Lenovo A526 smartphone firmware. Firmware Lenovo A526 Lenovo a526 firmware

Smartphones manufactured by Lenovo, over the years of their existence, have occupied a fairly large part of the market for modern gadgets. Even the manufacturer's solutions purchased a long time ago, and among them the successful A526 model, continue to perform their functions properly. Some disappointment to the user can only be delivered by their software part. Fortunately, with the help of the firmware, this situation can be corrected to some extent. The article discusses the most effective ways pen Android installations on Lenovo A526.

Following fairly simple instructions, you can restore the Lenovo A526 that has lost the ability to start normally, as well as bring some functionality enhancements using updated software. In this case, before moving on to manipulating the device, the following must be considered.

Any procedures on sections of the smartphone's memory carry certain risks. All responsibility for the consequences is assumed by the user conducting the firmware! The creators of the resource and the author of the article are not responsible for possible negative results!

As with any other Lenovo model, before carrying out the A526 firmware process, you need to carry out some preparatory manipulations. Clearly and correctly conducted preparation will avoid mistakes and difficulties, as well as predetermine the success of events.

Driver installation

In virtually all situations where a recovery or software update is required Lenovo smartphone A526, it will be necessary to use the utility, as one of the most effective tools for working with memory sections of MTK devices. And this assumes the presence of a special driver in the system. The steps that you need to go through to install the necessary components are described in the article:

The package with the necessary drivers can be downloaded from the link:

Creating a backup

When flashing Android smartphones, the device's memory is almost always cleared, which entails the loss of user information, so it is necessary backup copy, which can be created using one of the methods described in the article:

Particular attention when working with Lenovo A526 should be given to the partition backup procedure "nvram". A dump of this partition, created before the firmware and saved in a file, will help save a lot of time and effort when restoring performance wireless networks, violated in the event of an unsuccessful installation of Android or due to other errors that occurred during the manipulation of system partitions device.

Firmware

Writing images to the memory of Lenovo MTK smartphones, and the A526 model is no exception, is usually not difficult when right choice by the user of the versions of the programs used and the variants of the files used. Like many other devices, Lenovo A526 can be flashed in several ways. Consider the main and most commonly used.

Method 1: Factory Recovery

If the purpose of the firmware is a normal reinstallation official version Android, cleaning the smartphone from various software garbage and returning it to the “out of the box” state, at least in relation to software, probably the most simple method manipulations will use the recovery environment installed by the manufacturer.

Method 2: SP Flash Tool

The use of the SP Flash Tool program for flashing the device in question is, perhaps, the most universal method repair, update and reinstall software.

Due to the rather long time that has passed since the smartphone was discontinued, software updates are not released by the manufacturer. There are no A526 models in the plans for releasing updates on the official website of the manufacturer.

It is worth noting that for life cycle Few software updates have been released to the device.

With the help of the instructions below, it becomes possible to write official firmware to the memory of a device that is in almost any state, including inoperable, due to the crash of Android or other software problems.

1. The first thing to take care of is downloading and unpacking into a separate folder of the official firmware latest version, designed to be written to the device through the program. To do this, you can use the link:
2. Due to the fact that the smartphone does not have the latest hardware components, operations with its memory will require not the most a new version utilities. Proven solution - v3.1336.0.198. Downloading the archive with the program, which will then need to be unpacked into a separate folder, is available at the link:
3. After preparing the necessary files, you should launch the SP Flash Tool - to do this, just double-click the left mouse button on the file Flash_tool.exe in the program files directory.



4. After starting the program, you will need to add a special scatter file containing information about the memory sections of the smartphone and their addressing. The button is used for this. Then the path to the file is specified MT6582_scatter_W1315V15V111.txt, located in the folder with the unpacked firmware.



5. After the above actions, the fields containing the names of the device memory sections and their addresses are filled with values.



6. After checking the fact of setting checkboxes in all checkboxes near the names of sections, you should press the button Download, which will put the SP Flash Tool into standby mode for connecting the machine.



7. Connecting a smartphone to USB port carried out with the battery removed.



8. The process of recording information will start automatically after the device is detected in the system. To do this, you need to install the battery in the device connected to the PC.
9. While the program is running, do not disconnect the device from the PC and press any keys on it. The progress of the flashing process is indicated by a filling progress bar.



10. Upon completion of all necessary procedures, the program displays a window "Download OK" confirming the success of the operation.



11. If errors occur while the program is running in the Download, you should disconnect the device from the PC, pull out battery and repeat the above steps, starting from the sixth, but instead of the button Download in this step, press the button "Firmware->Upgrade".



12. After successfully writing the software to the device, you need to close the confirmation window in the SP Flash Tool, disconnect the smartphone from the PC and start it by long pressing the button "Nutrition". Starting up after reinstalling the software takes a long time and should not be interrupted.

Method 3: Unofficial Firmware

For those Lenovo A526 owners who don't want to put up with obsolete Android 4.2.2, namely this version of the OS is received by everyone who has installed the latest official firmware in a smartphone, installing custom firmware may be a good solution.

In addition to upgrading the system version to 4.4, this way you can somewhat expand the functionality of the device. In the open spaces global network quite a large number of unofficial solutions for Lenovo A526 are available, but unfortunately, most of them have significant drawbacks, which makes it impossible to use such custom on a permanent basis.

According to user experience, the most interesting in terms of stability and functionality for Lenovo A526 are the unofficial solutions of MIUI v5, as well as CyanogenMod 13.

There are no official versions from development teams, but ported firmware carefully created and brought to a good level of stability can be recommended for use. One of the assemblies can be downloaded from the link:

Thus, understanding the procedure for installing system software in the Lenovo A526 is not as difficult as it might seem at first glance. Whatever the purpose of the firmware, you should carefully follow the instructions. In case of failures or any problems, you should not panic. We just use method number 2 of this article to restore the smartphone's performance in critical situations.

Lenovo A526 - inexpensive and stylish smartphone With big screen And high level performance, which is perfect for efficient work tasks, as well as games and other applications.

Lenovo A526 firmware allows you to restore the device's performance lost as a result of system failures, as well as get the latest version operating system Android.

Lenovo A526 firmware process

1. Download and install drivers to connect Lenovo A526 to PC.
2. Download the archive with the firmware files and extract it to a folder with a Latin name in the root directory of any of the disks.
3. Download and install the SP Flash Tools utility.
4. Disconnect the device from USB, turn off the power and remove the battery.
5. Install the drivers for the firmware mode. To do this, download and unzip the special mode drivers, open the Device Manager, connect the switched off smartphone to the computer via USB. An unrecognized device will appear in the Task Manager window for a few seconds. Quickly click on it with the mouse and open window select "Update driver", specify the location where the unpacked drivers are located and install them. If all the points are completed correctly, when reconnecting, the "MediaTek PreLoader USB VCOM Port" device should appear in the task manager window for a few seconds.
6. Disconnect the device from the PC again.
7. Launch the Flash Tool.
8. Click on the Scatter-Loading button, go to the firmware folder, from there go to the target_bin folder and select the MT6577_Android_scatter_emmc.txt file.
9. Put a tick in front of the line DA DL ALL WITH Cheksum.
10. Click on the Firmware Upgrade button.
11. We wait until the utility performs a check and goes into standby mode. We insert the battery and connect the switched off device to the PC.
12. Wait until the utility completes the firmware and a window with a green circle appears on the monitor.
13. Disconnect your phone from PC and start it.

Firmware update considerations

Do not forget to check the box next to the line DA DL ALL WITH Cheksum. Otherwise, the device will not start and you will need to re-update.

The folder with firmware files may contain a Checksum.ini file. If the file exists, then after starting the update, the program will start checking the integrity of the image. If the check does not start, then this file does not exist and you can immediately connect the device to the PC.

Some devices of the A series are not updated the first time. If you started the update process, but it did not start, then extract USB cable from the device, wait 30 seconds and connect the device again.

Video review of the smartphone

Download video and cut mp3 - we make it easy!

Our site is a great tool for entertainment and recreation! You can always view and download online videos, funny videos, hidden camera videos, feature films, documentaries, amateur and home videos, music videos, videos about football, sports, accidents and disasters, humor, music, cartoons, anime, series and many other videos completely free and without registration. Convert this video to mp3 and other formats: mp3, aac, m4a, ogg, wma, mp4, 3gp, avi, flv, mpg and wmv. Online Radio is radio stations to choose from by country, style and quality. Online Jokes are popular jokes to choose from by style. Cutting mp3 to ringtones online. Converter video to mp3 and other formats. Online TV - these are popular TV channels to choose from. Broadcasting of TV channels is absolutely free in real time - broadcast online.