#*#7378423#*#*
Hard Reset via Recovery
- Turn off the device-> go to Recovery
- "wipe data/factory reset"
- "yes - delete all user data" -> "Reboot System"
How to enter Recovery?
- hold and hold Vol (-) [volume down], or Vol (+) [volume up] and the power button (Power)
- a menu with the Android logo will appear. That's it, you are in Recovery!
Reset settings on Samsung Galaxy J7 SM-J700H/DS can be done in a very simple way:
- Settings->Backup & Reset
- Reset settings (at the very bottom)
How to reset pattern
How to reset graphic key if you have forgotten it and now you cannot unlock your Samsung smartphone. On the Galaxy J7 SM-J700H/DS, the key or PIN code can be removed in several ways. You can also remove the lock by resetting the settings, the lock code will be deleted and disabled.
- Reset graph. blocking -
- Password reset -
Instructions for installing the official single-file firmware on the Samsung Galaxy J7 (SM-J700x).
Drivers and programs
Attention!
To install the official stock firmware on the Galaxy J7 and return the phone's status ("Settings" > "About device" > "Properties" > "Device status") to "Official" after switching from custom firmware and thereby return the ability to receive updates over the air, just follow the instructions provided.
Installation instructions
Unzip the downloaded archive to a folder with Odin PC for convenience. The file in ".tar" or ".tar.md5" format must be left, but "SS_DL.dll" can be deleted.
Perform a data reset on the device.
To do this, go to the settings in the section " Backup and reset settings”, select the item “ Data reset» > « Reset device”, enter the PIN code (if one is set) and press the button “ Delete everything". The phone will reboot.
Run Odin PC as administrator.
Put the device into download mode ( Download Mode).
To do this, simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.
In this state, connect the smartphone to the computer. In Odin, the inscription " COM».
Click on the button " AP» and select the TAR archive of the firmware.
Items « Auto Reboot" and " F.Reset Time" must be activated, a " Re-Partition", if active - must be disabled.
Click on the button " start". The firmware installation process will begin.
At the end of the operation, if everything went well, the message “All threads completed. (succeed 1 / failed 0)". The phone must be rebooted manually by holding the power button until the screen turns off. The initial boot of the device may take up to 5 minutes.
ATTENTION!
If the device does not boot for a long time or a data reset has not been done, it must be performed from the recovery.
To do this, simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading select " Wipe data/Factory reset", and then - " Reboot system now". If after these steps the device also freezes at boot, you need to reflash it again.
Loading...