Installing the system on a windows 7 flash drive. The ultimate method of reinstalling Windows from a flash drive

If you needed Windows installation 7 from a flash drive via BIOS, then our article will be a great help to you.

Installing a new operating system on a computer is a fairly common problem that can occur due to the slightest malfunction of the system or the actions of an inept PC user.

This issue also became relevant in connection with the statement of the official representatives of the Windows company about the suspension technical support XP operating system.

To date, almost all users have completely switched to the so-called seven.

Our step-by-step instructions will help you quickly and easily bring your computer back to life.

Preparing your computer to reinstall Windows

Before you start working on new software, you need to properly prepare your PC. First you need to remember what important information is stored on the computer and save it to a portable storage device.

Particular attention should be paid to the local drive C, it is on it that the largest amount of information is stored. Almost all users store their media files (photos, videos) in the My Documents folder or directly on the desktop.

These files are often located on the disk along with the already installed OS. You can also use the free space of another local disk.

It is very important before reinstalling Windows to check if there are drivers on the PC for network card.

If you install new system via USB, and then it turns out that the distribution does not have drivers for the network card, then you will not be able to configure the drivers and the Internet connection.

For your own confidence, it is better to once again make sure that the drivers are available. Also, be sure to check if you have drivers for your sound card, audio card, video card, etc.

Preparing a flash drive for software installation

To install the operating system from a flash drive, we recommend that you adhere to the following rules:

  • The minimum size of the flash drive must be 4 GB. This is the amount of space required to store all important components and files
  • Mandatory preparation of the Windows 7 distribution kit for recording and saving its image (*iso format);
  • Choosing a program to create a disk image.

Advice! One of the best utilities UltralSO is considered to create a disk image. latest version located on the developer's site

Install and run the utility on the PC, and then select the pre-selected disk image in it. Step-by-step instructions for using the program will help you quickly understand all the intricacies.

  1. launch

2. Now the main working window opens in front of you

3. Proceed to recording the hard disk image

4. Now you need to connect the flash memory and enable formatting. When the process of formatting the flash drive is completed, you can start recording.

5. At the end of the recording, there will be Windows on the space of your flash drive, with the help of which you will reinstall.

Comment! To create a flash drive to install the system through the BIOS, you can use the toolsWindows.

Configuring Bios to work with a bootable USB flash drive

One connection of the installation flash drive to a PC is not enough to install new software, it is required presetting computer so that it starts booting from it when it is turned on.

All settings are made in BIOS. Any laptop or computer has a BIOS that stores important settings, including the order in which devices should boot. It is this setting that we now need for further fruitful work.

To start the BIOS, you must hold or press a certain key on the keyboard when you turn on the computer.

You can find out which key we need from the information on the monitor. Typically, these keys are Esc, Delete, F2. If you entered BIOS, then one of the following screens will appear in front of you:

If the login attempt fails, restart the computer again and try to start the BIOS again. To make it easier for you, we have posted a table with the main options for enabling Bios.

Keyboard shortcuts to enterBIOS depending on manufacturerBIOS

Basic keyboard shortcuts for launchingBIOS depending on laptop and computer manufacturers

After you get into BIOS, you need to find the option that is responsible for loading devices. Usually it is in the menu and the word BOOT is present in its name. Other options are not excluded, you may even have to look.

Here are some examples:

As a rule, the choice of the main device for loading occurs by pressing the arrows on the keyboard, although sometimes there are other ways to control it. If you can’t figure it out on your own, then refer to the help that glows in the BIOS.

In our case, as the first boot device USB-HDD (there may be another name) is acting. After selecting it, you must exit the BIOS with saving all settings using the Save and Exit Setup item.

After this step, the computer should restart and we will move on to the main stage for which we are here.

Installing Windows 7 using a bootable flash drive

If everything was correctly written to the space of the flash drive, and the correct settings were made in the BIOS, then you will see the following message on the monitor screen in front of you, which says that you should press any key to activate the download.

If there is no such inscription, then you will have to check your actions. To do this, go to BIOS and make sure that the boot from USB flash drive setting is saved. If there are no errors in the BIOS, then most likely you were unable to create a bootable USB flash drive and you need to repeat the whole process again.

If there is an inscription, then congratulations, your installation of a new version of Windows through the BIOS has begun. Some installation images, in addition to the operating system itself, also contain various additional programs, then you will have to select the required item from the menu.

It is also worth saying that some of the disks by default perform most of the settings described below. You should not worry about this, since all settings can be changed after the software installation process is completed.

A welcome screen appears in front of you, on which you select the desired data. After the configuration is done, you should click on the "Next" button, and then "Install".

In a new window, the terms of the license agreement appear in front of us, which you, of course, read very carefully, and then agree by checking the box in the designated box and clicking the "Next" button.

The final stage of installation

In the new window, you will have to choose which type of installation we want. We need a complete type. Next, you will have to work a little with the disk, on the space of which it will be written a new version software.

To do this, select the required disk partition in the menu and click on the "Disk Settings" button, after which we start formatting.

We have already described how this is done above. Here you just need to change from USB-HDD to the name of your drive. This is a very easy action that should not cause you any difficulties.

Once the reboot is complete, Windows Setup will continue.

  1. We enter names for the computer, laptop and for users.
  2. Set a password if needed.
  3. We enter the name license key, if it exists (you can skip this step).
  4. Select security settings ("Recommended settings").
  5. Set date, time.
  6. We are setting up the network.

Thanks to these simple steps, you can install Windows 7 through BIOS using a USB flash drive.

Not every user has a DVD drive, moreover, rare PCs are equipped with them lately. But you still need to install the system, and for this it is most convenient to use a bootable USB flash drive. Let's figure out how to install Windows 7 from a USB flash drive - after all, you won't buy a DVD for this purpose.

Before proceeding to the installation, carefully study this article: various difficulties may arise in the process, which can be solved using one of the methods described below.

The installation process itself can be divided into the following steps:

  • downloading the installation image;
  • computer preparation;
  • creating a bootable flash drive;
  • PC BIOS setup;
  • Windows 7 installation.

Let's consider each stage in more detail.

Before you write the image to a USB flash drive and install the system from it, you need to download it. Today, there are a huge number of ready-made assemblies of the operating system, which are equipped with many applications and functions.

Very often, these distributions change the default theme or sound scheme. But not all users like such innovations. You only need to download original images created by Microsoft. A huge staff of the world's leading programmers does their job better than some artisanal modifier.

A little lower you will find a button by which you can download a torrent file for downloading the Russian version of Windows 7 with 32 or 64-bit architecture. The file is taken from the official Microsoft website and is completely original. Start downloading, and when the download is complete, proceed to the next step.

After the file is downloaded, open it with a torrent client. If you do not know how to work with such programs, follow our step by step instructions.

  1. First, download the torrent client itself. This will be the qBittoorent app.
  2. Install the program and open the previously downloaded torrent file with it.

  1. We select the version of Windows 7 (in our case it is professional 64 bit) and click "OK".

  1. After that, the operating system will start loading at the maximum available speed.

Getting ready to install Windows 7

First of all, you need to copy to a safe place all the important information for us located on drive C. Each user stores data in his own way, so everyone has their own choice of folders for backup. Most often these are folders: "Downloads", "Desktop", etc.

You can save files to another logical drive (the one on which the system will not be installed) or to external drive. You can also use cloud storage if there is not too much data. For example, the Mail.ru cloud provides 100 GB of free space for free.

With an eye to the future, remember: during the operation of the PC, you need to store your data on a drive other than the one on which the system is installed. Divide the physical disk into sections and save your files on any of them, except for the system one. For installing Windows 7, a volume of 70 - 100 GB will be comfortable (depending on the type and amount of software used).

Another crucial point that should be considered before the installation starts is the drivers for our network card. If at the end of the installation of Windows 7 it turns out that there is no driver for the network card, additional difficulties will arise that will have to be solved using a second computer by transferring files from it via a USB flash drive.

If the computer was just purchased, there is no valuable information on it and cannot be, feel free to proceed to the next section, without copying the data.

Create a bootable flash drive

In order to create bootable media and start the operating system installation procedure, we need:

  • USB stick with 8 GB or more. Instead of a USB flash drive, you can also use a simple memory card with a card reader;
  • installation distribution kit "Seven" with the extension .iso;
  • a utility with which we will write the image to a USB flash drive;

Attention! Before you start creating the installation media, remember that all data on it will be irretrievably destroyed.

Making installation media using Ultra ISO

A well-known disk imaging program can create boot drives. Consider the algorithm Windows entries 7 to a USB device.

  1. Download and install the Ultra ISO program from the link.
  2. Run the resulting file and check the box "I accept the license agreement." Proceed to the next step by clicking "Next".

  1. Using the "Browse" button, select the installation path, then click on "Next".

  1. We don’t change anything here and just move on.

  1. The program is being installed, we are waiting for its completion.

The Ultra ISO installation is complete, you can run it and go straight to creating a USB flash drive for installing Windows 7.

  1. The Ultra ISO program can be run in trial mode, so its functionality will not suffer in the least. Click on the button shown in the picture.

  1. Go to the "File" menu and click on the "Open" item.

  1. Choose the downloaded by us Windows image 7 and then "Open".

  1. Go to the "Startup" section and click on the item that we marked in the screenshot.

  1. We look so that the media we need is displayed in the devices at the top of the window and click on the "Format" button.

Attention! This will destroy all your data beyond recovery. If you have the necessary files on the USB stick, save them first.

  1. In the next window, just click "Start".

  1. Ultra ISO will once again warn us that all information from the flash drive will be erased. Click "OK".

  1. After formatting is completed, click on "Write".

  1. The process of recording "Seven" on a USB flash drive has begun. It will take about 5-10 minutes depending on the speed of the drive and the selected OS version.

Recording completed, our media can be used.

Consider a few more options for creating bootable media with Windows 7.

Rufus

This is another program that can create a bootable USB flash drive with Seven. First, let's download it.

The application, unlike Ultra ISO, does not require installation, so you can run the downloaded file and immediately proceed to the process of burning the OS to a USB device. To do this, we do the following:

  1. Select a recording device. This will be our flash drive, in this case - 16 GB. Then click on the disk icon.

  1. We select the distribution kit downloaded by us in the PC folder.

  1. We begin the recording process with the "Start" button.

  1. Rufus will notify us that all files will be deleted from the flash drive. If you have already created backup or there was no important information on the media, click "OK".

As a result, Windows 7 will be written to a USB flash drive, after which you will have a full-fledged installation media at your disposal.

Attention! Before you start the process of writing the system to a USB flash drive, be sure to save all the data on it - otherwise they will be irretrievably lost.

As we see, this way turned out to be much simpler than the previous one, but we will not dwell on this and consider several more options for burning Windows 7 to a USB drive.

Making a bootable USB flash drive using WinSetupFromUSB

Another application focused solely on writing operating system files to an external drive. Let's take a utility and look at the process of working with it.

  1. We select the path along which the program will be unpacked (click on the button with the image of three dots) and click "Extract".

  1. We are waiting for the end of unzipping all the necessary files.

  1. We open the directory into which the unpacking was carried out, and run the program, depending on what architecture your operating system is built on. We have it 64 bit, respectively, we click on the marked file.

  1. We insert our USB flash drive into the USB port and make sure that it is displayed in WinSetupFromUSB. Next, check the box marked with the number "2" in the screenshot. When the bird is placed, click on the icon with the image of three dots, marked with the number "3".

  1. Select the image of our operating system and click on "Open".

  1. It remains only to press the "GO" key and the recording of Windows 7 will begin.

Windows 7 is being written to an external drive. Once the process is completed, the flash drive can be used to install the system.

We will not stop at WinSetupFromUSB and will tell you how to burn the OS to media using the Windows 7 USB / DVD Download Tool from Microsoft.

Windows 7 USB/DVD Download Tool

This is the official application from Microsoft, so it should be the one that, in theory, should best cope with the task of burning Windows 7 to a USB flash drive. Let's get started with the program.

  1. First, download the utility from the link from the official site. Then run it and click on the "Next" button.

  1. We are waiting for the program to install.

  1. We complete the installation process by clicking on the “Finish” button.

  1. We proceed to work with the program. Initially, you need to specify the file that we will write. To do this, click the "Browse" button.

  1. After the path to the image file is registered, you can proceed to the next step - click "Next".

  1. Here you should select the type of media on which we will put the "Seven". Since we have a USB flash drive, we click on "USB device".

  1. We look for our drive to be displayed in the field marked with the number "1", and click on the "Begin copying" button.

  1. After that, we will be warned that all information from the media will be erased and after confirmation the process starts Windows Migration 7 to a USB stick.

Upon completion, we will receive a bootable USB flash drive, with which it is easy to install OS on a computer.

The program requires the Microsoft .NET Framework 2.0 library. If you do not have it, then download the program from the official Microsoft website.

We use the UNetBootin program

The UNetBootin utility is completely free. you can download it without registering or sending SMS. The program does not need to be installed - it works immediately after downloading. An application was created not only for writing to a Windows flash drive, but also for other operating systems, such as Linux or Mac OS.

We proceed to the instructions for working with the application.

  1. First of all, set the checkbox to the “Disk Image” position and click on the button with the ellipsis image. In the window that opens, we need a Windows distribution.

  1. In the drop-down list marked with the number "1", select the USB device, indicate our flash drive and click "OK".

  1. The application will warn us that all the data that is already on the flash drive will be irretrievably lost. If we do not need them, click "Yes to All".

The distribution package is being written to the USB device. After it is completed, the USB flash drive can be used to install the OS.

Command line

You can create bootable media with the Seven without using any programs by the forces of the system itself. For this we will use the command line.

The whole process is described in the form of detailed step-by-step instructions, each step of which is accompanied by a screenshot for clarity.

  1. Initially, we start the command line. This must be done exclusively as an administrator. We will create bootable media using the example of Windows 10, but in the same way you can get the result on Windows 7 - 8. Press the Win + R button combination and press the "Browse" key in the window that appears.

  1. We follow the path indicated in the screenshot by the number "1" and find the cmd application. We click on it with the right key of our manipulator and select "Run as administrator".

  1. We write the command diskpart on the command line and press Enter.

  1. To start writing to a disk, you must first select it, and take this choice responsibly, because all data from it will be deleted. You can view the list of disks using the operators: "list disk", "list volume" or "list partition". The first two show the list of disks, the third shows the number of partitions and their names. Insert the flash drive into the USB port and enter the command "list disk" in DISKPART. Then press Enter. You will see a list of all drives installed on this moment in PC.

  1. We select the disk that we need. To do this, enter select disk disk_number. The disk number can be viewed in the last step, we have it "1" since its size is 14 GB, which corresponds to our flash drive.

  1. Remove the disk with the clean command. Check again what you've done right choice– all data on the media will be completely deleted.

  1. Now we need to create the main partition for the flash drive, from which we will boot in the future. Enter the create partition primary command and press Enter.

  1. Set the drive letter using the assign letter=drive_letter operator. Let's do that. We know that our PC has drives C, D and E, so we specify F. The final command will look like this: assign letter=F.

  1. You can also specify the partition size. If this step is skipped, it will take all free place. You can set the size of a logical disk using the create partition primary size=disk_size command. The size must be specified in megabytes.

  1. We select our disk using the select partition 1 command (specify your disk number) and press Enter.

  1. Now we need to make our section active. To do this, use the active statement.

  1. It remains to format the flash drive - we prescribe a command like: format fs = fat32 quick.

  1. Exit DISKPART using the exit command. Now we need to prepare the files for recording. We unpack our Windows 7 image using any archiver (we will use the usual WinRAR) and extract all the files to our USB flash drive.

The installation media is ready, you can use it.

We use the program WinToFlash

Let's describe the process of working with another program for burning Windows 7 and other operating systems to a USB drive. To get started, download the utility from the link from the official site.

  1. Install the program and run it. In the window that opens, select the item marked with a red frame.

  1. At the very top, select "Windows", then specify Windows 7 and press the button indicated in the screenshot by the number "3".

  1. Specify the path to the Windows 7 image that we downloaded. To do this, click the "Select" button.

  1. Click on "Add".

  1. We make sure that the flash drive we need is indicated as the target, and click "Run".

After that, the process of creating bootable media with Windows 7 will begin, after which the device will be ready for use.

Write a bootable USB flash drive using WinToBootic

This application is one of the simplest tools for writing operating systems to external media. To work with the utility, you do not need to install it, nor do you need administrator rights. It will work like Windows files, and with her images. The local interface is simple, and the speed of the program pleases.

To write Windows 7 to a USB flash drive using WinToBootic, do the following:

  1. First, download the program from the link and run it. Check the box next to "Quick Format" and click "Do It!".

  1. We answer in the affirmative to the request when formatting.

  1. We are again notified that all data on the flash drive will be deleted. Don't forget to save important information from the media, if it is there, and click on "OK".

  1. The preparation of the flash drive is completed, click "Thanks!".

  1. Next, select the files that will be written to our flash drive. To do this, click the icon indicated in the screenshot, and select the image we need.

  1. Press the button to start the process again.

The recording of Windows 7 to the USB flash drive will begin. When it ends, the device can be used to install the system.

How to boot from a flash drive

To successfully install Windows 7 from a USB flash drive, it’s not enough for us to simply burn the operating system to media, we also need to make the PC boot not from a hard drive, but from a USB drive. This can be done in two ways: either by modifying the BIOS, or through a special boot menu.

With regards to boot menu you can tell it starts different keys, depending on the model of the computer or laptop. You can see which button is responsible for this on your device in the instructions for it. We provide a list of combinations for the main brands of computers and laptops:

Launching the Boot Menu on a PC:

Launching the Boot Menu on a laptop:

The following is a list of keys that launch the BIOS on different computers and laptops:

For clarity, we will show the process of installing a flash drive as the first boot device on the example of our PC with motherboard Asus:

  1. We turn off or restart the computer and after starting it, press the button to go to the BIOS (we have it Del).

  1. This is what the BIOS looks like.

  1. Go to the Boot tab.

  1. We install our USB drive as the first device.

The process is similar on different computers, although the names of the tabs and items may differ. In order to understand how to enter the BIOS of your PC, read the instructions for it.

Installing Windows 7 from a flash drive

After the BIOS has been configured, you can proceed directly to installing Windows 7 from a USB flash drive. Let's get started.

  1. Immediately after the system starts, you will see the following window (the data for installing Windows 7 is being preloaded).

  1. Set regional options. Select the system language, region of residence, and keyboard layout. If desired, all this data can also be specified after Windows starts. When the setup is completed, click on "Next".

  1. In the next step, just click "Install".

  1. It remains to accept the license agreement, and the installation will begin. Check the box as shown in the screenshot and click Next.

  1. Choose a mode complete installation- this is the so-called clean option, when all the old data is on system partition are removed.

  1. We got into the partition settings menu. Click on the entry circled in red.

  1. If your disk is not partitioned, you can do it here (for Windows 7, it would be best to use about 100 GB of free space, the rest will become the D drive). Don't forget to format your system partition before installing Windows on it. When the operation is completed, click on the "Next" button.

  1. Finally, the installation of Windows began. We are waiting for the process to be completed.

  1. Next, the system will reboot and we are greeted by the Windows startup screen

  1. Initial optimization in progress. The system prepares all the necessary files.

  1. System services begin to start.

  1. After which we proceed to complete the installation of Windows

  1. We are again told to restart the computer.

  1. The system will check how productive our video card is.

  1. Now we need to enter our details. We write an arbitrary name and the name of the computer. Then click "Next".

  1. If necessary, you can set a password that the system will ask for when it starts. We miss this step, since the computer will be at home.

  1. If you have a Windows 7 key, you can enter it here, however, you can do it after the system starts. We are skipping this step.

  1. Choose the system protection option depending on your personal preferences. We will be installing another antivirus, so we won't need a regular one.

  1. Specify the time and time zone. Then click "Next".

  1. Decide on the type of network. This is a rather important step, because if we specify the home network, and we are connected to the public one, our security will suffer greatly.

  1. The settings are being applied and the network is automatically configured.

  1. Last minute of optimization before our Windows 7 is launched.

As a result, we installed Windows 7 from a flash drive, the creation of which was described above.

Instead of an afterword

We have considered a lot different programs and the means of Windows itself in order to answer the question: how to install Windows 7 from a USB flash drive. However, these are not all options. There are many such programs on the web. They differ in their convenience and functionality. Some utilities are better suited for ordinary users, while others are better for professionals.

Which method you choose and how to burn Windows 7 to a USB flash drive should be determined from purely personal preferences. Use the option that you like, and if you have any questions, ask us in the comments. We undertake to provide a comprehensive answer as soon as possible.

Quite often there is a need to install a new operating system. This is still relevant now, given the fact that in mid-April this year, Microsoft officially announced the termination of technical support for Windows XP. It will still take no more than 3-4 years before all users completely switch to Windows 7. And if you want to know in advance how to install Windows 7 from a USB flash drive, then this article will give you the information you need.

Installation takes place in several steps:

  1. Preliminary preparation of the user's PC for the installation of Windows 7;
  2. Preparing a USB flash drive for installing the operating system;
  3. BIOS preconfiguration for reading information directly from a USB flash drive;
  4. OS installation via USB.

Let's take a closer look at each stage.

Preparing your computer for installation

Before installation new Windows 7 you need to prepare your computer first. First of all, the user is advised to save all important information contained on the computer. It is worth paying attention to the local drive C, since it is there that the largest amount of information is stored. Most users store some of their media files on the desktop or in the My Documents folder, which are located on the drive with the operating system installed. In order not to lose some important files, you need to copy them either to another local drive, or save them to USB or other digital media.

Another important point that you should always remember: before installing, you need to check for drivers for the network card. If you install Windows 7 via USB, and then it turns out that the distribution did not have drivers for the network card, you will not have the Internet or drivers. Therefore, play it safe once again and check for drivers. And immediately check for other drivers - for a video card, for an audio card, drivers for a sound card, and so on.

Preparing the USB for Installation

To prepare a USB flash drive for installing Windows 7, you need to follow these guidelines:

  • The volume of the flash drive should be at least 4 GB - that is how much space is needed to be able to install the OS without losing important files and components;
  • You will also need a Windows 7 distribution, which will be written and saved in *iso format (disk images);
  • A utility that will help create a disk image. You can use almost any program (you can use UltraISO).

After you have installed and launched the imaging program on your computer, you must select a disk image that has been previously prepared for recording. We'll take a look at the usage example UltraISO programs- it is quite simple and understandable for all users.

A memory card or USB flash drive is connected to a computer, formatted and Windows 7 is written to it, which can then be installed on a computer through the same flash drive.

BIOS setup for installation

Is the flash drive ready for installation? There are a few steps left before the actual installation. There is one important nuance: you need to “force” the computer to recognize the USB flash drive and allow you to install Windows 7 from the USB flash drive. And the BIOS will help in this matter. It is available on all computers, and in addition to many different functions, it allows you to change the boot order from external media.

The first step is to go into the BIOS. During the initial boot of the computer, you need to press a certain key (this is either F2, or Esc, or Delete). You will know that you have launched the BIOS after one of the screens appears in front of you:

The next step is to find a section through which you can configure the boot order from external devices. This section is called Boot, and it displays all the devices that are connected to the computer in boot order ( HDD, CD/DVD media, USB port). Using the arrows on the keyboard, you need to make sure that the USB port is in the first place in terms of relevance, then press the F10 button, which saves the changes and restarts the computer. Now the computer is completely ready for the installation of Windows 7 using a USB flash drive.

Installing Windows 7

After inserting the flash drive into the port, a black screen and the inscription “Press any key” will appear. Press any button - immediately after that the process will begin automatic installation Windows 7.

You will be presented with a welcome screen, prompting you to select your language, time format and time zone, and keyboard layout. All chosen? Now click the “Next” button and immediately after that, the “Install” button.

The installer will prompt you to choose the version of the operating system that will be suitable for you in terms of its functionality. After choosing, click “Next” again, agree with license terms and select the partition on which you want to install Windows 7. Have you chosen a partition? Now click the “Next” button and wait for the USB installation process to complete.

Hello dear readers! It is obvious that even neat and not the most active users PC sooner or later it becomes necessary to reinstall the operating system. A computer running on the same OS for a long time starts to work slower, new errors appear and make it difficult to work with the device normally.

That is why it is recommended to periodically reinstall the system. Here the question arises: how can this be done if the distribution kit is not at hand on the disk? There is only one answer - using a flash drive. This guide will help you quickly figure out how to properly reinstall Windows 7 from a USB flash drive without any problems - debriefing will take a maximum of a few minutes!

Preparation for the upcoming procedure

Before starting the reinstallation procedure, you need to prepare:

  • Copy from system disk(usually "C") all the necessary and valuable information for you to another section of the hard drive, but rather to removable media. During the reinstallation process, data from the local drive "C" is erased as a result of formatting, so it is recommended to duplicate necessary information.
  • Prepare in advance all the drivers you need for your devices to work. It often happens that after Windows is reinstalled, some external devices stop working for lack of drivers. In order not to encounter this problem, you will have to look for the driver yourself before the procedure.
  • Make sure that bootable flash drive with the OS distribution was written correctly. Check if all the files from the image are on the media - for this, it is enough to compare the number of files and the volume. If not all the data is on the flash drive, it is recommended to overwrite it so that there are no problems during installation.

Now that everything is ready, you can start installing Windows 7 from a USB flash drive. Do not be afraid ahead of time - this procedure is performed much easier and faster than it might seem to the user, especially the inexperienced one.

BIOS setup to properly reinstall the OS

BIOS is the place where all the parameters of your PC are registered, be it a computer or a laptop. These include system boot settings. In order for the device to start up from a flash drive, you need to configure the BIOS to work with it. It's pretty easy to do - just follow the instructions below:

  1. Insert the media into the USB port and restart the PC.
  2. Press the F2 key during reboot. In some BIOS models, you must press F11 or Delete. More detailed information you can find out at the start of the OS - everything will be written in white on a black background.
  3. In the BIOS menu that opens, select BOOT (name may vary). After that, a list with devices from which the system can boot will open. Select your media and move it to the first place using the keys on your keyboard. Save the changes by pressing F10 and confirming the exit from the BIOS.

After BIOS settings you can proceed directly to such a thing as Windows installation 7. How to do it?

Reinstalling the system in a few easy steps

In fact, you have already done the most difficult at the previous stages - the installation of the system itself is carried out practically in automatic mode. However, we recommend that you read the following instructions:

  1. Insert the media into the USB port and restart your computer. The download should come from your flash drive.
  2. Wait for the installer's welcome window and follow the instructions it offers you.
  3. At the stage of selecting a disk for installation, specify the system partition, format it and click "Next".
  4. Wait until Windows 7 is installed on your PC - this procedure is performed automatically.

During the installation, the PC will restart several times. In the final step, you will be prompted to enter the PC name, date and time settings, and administration options. At these stages, there will be no problems.

After you specify all the data, you will need to wait a few more minutes - after configuring the OS, you can start working - this completes the procedure for reinstalling the operating system!

Share the article with your friends using social networks- they will be grateful to you when they learn how to install the system from a USB flash drive! Subscribe to updates to always be aware of the latest blog articles!

Detailed description of several installation methods Windows 7 or Vista from a flash drive or memory card to any laptop, netbook or computer. The methods described below are also applicable to Windows 8, 8.1 and 10

An introduction to installing Windows from a flash drive

This guide will cover the installation Windows 7 and Vista from a flash drive or memory card. The guide is intended primarily for novice users. It can also be used to install Windows 8, 8.1 and 10 .

This site has already described how to install Windows Vista() and Windows 7(). Everything would be fine, but what if there is no DVD drive? But this is a fairly common situation. It is usually faced by owners of netbooks, portable laptops, as well as those who simply do not have DVD drive or just no disk.

Fortunately, this problem has a simple solution: you need to write the installation files to a USB flash drive or memory card, and then it will boot and install the system. How all this can be done, we will consider in the framework of this material.

Preparing for installation

Before installation Windows 7 or Vista you need to copy all the important data from the partition on which you are going to install the system to another partition, to a USB flash drive or to another computer. Do not forget that by default documents, desktop contents and programs are located on the system partition. This is due to the fact that for the so-called "clean" installation of Windows, you need to format the partition on which you will install Windows.

Important note: if you are installing Windows 7 instead of the pre-installed Windows 8, 8.1 or 10, then it is recommended that you familiarize yourself with the very important features of this process: Removing pre-installed Windows 8 .

In addition, it is recommended to download and save a set of drivers for your device in advance. This recommendation is due to the fact that the Windows distribution may not initially contain drivers for your network card, WiFi adapter or your modem. As a result, on a freshly installed system, you will not be able to access the Internet and download the required driver. Not the most pleasant turn of events. In order not to fall into this vicious circle, it is recommended to download everything in advance. In more detail what drivers are needed and where to download them is described at the end of the article.

The installation of Windows 7 or Vista can be roughly divided into the following basic operations:

  1. Preparing a flash drive or memory card with Windows 7 or Vista;
  2. Enabling boot from a flash drive or memory card in the BIOS;
  3. Direct installation of Windows;
  4. Search and installation of drivers;
  5. Installation of utilities and programs.

Let's start preparing the flash drive.

Preparing a flash drive or memory card with a Windows 7 or Vista distribution

This guide will describe three ways to burn a distribution from Windows Vista or Windows 7 to a USB flash drive. In terms of complexity, the first method is easier than the second, and the third is a little easier than the first.

The first way to install Windows from a USB flash drive

To install Windows in the first way, we will need:

  1. operating system distribution Windows system. It is recommended to use the original MSDN builds as they have the fewest unexpected problems. Since recently Windows distributions 7 can be downloaded from the Microsoft website after entering the serial number;
  2. A set of utilities that you can download from the links: / ;
  3. Flash drive or memory card with a capacity of 4 GB or more. It is advisable to use a flash drive or an external USB-card reader with a memory card. This recommendation is due to the fact that not always a laptop, tablet or PC allows you to boot from a memory card in the built-in card reader.

Important note: if you do not know which version of Windows to install on your laptop (32-bit or 64-bit), then I recommend that you familiarize yourself with this material:. I also recommend viewing this article:. It will help you in choosing the version of the operating system, as well as give answers to many questions.

First, copy the image of Windows 7 or Vista in the format iso to the winchester. Then install and run the utility UltraISO, which is present in the archive at the links above. A window like this should open:


Since we are using the demo version of this utility, we click on Trial period. Now you need to open iso operating system image. To do this, click on the menu File -> Open...:


Specify where the image with the operating system is located:


and choose the item Burn hard disk image:


Now we insert a USB flash drive or memory card into a laptop or computer.

Important note: the contents of the flash drive or memory card will be deleted during the process of writing a system image to it. Therefore, it is necessary to copy all important data either to the hard drive or to another computer.

Click on the button Format:


Select the file system type and click To begin:



Now we press the button burn:




That's all. Now you have a memory card or flash drive with the system.

Consider now the second method. It will be more difficult.

Second way

As in the first method, we need a distribution kit with an operating system (on a disk or in the form iso image) and a flash drive / memory card with a capacity of 4 GB or more.

Important note: before starting preparation, you must copy all the necessary information from a USB flash drive or memory card. It will be formatted and all information on it will be deleted.

First you need to insert a USB flash drive or memory card into a laptop and run command line (this can be done through the menu Start, and through Run(press Win + R) with the command cmd). It looks something like this:


We enter the command diskpart and press Enter:


To display a list of all storage devices, enter the command list disk and press Enter:


The flash drive in the screenshot above appears as Disc 2. You may have it under a different number (1, for example). Enter the command select disk 2 and press Enter(2 is the disk number. If you have a flash drive numbered 1 (Disk 1), then you should enter the command select disk 1. It is very important!):


Enter the command clean, which clears the selected disk, and press Enter:


Enter the command create partition primary:


Now we need to select the first section. To do this, enter the command select partition 1:

:

Enter the command active:


Format the partition. To do this, enter format fs=NTFS and press Enter:


Assign a letter to the flash drive using the command assign letter=Z:


After that, a flash drive should appear in the system. We enter the command exit and press Enter:


Now we copy all the files from the disk with the distribution kit to the USB flash drive. If you have an ISO image with the distribution, then I recommend using the utility 7-Zip, which you can also find in the archive via the links above ( / ). Install this utility and select iso Windows image:


Click on the button Extract and specify your flash drive:



That's all. With the second method sorted out.

The third easiest way to install Windows 7 or Vista

The third method is detailed in this guide:. Everything is simple and clear even for a complete beginner.

So. Finished with the preparation of the flash drive. If at this stage you have problems, then you can ask for help in these forum topics: and. Please be sure to read the thread before asking. With a high degree of probability, your problem has already been raised and has been resolved. So you save your time.

As a result, the flash drive should contain approximately the following files and folders:


Let's move on to the second point.

Enabling BIOS to boot from a flash drive or memory card.

We turn off the laptop, netbook or computer, put a USB flash drive or memory card into it and turn it on. This is very important since some laptops and other equipment do not recognize flash drives in the BIOS that were inserted after being turned on. It should also be noted that not all laptops and netbooks are able to boot from a memory card that is inserted into the built-in card reader. In this case, you need to look for either an external USB card reader, or look for a USB flash drive.

We go to laptop BIOS. To do this, at the beginning of the laptop boot, you need to press a certain key. As a rule, when loading, at the bottom of the screen it is indicated which button to press to enter the BIOS. Most often this F2, Del, Esc and others. How to enter the BIOS should be described in the instructions for the laptop and at the bottom of the screen when loading the BIOS.

After entering the BIOS, you need to find where the boot order is configured. Usually these settings are located on the tab BOOT. Buttons are usually used to change the boot order. F5 and F6, sometimes something like a menu is used. Click on the item and select the device. As a rule, on the settings page it is indicated which buttons can be used to change the download list. How to change the boot order should also be indicated in the instructions for the laptop.

Install your flash drive or memory card on first place in the download list. Flash drives usually act as USB-HDD. The load order should look something like this:


After saving the settings, a reboot should follow. Now you can proceed to the installation of the system.

Direct installation of Windows 7 or Vista

Installation Windows 7 and Windows Vista from a flash drive or memory card completely similar installation from disk. The procedure itself is described in detail in the manuals: and. Pay special attention to operations with partition selection for installation and disk operations.

Finding and installing drivers

So. Windows you installed. Now you need to take on the installation of drivers.

Since this guide is designed primarily for beginners, we need to say a few words about what a driver is and why it is needed. I think it's no secret to anyone that a laptop, computer or other similar device consists of a great many components like motherboard, network card, video card, sound card. In order for the operating system to be able to fully work with them, some kind of connecting link is needed. This link is the driver. AT Windows, as in many other operating systems, many devices already have drivers. Yes, they somehow work, but they will not allow you to fully use the opportunities various devices on your laptop or computer. To fix this, you need to install drivers on the same video card, sound card and other devices.

For your convenience, guide pages have also been created with links to driver kits and applications for the most different models laptops:

  • Lenovo:
  • Asus:
  • Acer, Packard Bell and eMachines: Drivers for Acer, eMachines and Packard Bell laptops

The search for a driver for your laptop or computer should generally start from here:. There is a whole article on webcam drivers:. The article is small and quite useful.

Also, the following forum topics can greatly help you in finding a driver for your laptop or computer:

  1. . The first message has a small guide to finding and installing the correct driver;
  2. . Pay special attention to the first post of the topic;

While searching for a solution to a problem on the forum Special attention give the first posts of various topics. They usually contain typical solutions most common problems, and there are also extensive collections of drivers and instructions on what to do with everything.

They can help you during the problem solving process. There are answers to the most frequently asked questions.

Installing programs and utilities

So. Somehow figured out the drivers. Now there are programs and utilities. Here the situation is complicated by the fact that each manufacturer has its own set of proprietary utilities. With those utilities, some system drivers. Therefore, it is often impossible to ignore their installation. Some of them are really needed normal operation laptop, namely for the operation of additional keys, for the operation of the indication, for the webcam, for wireless adapters, and so on.

How these utilities are approximately installed and what to do with them in general on the example of laptops Asus shown in the manual: . Per device Acer, eMachines and Packard Bell installing utilities is reduced to installing launch manager, on laptops HP - HP Quick Launch Buttons and so on. You can discuss proprietary utilities in this forum thread:.

If you have problems with drivers and some programs that are designed for Windows XP, in Windows Vista or Windows 7, then I recommend that you read this article:.

That's all.

All questions that are related to installing Windows 7, please ask in this forum thread:, questions on installing Windows Vista in this thread:. Once again I remind you that before asking, read the topic. Your question has most likely already been asked and answered.

  • Working with the Windows automatic installation system on a laptop

    Detailed description of the operation of the automatic Windows Recovery with programs and drivers up to the state at the time of purchase of the laptop. The main part of the article concerns hidden sections on the winchester.

  • Solving the problem with an inverted camera image

    Solving the problem with an inverted image from a laptop webcam.

  • Installing and running Windows XP on Windows 7, Windows Vista, or another operating system

    Description of how to install and run the full version Windows XP from under Windows Vista or Windows 7 using the program Oracle Virtual Box . In this case, Windows XP is installed in a virtual machine and runs as a standalone application on Windows Vista, Windows 7, or any other operating system, including various Linux distributions. This way you can solve compatibility problems various programs and drivers with Windows Vista, Windows 7 or other operating system.



    • Loading...
    Top